Sennheiser MEB 114-S Cardioid Boundary Microphone (Black)

Sennheiser  505615 (505-615, 505/615, 50-56-15, 505 615) (MEB/114-S, MEB114-S, MEB-114-S) MEB 114-S Cardioid Boundary Microphone (Black)

The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.

Colour: black, white , nextel grey , LED light ring: red / green 

Dimensions: 85 x 100 x 25 mm (WxDxH) 

Connector: clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal) 

Frequency response: 40 Hz – 20 kHz 

Max. sound pressure level: 140 dB 

Transducer principle: pre-polarized condenser microphone 

Weight: 291 g 

Pick-up pattern: cardioid 

Nominal impedance: 200 Ω 

Phantom powering: P 24 - P 48 

Operating temperature: -10 ° … +50 °C 

Equivalent noise level: 29 dB (A) 

Equivalent noise level weighted as per CCIR 468-3: 39 dB (CCIR) 

Current consumption: 5.3 mA 

Output voltage: Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V 

Output voltage: Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V 

Acoustics: boundary layer microphone 

Dynamic range: 111 dB (A) 

Sensitivity: 10 mV/Pa

MEB 114 Microphone

Quickguide

Cable