Supported Storage : 2.5" SSDs and HDDs with a thickness of 9.55 mm or slimmer Packaging Info Package Weight : 0.4 lb Box Dimensions (LxWxH) : 4.9 x 3.4 x 2.9"
Extreme recording and shot speed up to 450MB/s Ready to shoot cinema-quality 4K video (4096x2160p) Built for broadcast, cinema, and photography professionals Unprecedented transfer speeds of up to 525MB/s Designed in parallel with leading-edge camera manufacturers 128GB: up to 525MB/s Read, up to 450MB/s Write Card Dimensions: 1.7" x 1.4" x 0.13" (43 mm x...
Capacity: 1200GB
Power Input: 100-240V Power Consumption: 20W Operating Temperature: 32 ~ 104°F (0 ~ 40°C) Dimensions Approx.: 5 x 1.4 x 2.5" (127 x 35 x 63mm) Weight: 11 oz (310g) Package Weight: 1.0 lb Box Dimensions: (LxWxH) 6.9 x 4.6 x 3.9"
Capacity: 128GB Read Speed: up to 300 MB/s Write Speed: up to 299 MB/s
Voltage: 14.4V Capacity: 95Wh Max Output Power: 50W Max Output Current: 3.5A Over Current Protection: 10A Mount Type: V-mount Operation temperature: 0- 40°c Net Weight: Approx 0.76kg Dimension: 134x88x52mm
HedBox RP-DLI90 (RP_DLI90, RP DLI90 , RPDLI90, RP/DLI90) (DLI109/DLI90, D/LI109/DLI90, D LI109/DLI90) Battery Charger Plate for PENTAX D-LI109/DLI90 for RP-DC50/40/30
This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of PENTAX DLi90 type batteries.
Model : UNIX V-Mount Adapter Power Plate Battery Mount : V-Lock Mount D-Tap Power Out 1 : DC 12V ~ 16.8V / 10A / 148W (Max) unregulated D-Tap Power Out 2 : DC 12V ~ 16.8V / 10A / 148W (Max) unregulated D-Tap Power Out 3 : DC 12V ~ 16.8V / 10A / 148W...
Model : UNIX-7V2 V-Mount Adapter Power Plate Battery Mount : V-Lock Mount D-Tap Power Out 1 : DC 12V ~ 16.8V / 10A / 148W (Max) unregulated D-Tap Power Out 2 : DC 12V ~ 16.8V / 10A / 148W (Max) unregulated D-Tap Power Out 3 : DC 12V ~ 16.8V / 10A / 148W...
Capacity: 64GB Read Speed: up to 300 MB/s Write Speed: up to 299 MB/s
Power input: AC 100V-240V 50/60Hz Charging output: DC 8.4V, 2A×2 Adapting output: DC 8.4V, 3.5A Applicable battery: S-8BG6, Panasonic VW-VBG6 Dimension: 136×110×47mm Weight: 0.36kg
Amp-Hours 2670.00 mAh Maximum Output Voltage 7.4 VDC Chemistry Lithium-Ion
Payload 4kg/8.8lb (upgrade) Tilt angle +90°/-60° Counter balance FIX Drag mode FIX Camera plate Quick release slide plate Plate attachment 1/4 screw with video pin Weight 3.6kg/7.9lb Height 77 to 150cm/30.3” to 59” Ball diameter 65mm Section 2 STAGE
Designed for: HedBox, CANON Use to charge: BP Charging Voltage: 8.4V Charging Current: 600mAh Dimensions: 5.1 x 6.3 x 1.1cm Weight: 20g Package: Plastic Blister Pack
Form Factor PCIe computer card Bus Interface PCI Express 2.0 x1 Peripherals Supported Industry standard USB 3.0, 2.0, and 1.1 peripherals Bus Powered Peripherals Supported HDs, SSDs, DVDs, and Blu-ray devices up to 2A per port(2) Cables Supported USB 3.0 with Standard-A male connector, USB 2.0 with Standard-A male connector(1) Chipset Fresco Logic RoHS Compliant...
Came-Tv CAME-SPRY (CAME SPRY, CAMESPRY, CAME/SPRY) 4 In 1 Gimbal With Detachable Head.
In an effort for 100% customer satisfaction we would like you to know all the basic steps and information before purchasing our gimbals to insure that you know what goes into owning one.
The CAME-TV SPRY is our innovative 4-in-1 gimbal that comes with three different heads that can be quickly interchanged to hold a smart phone, GoPro, and point-and-shoot cameras up to 1.1 lbs . When using most Sony cameras (ex: Sony RX100), there are 4 buttons located on the handle that will allow you to control the camera directly such as zooming in out, picture focus, and image capture/video record. The included Bluetooth remote will control an iPhone when coupled with the "BT Shutter" application.
