DPA ST2011C, ST2011 C, ST2011-C, ST2011/C Stereo Pair w. 2 x 2011C, Clips, Windscreens in Peli Case
Sell Your Gear
warranty on this product

DPA ST2011C, ST2011 C, ST2011-C, ST2011/C Stereo Pair w. 2 x 2011C, Clips, Windscreens in Peli Case

code: ST2011C
  • £1,414.83
  • RRP: £1,530.00
Status   |   Usually dispatched within 24 hours
Loading...
Make An Offer
Ask a Question
Price Match
Add to Compare

DPA ST2011C (ST2011 C, ST2011-C, ST2011/C) Stereo Pair w. 2 x 2011C, Clips, Windscreens in Peli Case

 

FEATURES:

  • Sensitivity selected pair
  • Superb stage separation and level control
  • Low profile mounting options
  • PeliTM Case transportation and protection

The DPA ST2011C is a complete DPA 2011C Stereo Pair with two handpicked cardioid microphones, selected on sensitivity within ±1.5 dB making several stereo principles like XY and ORTF easy to obtain.

The compact design and controlled directionality of our versatile 2011Cs make them an excellent choice for spot mics for classical recording and on-stage close mics for live sound.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.

Included in this kit:

  • Two carefully matched 2011C cardioid microphones, sturdy PeliTM case, holders, grids and windscreens.

 

 

Specifications for d:dicate™ ST2011C Stereo Pair with 2011C Compact Cardioids

Directional pattern: Cardioid
Principle of operation: Pressure gradient, with interference tube
Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
Frequency range: 20 Hz - 20 kHz
Frequency range, ± 2 dB, at 30 cm: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)
Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak
Dynamic range: Typ. 117 dB
Max. SPL, peak before clipping: 146 dB
Minimum load impedance: 2 kohm
Output impedance: < 200 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 50 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Weight: 64 g (2.3 oz)
Microphone diameter: 19 mm (0.75 in)
Microphone length: 92 mm (3.6 in)
Output voltage, RMS: > 4 V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB

 

Be the first to review ST2011C, ST2011 C, ST2011-C, ST2011/C Stereo Pair w. 2 x 2011C, Clips, Windscreens in Peli Case. Write a review ›