Here at DigiBroadcast, we stock an extensive range of audit accessories from windshields and boompoles to a host of different cables that offer top quality from some of the industry’s most elite brands. Whether you have been searching audio accessories for your studio, business or even personal use then our extensive range should satisfy your needs. If you are wanting to extend or establish a collection of audio accessories we have a diverse selection, from Sennhieser to DPA. If it’s audio spares that you have been looking for, discover more here at DigiBroadcast.
Connector 1 : HDMI Type-A Male Connector 2 : HDMI Type-D Male Cable Length : 12 to 24" / 30.5 to 61 cm Maximum Resolution Support : 3840 x 2160 at 60 Hz HDMI Version : 2.0 Packaging Info Package Weight : 0.1 lb Box Dimensions (LxWxH) : 9.3 x 4.5 x 0.8"
Teradek TER-BIT118 ( TERBIT118, TER/BIT118, TER-BIT118, BIT118 ) 2-Pin Lemo to PowerTap - Approx 45cm
Features:
Specifications for d:dicate™ MMP-C Compact Preamp Output connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase Low-cut frequency, -3 dB: 15 Hz Noise with shorted input, A-weighted: 0.6 µV Output voltage, RMS: > 4 V Output voltage, peak: > 5.6 V Type of electronic circuit: Active THD@1VRMS, 1kHz: < 0.2...
Connector 1 : HDMI Type-D Male Right Angle Connector 2 : HDMI Type-A Male Cable Length : 11.8 to 17.7" / 30 to 45 cm Packaging Info Package Weight : 0.1 lb Box Dimensions (LxWxH) : 6.5 x 5.0 x 0.1"
12inch 3Pin Male to Female Xlr Cable
Dimensions: 100.00mmH x 0.00mmW x 0.00mmD
Connectivity Networking Ports: 1 x 10Gb Ethernet (RJ45) Host Connection: PCIe 3.0 x4 (Full-Height/Low-Profile Slot) General Supported IEEE Standards: 802.1qav, 802.3az Operating System Support: Linux, Windows, macOS/OS X Jumbo Frames Support: 16,352 Bytes Wake on LAN: No Electrical Power Source: Bus Powered Physical Certifications: RoHS, as per Manufacturer Cable Length: 328.08' / 100 m
Weight: 580.00g Dimensions: 2100.00mmH x 32.00mmW x 32.00mmD
Sennheiser 505454 (505-454, 505/454, 505 454, 50-54-54) (MZH600, MZH/600, MZH-600) MZH 600 Wind Shield Softie for MKE 600
For outside broadcasting – a combined foam windshield and hairy cover that reduces wind noise most effectively.
Packaging Info Package Weight: 0.15 lb Box Dimensions (LxWxH): 3.2 x 1.4 x 0.2"
Teradek TER-BIT012-1 (TER/BIT012/1, TER_BIT012_1, BIT-012-1, BIT012-1, ter-bit012-1, 11-0012-1) Hotshoe Mounting Hardware for Fanless Bolt
This is a Hot Shoe Mount from Teradek for fanless Bolt transmitters. It features a 1.75" thumbscrew.
Compatible Mic Diameter: 0.82 to 0.88" / 21 to 22.5 mm Inner Depth: 6.25" / 160.5 mm Material: Faux Fur Weight: 50.00g Dimensions: 100.00mmH x 100.00mmW x 185.00mmD
Card Type: CompactFlash / SD / microSD Dimensions: 66 x 62 x 15mm / 2.6” x 2.4” x .6” Weight: 70g / 0.15lb
DPA 3506 (DPA3506 DPA-3506 DPA/3506) d:dicate™ 4006A Stereo Kit
The DPA 3506 is a complete 4006-TL Stereo Kit with two carefully factory-matched phantom powered (P48) condenser microphones. The DPA 3506 also includes a Stereo Boom and the complete range of DPA Acoustic Modification Accessories, all in a sturdy carrying case with a foam insert.
The specially selected DPA 4006-TL microphones are matched within +/- 0.5 dB on both frequency range, sensitivity and self noise. The maximum phase response difference from 50 Hz to 20 kHz is 10 degrees. The high sensitivity, the low noise-floor and the extremely linear frequency response from 15 Hz to 20 kHz (+/-2 dB) of the microphone pair makes the DPA 3506 the perfect choice for all professional A-B Stereo recordings.
DPA 4006 is one of the most popular types in the DPA microphone range and is a worldwide reference thanks to its precise, detailed and natural reproduction. For more than 20 years it has impressed studio owners and broadcasters as well as musicians and engineers thanks to its transparent sound quality. It is one of the most sought after studio microphones in the industry - and the one that gives you the most value for your money.
In striving to achieve an even cleaner sound, the 4006-TL is equipped with a state-of-the-art transformerless preamplifier and is powered via a standard 48 V Phantom Power supply. This design increases the sensitivity and provides an extended low-frequency handling capability (15 Hz to 20 kHz ±2 dB). All components in this construction are very carefully selected to fulfil the demand for optimal neutrality, accuracy and extremely low distortion even at very high sound pressure levels and at complex passages in the music.
The applications of 4006-TL are numerous: AB stereo pair for symphonic concert hall recordings, close mic on instruments such as grand piano, guitar, double bass, percussion and speech/vocals, just to mention a few examples where a 4006-TL will give more detail and more open resolution.
With the acoustic modification accessories it is possible to gain different frequency responses and directional characteristics with just one 4006-TL. You simply change a grid and it will influence the sound field acoustically without any phase shift, noise or distortion, that any electrical filter will introduce.
4006-TL is a product for sound engineers with demands for high quality. The precise reproduction, total transparency and natural-sounding clarity of this microphone will provide you with a lifetime of satisfying listening.
DPA 3511 SPECIFICATION: High SPL Capability - 158dB Great for spot-miking on every kind of live music Often used for A-B stereo recordings (pair), close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals Principle of operation: Pressure gradient Cartridge type: 19 mm (0.75 in) pre-polarised condenser Power supply: 48 V Phantom...
Panasonic PAN-AJMH800G ( AJMH800G, PANAJMH800G, PAN/AJMH800G, PAN AJMH800G) Microphone Holder HPX2100
The Panasonic AJ-MH800G is a microphone holder for the AJ-HDX900 camcorder.
The holder will house a standard shotgun microphone and is ideal for news gathering, weddings, documentary, and sports.
Weight: 22.00g Dimensions: 31.00mmH x 105.00mmW x 208.00mmD
Material: Faux Fur Outer Diameter: 3.2" / 8 cm Length: 3.2" / 8 cm Weight: 25.00gm Dimensions: 80.00mmH x 80.00mmW x 80.00mmD
Weight: 105.00g Dimensions: 94.00mmH x 60.00mmW x 130.00mmD
Technical Data: Transducer principle (Microphone) Pre-polarised condenser microphone Frequency response (microphone) 30.....20000 Hz +- 1 dB Nominal impedance 200 Ohm Min. terminating impedance 1000 Ohm Phantom Output voltage 2 V Phantom Battery Specification 12 - 48 V 1x Typ IEC LR 06 Phantom Current consumption 2,2 mA (netto) Operating time (Battery) max. 150 h (netto)...
Sound pressure level (SPL) : 154 dB Transducer principle : dynamic Pick-up pattern : super cardioid Sensitivity : 1,6 mV/Pa
