Compatibility: Atomos Shinobi, Ninja V, Flame, and Inferno Series Pan: 360° Tilt: 180°
Suitable for cameras weighing between 0.5kg. - 3kg.
* Suitable for camcorders & DSLR cameras * Supports up to 4.5kg. * Create smooth Steadicam shots * Fine trip adjustment on both axes * Quick release camera plate The HDMC Hague HD Motion-Cam Stabilizer has been specifically designed for the current range of HD camcorders such as the Sony Z1, FX1, V1, Panasonic HVX200,...
GoPro curve-bk Steadicam Curve for GoPro HERO Action Cameras Black
Fits HERO, HERO2, and HERO3
Fits HERO3+ and HERO4
Handheld Mechanical Stabilization
Provides Isolation from Shake/Vibration - create smooth handheld video footage
Helps Reduce "Rolling Shutter"
Handle Folds for Transport
Extremely lightweight and small enough to carry in your pocket
Requires LCD BacPac
Mounting Screw Holes: 1/4" and 3/8", Handle: 1/4" Battery Life: Up to 10 hours Ports: USB, charging Battery : Capacity: 800 mAh ,Volatge: 11.1 V Indicators: Battery level (25%, 50%, 75%, and 100%) Payload : 2.6 lb (1.1 kg) Weight With Single Handle: Approximately 2.2 lb (1 kg) with battery
Came-TV LBVL4A (LBVL 4A, LBVL/4A, L/BVL4A, L BVL4A) 2.5-15kg Load Pro Camera Steadicam Vest+ Dual Arm.
Max. Length: 102cm (40in) Mini Length: 70cm (28in) Load Capacity: 2-12kg (4.4-26lbs)
Features: Height of monitor bracket can be adjusted flexibly and be rotated in all direction Head of Baseplate with Power, AV and HDMI connector Included is a low-shooting bracket The 3 lines built in the carbon fiber post, no worried for attrition
Came-Tv CAME-SPRY (CAME SPRY, CAMESPRY, CAME/SPRY) 4 In 1 Gimbal With Detachable Head.
In an effort for 100% customer satisfaction we would like you to know all the basic steps and information before purchasing our gimbals to insure that you know what goes into owning one.
The CAME-TV SPRY is our innovative 4-in-1 gimbal that comes with three different heads that can be quickly interchanged to hold a smart phone, GoPro, and point-and-shoot cameras up to 1.1 lbs . When using most Sony cameras (ex: Sony RX100), there are 4 buttons located on the handle that will allow you to control the camera directly such as zooming in out, picture focus, and image capture/video record. The included Bluetooth remote will control an iPhone when coupled with the "BT Shutter" application.
The pan motor can be configured on either side of the camera to provide efficient cable routing and access to either side of the cameras and phone. All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.
The SPRY Battery Foot is an optional part that includes a larger battery for longer run time and has threaded mounting incorporated in the base to allow mounting. Some creative mounting options could be a skateboard or underslung on a car, the threaded mount allow for mounting to a fixed object.
Weight With Battery: 3.63 lbs (1.65kg) Without Battery: 3.42 lbs (1.55kg)
Payload: 5kg / 11 lbs Netweight: 2.6 kg / 5.7 lbs
Specifications Item Imperial Metric Load-bearing 6.17 lb 2.8kg Material Aluminum Alloy, Carbon Fiber, Stainless Steel Quick Release Plate 3.62 x 1.97 x 0.35 inch 92 x 50 x 9mm Top Stage 2.36 x 2.36 x 0.59 inch 60 x 60 x 15mm Upper Post Diameter 0.55 inch 14mm Lower Post Diameter 0.7 inch 18mm Net...
Came-TV EVA-U1 (EVA-U-1, EVAU1, EVA/U1, EVA U1) Shoulder Rig For Panasonic AU-EVA1.
Our Panasonic AU-EVA1 Shoulder Rig is designed to work with the AU-EVA1. The base plate features a shoulder pad, two rosettes on the front and 15mm rails. The shoulder pad is designed for comfort along with balance when resting on your shoulder. The rosettes allow for mounting of handles or other accessories on either side of the base plate.
Came-TV C200-PK01 (C200-PK-01, C200PK01, C200/PK01, C200 PK01) Shoulder Rig For Canon EOS C200 PK01.
Accessorizing your Canon C200 camera with the CAME-TV Top Handle and Shoulder Base Plate provides you with a solution for quick shoulder mounting featuring a handle with accessory mounting holes The top handle is great for low shooting and provides an easy way to carry the camera around.
The heart of this kit is the low profile base plate that features a quick release system to easily attach and detach the base. There is a shoulder pad built into the base plate is designed for comfort along with balance when resting on your shoulder. There are two 15mm rod holes that run through the base that allows front and/or back mounting of 15mm rods. The included extension arm allows for attaching a handle or hand grip.
