Teradek Wireless Transmission

Connector: RP-SMA Female Frequency Range: 2.4 and 5.1-5.8 GHz Output Power: 2 dBi Length: 6" / 15 cm Diameter: Base: 0.5" / 1.2 cm Tip: 0.25" / 0.6 cm Weight: 0.6 oz / 17 g

Find Out More

Wireless Wireless Range: 750' / 228.6 m (Line-of-Sight) # of Channels: 13 (40 MHz) 25 (20 MHz) Channel Bandwidth: 40 MHz, 20 MHz Frequency Range:Non-DFS Frequencies US: 5.19 to 5.23 GHz US: 5.75 to 5.79 GHz DFS Frequencies US: 5.27 to 5.67 GHz Latency: < 0.01 ms RF Power: 17 dBm Wireless Video Compression: Uncompressed...

Find Out More

Teradek TER-10-2200 (TER/10/2200, TER_10_2200, TER102200, 10-2200, ter-10-2200) Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft

Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.

INCREASED AGILITY

Small form factor and lighter weight enable greater freedom of movement

ADDED VALUE

Improved feature set from previous Bolt generations at the same introductory price

ZERO-DELAY 4K WIRELESS VIDEO

Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).

TRANSMITTER:

Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)

Output: 1x 3G-SDI (up to 1080p60)

RECEIVER:

Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)

TRUE HDR

Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.

IMPROVED WIRELESS PERFORMANCE

Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.

SEND SIGNAL UP TO 6 RECEIVERS

Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.

LIGHTWEIGHT BODY WITH VERSATILE MOUNTING

TX Mounting: M3 / ¼”-20

RX Mounting: M3 / ¼”-20 / ⅜”x16

UNIVERSAL CROSS-COMPATIBILITY BETWEEN ALL BOLT 4K DEVICES

Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.

CAMERA METADATA

Transmit metadata, timecode, and start/stop flags from most camera manufacturers.

BOLT APP FOR ANDROID AND APPLE IOS

Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.

Features: Real-time LUT box HDMI/SDI cross-converter Camera control bridge Integrates with Pomfort LiveGrade Pro Feature-rich iOS UI for configuration and control Simple WebUI for network configuration OLED LCD Display with joystick navigation buttons On/Off switch Powered USB 2.0 host port CDL/1024 1D LUT (supports 10-bit colour) 33x33x33 3D LUT (supports 10-bit colour) Custom OSD tools...

Find Out More

Video - Video Inputs 1 x SD/HD/3G-SDI (75 Ohm BNC) Video Outputs 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC) Sdi Ancillary Data Support supports metadata, timecode, and start/stop flags from certain camera manufacturers. Color Sampling SDI: YCbCr 4:2:2, 8-bit Delay Tx To Rx <0.001sec (without format conversion) Supported Resolutions - Supported Resolutions 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30...

Find Out More

Colour: Yellow Compatibility: Teradek Bolt 1000/3000 Transmitters

Find Out More

Colour: Blue

Find Out More

Colour: Green Compatibility: Teradek Bolt 1000/3000 Transmitters

Find Out More

Colour: Red Compatibility: Teradek Bolt 1000/3000 Transmitters

Find Out More

Colour: Yellow Compatibility: Teradek Bolt 1000/3000 Receivers

Find Out More

Colour: Blue Compatibility: Teradek Bolt 1000/3000 Receivers

Find Out More

Colour: Green Compatibility: Teradek Bolt 1000/3000 Receivers

Find Out More

Colour: Red Compatibility: Teradek Bolt 1000/3000 Receivers

Find Out More

Features : Real-time wireless LUT box with camera control - dual 3G-SDI Outputs 2 independent 10-bit 33pt 3D LUTs simultaneously Integrated with Pomfort LiveGrade, SpectraCal CalMAN, and FoolControl Panasonic, ARRI, RED and Pahtom remote camera control Dimensions: 50.8 x 25.4 x 101.6 mm (2” x 1” x 4”) Weight: 170.1g (6oz) Video Inputs 1x 3G/HD/SD-SDI:BNC...

