Acoustic Principle : Dynamic Active Electronics : Analogue signal conditioning + A/D and USB interface Polar Pattern: Cardioid Resolution: 18-bit Sampling Rate: 8-48kHz Address Type: End Frequency Range: 40Hz - 14kHz Output Impedance: 0Ω Maximum SPL: 115dB SPL (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL)...
Sennheiser MKE 600 (MKE600, MKE-600) Microphone Description Features: Maximum attenuation of background noise Low-cut filter for minimizing wind noise Phantom (P48) or battery powered Battery switch incl. Low Batt indicator Rugged, all metal housing The MKE 600 is the ideal video camera/camcorder microphone able to handle even demanding filmic challenges. Due to its high directivity,...
The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled...
Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery package A includes:
1x Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery (NTG4PLUS)
1x Rode WS6 Deluxe windshield (WS6)
*Digibroadcast has put together some bespoke Rode packages for our clients based on our own research and surveys and holds the right to protect all of its content ©
Acoustic Principle : Dynamic Active Electronics : Analogue signal conditioning + A/D and USB interface Polar Pattern: Cardioid Resolution: 18-bit Sampling Rate: 8-48kHz Address Type: End Frequency Range: 40Hz - 14kHz Output Impedance: 0Ω Maximum SPL: 115dB SPL (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL)...
Short Shotgun Condenser Mic with super-cardioid polar response & HPF. 48V powered. Supplied with pouch, RM5 stand mount & WSVM windshield. The RØDE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a...
Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery package B © includes:
1x Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery (NTG4PLUS)
1x Rode WS6 Deluxe windshield (WS6)
1x Rode PG2-R Pistol Grip and shock mount (PG2-R)
1x Digibroadcast XLR 12" CABLE (12INCHXLR3PIN)
*Digibroadcast has put together some bespoke Rode packages for our clients based on our own research and surveys and holds the right to protect all of its content ©
Acoustic Principle Line Gradient Active Electronics JFET impedance convertor with balanced transformer output Capsule 0.50" Polar Pattern Supercardioid Address Type End Frequency Range 20Hz - 20kHz Output Impedance 250Ω Maximum SPL 131dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level 6.9mV Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/-...
MKE 600 (MKE600, MKE-600) Microphone - supplied with Foam wind Shield and Shock Mount Features: Maximum attenuation of background noise Low-cut filter for minimizing wind noise Phantom (P48) or battery powered Battery switch incl. Low Batt indicator Rugged, all metal housing The MKE 600 is the ideal video camera/camcorder microphone able to handle even demanding...
r-cardioid polar response & HPF. 48V powered. Supplied with pouch, RM5 stand mount & WSVM windshield. Suspension shock mount (stand adaptor). A shotgun microphone suspension shock mount with a stand mount adaptor. Designed to reduce vibration transmission to shotgun microphones. Features a 4-way rubber suspension with friction tilt mechanism, and a 3-way mounting...
Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery package C includes:
1x Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery (NTG4PLUS)
1x Rode WS6 Deluxe windshield (WS6)
1x Rode SM3R Camera Shoe Shock Mount (SM3R)
1x Rode Boom Pole (3m) (BOOMPOLE)
1x Digibroadcast 5m 3 pin XLR cable (5METERXLR3PIN)
*Digibroadcast has put together some bespoke Rode packages for our clients based on our own research and surveys and holds the right to protect all of its content ©
Acoustic Principle Line Gradient Active Electronics JFET impedance convertor with balanced transformer output Capsule 0.50" Polar Pattern Supercardioid Address Type End Frequency Range 20Hz - 20kHz Output Impedance 250Ω Maximum SPL 131dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level 6.9mV Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/-...
The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low...
Article No. 505453 Technical Data and Specification of MKE 600 Dimensions: diameter 20 mm, length 256 mm Microphone: super-cardioid/lobar Frequency response: 40 Hz to 20 kHz Max. sound pressure level: 132 dB SPL at P48; 126 dB SPL with battery powering Weight: 128 g (without battery) Sensitivity in free field, no load (1kHz): 21...
EK 100 G4: RF characteristics: Modulation Wideband FM Frequency range GB: 606 - 648 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth up to 42 MHz Nominal/peak deviation...
Short Shotgun Condenser Mic with super-cardioid polar response & HPF. 48V powered. Supplied with pouch, RM5 stand mount & WSVM windshield. RØDE Microphones releases the Blimp, an all new suspension windshield for use with professional shotgun microphones. The new RØDE Blimp is a complete windshield and shock mounting accessory, designed to accommodate the RØDE NTG-1,...
The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled...
The NTG-3 is the result of years of development by RØDE engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.Using a technology known as RF-bias the RØDE NTG-3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue.In...
EK 100 G4: RF characteristics: Modulation Wideband FM Frequency range GB: 606 - 648 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth up to 42 MHz Nominal/peak deviation...
Revolutionary Acoustic Design The NTG5’s body design has been completely overhauled, with circular acoustic ports replacing the linear slots found in other shotgun mics. The revolutionary design – the result of many months of specialised testing – delivers unmatched acoustic transparency, and a natural, uncoloured sound that will sound superb in a wide variety of...
The NTG-3 is the result of years of development by RØDE engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.Using a technology known as RF-bias the RØDE NTG-3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue.In...
The NTG-3 is the result of years of development by RØDE engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.Using a technology known as RF-bias the RØDE NTG-3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue.In...
Revolutionary Acoustic Design The NTG5’s body design has been completely overhauled, with circular acoustic ports replacing the linear slots found in other shotgun mics. The revolutionary design – the result of many months of specialised testing – delivers unmatched acoustic transparency, and a natural, uncoloured sound that will sound superb in a wide variety of...
Transducer Condenser Polar Pattern Line-gradient supercardioid Frequency Response 40 Hz to 20 kHz Dynamic Range (Typical) 117 dB Signal-to-Noise Ratio 81 dB SPL (A-weighted) Maximum Input Sound Level 130 dB Power Requirements 48V Phantom power Nominal Impedance 25Ω Output Connectors 3-pin XLR Pad No Low Frequency Roll-Off No Dimensions (L x Diam) 10 x 0.74"...