Came-TV C200-PK03 (C200-PK03, C200PK03, C200/PK03, C200 PK03) Shoulder Rig For Canon EOS C200 With Mattebox Follow Focus PK03.
Accessorizing your Canon C200 camera with the CAME-TV Top Handle and Shoulder Base Plate provides you with a solution for quick shoulder mounting featuring a handle with accessory mounting holes The top handle is great for low shooting and provides an easy way to carry the camera around.
The heart of this kit is the low profile base plate that features a quick release system to easily attach and detach the base. There is a shoulder pad built into the base plate is designed for comfort along with balance when resting on your shoulder. There are two 15mm rod holes that run through the base that allows front and/or back mounting of 15mm rods. The included extension arm allows for attaching a handle or hand grip.
Came-TV C200-BS01 (C200-BS-01, C200BS01, C200/BS01, C200 BS01) Top Handle And Base Plate Kit For Canon EOS C200 BS01.
Accessorizing your Canon C200 camera with the CAME-TV Top Handle and Base Plate provides you with a solution for quick tripod mounting featuring a handle with accessory mounting holes The top handle is great for low shooting and provides an easy way to carry the camera around.
The heart of this kit is the base plate that features a quick release system to easily attach and detach the base. There are two 15mm rod holes that run through the base that allows front and/or back mounting of 15mm rods. There is a dovetailed tripod plate that provides quick and secure mounting to a tripod.
Came-TV C200-BS03 (C200-BS-03, C200BS03, C200/BS03, C200 BS03) Canon EOS C200 Rig With Mattebox And Follow Focus BS03.
The CAME-TV Canon EOS C200 Rig With Mattebox And Follow Focus is a fully professional motion picture camera rig designed to withstand the demands of the modern production environment.
Came-TV C200-KT01 (C200-KT-01, C200KT01, C200/KT01, C200 KT01) Shoulder Rig For Canon EOS C200 KT01.
Accessorizing your Canon C200 camera with the CAME-TV Top Handle and Shoulder Base Plate provides you with a solution for quick shoulder mounting featuring a handle with accessory mounting holes The top handle is great for low shooting and provides an easy way to carry the camera around.
The heart of this kit is the base plate that features a quick release system to easily attach and detach the base. There is a shoulder pad built into the base plate is designed for comfort along with balance when resting on your shoulder. There are two 15mm rod holes that run through the base that allows front and/or back mounting of 15mm rods. The included extension arm allows for attaching a handle or hand grip.
Came-TV A7S2-PACK (A7-S2-PACK, A7S2PACK, A7S2/PACK, A7S2 PACK) Protective Cage Plus For A7S2 & A7R2 Camera With Mattebox Follow Focus.
Your modular cage is designed to fit the Sony A7RII and Sony A7SII perfectly. The Sony A7RII and A7SII share the exact same body dimension. This cage provides easy access to the battery allowing you to replace it without removing the camera from the cage. CNC Machined from aluminum this cage is light weight and very strong. There are lots of threaded holes on the cage to attach accessories. The included base plate and handle have 15mm rod hole(s) which allows for mounting accessories and expanding the rig.
Features Multiple threaded holes Modular assembly HDMI Locks CNC machined aluminum
Features Multiple threaded holes Modular assembly HDMI Locks CNC machined aluminum
Came-TV URSA-MINI-PRO-PACK (URSA-MINI/PRO-PACK, URSAMINI-PRO-PACK, URSA/MINI-PRO-PACK, URSA MINI-PRO-PACK) URSA Mini Pro & URSA Mini Rig.
CAME-TV rig for the Blackmagic URSA Mini Camera/URSA MINI PRO has a top handle assembly and a shoulder mount assembly that both attach directly to the camera body. The top handle is very sturdy and features many mounting holes for attaching accessories. The shoulder mount has a comfortable pad that is great for long shoots. The base has 2 rosettes for mounting of the arm on either side and has two 15mm rod holes to expand the rig's capability. The included arm will allows attaching a handle or hand grip. The base is compatible with the VCT-U14 plate which allows for rapid mount or dismounting of the camera from the tripod.
Came-TV URSA-MINI-PACK (URSA-MINI/PACK, URSAMINI-PACK, URSA/MINI-PACK, UR SAMINI-PACK) URSA Mini Follow Focus Mattebox Rig.
The URSA Mini Rig is a professional kit that includes a top handle and quick release base plate that includes a padded shoulder rest. The top handle features a 15 mm rod hole that allows mounting a rod for attaching accessories. The base plate has a quick release base plate for easy adjustment, mounting and removal of the padded shoulder rest. There are two rosettes on the base plate which provide for mounting the included front arm on either side for right or left hand operation. The adjustable front arm allows you to mount your favorite handle to round out the rig.