Find Out More

Teradek TER-BIT0009 (TER/BIT0009, TER_BIT0009, BIT0009, BIT-0009, ter-bit0009) Antenna Cap for 3rd Generation Bolt RX

This Antenna Cap from Teradek is a replacement part for the third generation Bolt 500 receivers.

Features: H.264 (AVC) Decoder SDI/HDMI GbE WiFi Dual-Band 2.4/5.8 GHz WiFi, Ethernet and USB Interfaces HDMI and SDI Video Outputs (Outputs 1080p/30) Camera Top Form Factor Built-In Scaler OLED Display Powers by AC Adapter or 2-pin Connector Battery Outfitted for 1/4" Mounting In The Box 1 x 2-pin Connector to 18W AC Power Adapter 1...

Find Out More

Teradek TER-LINK ( TERLINK, TER LINK, TER/LINK, LINK ) TER-LINK High performance 802.11ac WiFi access point built for the video industry

Features :

• High performance 802.11ac WiFi access point built for the video industry
• Housed in an aluminum chassis with a variety of clever mounting options, Link fits seamlessly onto DIT carts, light stands, and just about anywhere on set
• Connects Serv and Field Monitor with maximum range and reliability

Teradek TER-BEAMANT (TER/BEAMANT, TER_BEAMANT, BEAMANT, TERBEAMANT, ter-beamant) Beam Antenna Replacement

Replacement Wireless Antenna for Beam

Features : H.265 (HEVC) and H.264(AVC) Camera Top Encoder - Ethernet Only Real-Time H.265(HEVC) and H.264(AVC) Encoder Ethernet and USB Interfaces (No WiFi) HDMI and SDI Video Inputs Camera Top Form Factor Built-In Color Grading On-Board SD Card Recording Two-Pin LEMO-Type Power Input  

Find Out More

Features : H.265 (HEVC) and H.264(AVC) Camera Top Encoder Real-Time H.265(HEVC) and H.264(AVC) Encoder Dual-Band 2.4/5.8 GHz WiFi, Ethernet and USB Interfaces HDMI and SDI Video Inputs Camera Top Form Factor Built-In Color Grading On-Board SD Card Recording Two-Pin Connector-Type Power Input In the Box 1 x Cube 755 2 x 2dBi Antennas (2.4/5.8 GHz)...

Find Out More

Features : Real-Time H.265/H.264 (HEVC/AVC) Decoder Ethernet and USB Interfaces (No WiFi) HDMI and SDI Video Outputs (Outputs 1080p/30) Camera Top Form Factor Built-In Scaler OLED Display Powers by AC Adapter or 2-pin Connector Battery Outfitted for 1/4" Mounting  

Find Out More

Features : Decodes over Ethernet and dual-band Wi-Fi HDMI and 3G-SDI outputs Supports high-profile HEVC and H.264 compression Decodes at up to 1080p60 Supports RTP/RTSP, MPEG-TS, TDS Dual Band 802.11ac Wi-Fi     

Find Out More

Features : H.264(AVC) Decoder SDI/HDMI GbE Ethernet and USB Interfaces (No WiFi) HDMI and SDI Video Outputs (Outputs 1080p/30) Camera Top Form Factor Built-In Scaler OLED Display Powers by AC Adapter or 2-pin Connector Battery Outfitted for 1/4" Mounting  

Find Out More

Teradek TER-BOND657 ( BOND657, TER/BOND657, TERBOND657, TER-BOND657 ) Bond USB + Cube 655

Features :

• Bond USB + Cube 655

CUBE 655

• Dual HDMI/HD-SDI Input
• 802.11ac Wi-Fi
• 10/100/1000 Gigabit Ethernet
• Bidirectional IFB
• 3D LUT & CDL Color Management
• ShareLink™
• IFB: Allows the studio to communicate with remote camera crews
• More..

BOND USB

• Stream over up to 5 3G/4G/LTE connections - USB Connections
• Convert your Cube 600, 700, and 800 series into a 5-modem cellular bonding powerhouse
• Stream over a combination of 5 3G/4G/LTE modems, Ethernet, and WiFi, allowing you to achieve higher bit rates and more bandwidth redundancy than with traditional streaming methods
• More..