The pan motor can be configured on either side of the camera to provide efficient cable routing and access to either side of the cameras and phone. All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.
The SPRY Battery Foot is an optional part that includes a larger battery for longer run time and has threaded mounting incorporated in the base to allow mounting. Some creative mounting options could be a skateboard or underslung on a car, the threaded mount allow for mounting to a fixed object.
Model : RP-DC50 Intelligent Dual Digital LCD Battery Charger AC Power In : AC 110 – 240V , 50/60Hz DC Power In : DC 12 – 24V Power Consumption : Max 55W Power Output 1 : DC 8.4V – 16.8V / 1500mA Boost Power / 800mA Standard (auto-change the voltage according to the installed optional...
General: Capacity : 128GB Form Factor : SD Card Technical: Interface : SDXC, SD 4.0, UHS-II Features : Write protection by mechanical switch, wear leveling, power management for low power usage, ECC, water resistant Performance: Sustained Read Speed : 300 MB/s Sustained Write Speed : 260 MB/s Reliability: Data Reliability : ECC function Certifications :...
Features: Suited for various camcorders up to 77 cm and 30.3 inch Water-resistant 1000 denier Cordura® exterior Reinforced inlays with soft padded interior for maximum protection Separate pockets for additional accessories 11 Soft padded and adjustable dividers to customize interior layout Padded suede shoulder strap and handles for optimum carrying comfort Strong, high quality YKK®...
Battery Capacity: 143Wh (14.4V/ 9.9Ah) Max.Output Voltage: 16.8V DC Nominal Voltage : 14.4V DC Maximum Discharge Current: 14A ‡ D-Tap: 80W each USB: DC 5.0V / 2.3A End Voltage: 11V Battery Protection: Reverse charge, Over charge, Over discharge, Over current, Temperature protection Ambient Temperature: To charge: 0°C ~ 40°C (10°C ~ 30°C recommended), To discharge:...
Power Requirements: AC100V～240V 50/60Hz Power consumption: 46W DC supply: [36W] 12V / 3.0A Charging Voltage: 16.4V Dimensions (W x H x D): 128 x 45 x 98mm Mass: 340g Operating Temperature: [DC supply]-5 ℃～+45℃, [Charge] 0℃～+45℃ Approx. charge times BP-U90: 190 minutes Approx. charge times BP-U60: 150 minutes Approx. charge times BP-U30: 130 minutes
Model: UNIX-BM V-Mount Adapter Power Plate Battery Mount: V-Lock Mount D-Tap Power Out 1: DC 12V ~ 16.8V / 10A / 148W (Max) unregulated D-Tap Power Out 2: DC 12V ~ 16.8V / 10A / 148W (Max) unregulated D-Tap Power Out 3: DC 12V ~ 16.8V / 10A / 148W (Max) unregulated USB Output: DC...
Core SWX CORE-PBE-A7FZ (CORE-PBE-A7FZ, CORE-PBE-A7FZ, CORE-PBE-A7FZ, CORE-PBE-A7FZ) PowerBase EDGE Small Form Cine V-Mount Battery Pack 49wh 14.8v Includes PB70C15 charger and FZ100 cable
The follow-up to the highly successful Powerbase70, the Powerbase Edge is a feature-rich "small-form" Cine and DSLR pack, in a V-Mount form. The 14.8v Lithium Ion pack includes one 8v port to power various cameras, two USB output, and two power tap outputs, one of which being a SmartTap.
The 8v port provides a common power output for the majority of DSLRs and small-form cine cameras on the market which utilize small 7.4v Li-Ion battery packs. There are an assortment of dummy battery cable attachments available which insert into that 8v port. In addition to powering the camera, two on-board powertaps are accessible to power monitors, lights, wireless transmitters, etc. The two available USB ports are a welcoming addition to power/charge mobile devices on the fly, as well as power any 5v accessories(i.e. select audio recorders).
As it is often difficult to approximate runtime when powering the camera as well as multiple devices, the Powerbase Edge has a built-in runtime LCD, to deliver exact battery expectancy to the minute. The LCD also has a button activated backlight to be view-able in any environment. As with it’s predecessor, the Edge has a quick release plate to attach underneath the camera, or quickly attach/detach to a rig or camera cage. It is 30% smaller than the Powerbase 70 yet can still withstand the draw of a full size Cinematic cameras.
Dimensions Interior: 19 x 13.5 x 3.25" / 48.3 x 34.3 x 8.3 cm Exterior: 20.5 x 15.0" x 4.5" / 52.1 x 38.1 x 11.4 cm Weight: 1.5 lb / 0.68 kg
