Redpro RP-DC50 Intelligent Dual Battery Charger

Redpro RP-DC50 (RPDC50, RP DC50, RP/DC50, rp-dc50) Digital Dual Battery Charger

The RP-DC50 Digital Dual Battery Charger Charges Two Batteries Simultaneously, drawing power from either an AC wall source (an AC cord is included) or a 12/24V DC power source (a DC car charger is also included). Additionally, the Duo Charger Features a USB Power Output to Charge other Devices with a USB Power Input. With protection against overcharging, overheating, and short circuit, the Duo Charger safely and quickly recharges up to two compatible Li-ion Batteries and one USB-powered device. With two Slot Battery Plates, the Intelligent Charger can be used for World Brand Battery Models that run on 14.4V like REDPRO RP-BPU80 or Sony BP-U. The Intelligent Charger Features an LCD Display that Graphically Shows Charge Status for both Batteries. This allows you to switch from Low charging mode to High that give you function of Super Fast Charging process. Also the function of pre-charging and lithium battery zero-volt (0,0V) activation function can effectively  extend battery life.

With Protection against Overcharging, Overheating, and Short Circuit, the Duo Charger safely and quickly Recharges up to Two Compatible Li-Ion Batteries and one USB-Powered Device.

FUNCTION:

1. Wide range compatibility.

2. It can charge 1 or 2 digital Li-ion battery pack REDPRO RP-BPU80 or Sony BP-U30 / BP-U60 / BP-U90

3. Intelligent control MCU can automatically identify the voltage of the battery, going intelligent charge when being charging, and prevent overcharge.

4. Dual charging port design. It can charge two batteries at the same time.

5. LCD display. Battery power level show, the percentage of power level, and current mode.

6. Charging type is CC/CV with well reliability and high efficiency.

7. Implemented backlight in the LCD screen, readout is enabled in the dark, that give you clear possibility to use this charger at any place and any time.

7. Function of pre-charging and lithium battery zero-volt (0,0V) activation which can effectively  extend battery life.

8. Low and High Charging Mode - Fast and Slow charging process for battery packs.

9. USB 5V 2.1A DC Output for charging USB Devices

10. Also charges the BPU85D

Such is the reliability of RedPro products, All RedPro products come with a 2 year manufacturer's warranty

• Charger Model: RP-DC50 Intelligent Digital Dual Battery Charger
• Power Requirements AC: AC 110-240 V , 50/60 Hz
• Power Requirements DC: DC 12 – 24 V / 3000mA (Max)
• Power Consumption: Max 55 W
• Power Output (H) : DC 8.4V - 12.6V - 16.8V  / 1500mA x1 or 800mA x2 (Batt Slot)
• Power Output (L) : DC 8.4V - 12.6V - 16.8V  / 1000mA x1 or 500mA x2 (Batt Slot)
• DC Power Input: DC 12 – 24 V / 45W (Max)
• USB Power Output: DC USB 5V , 2100 mA (Max)
• Operating Temperature: 0 to 40 oC ( 32 to 104 oF )
• Dimensions (WxHxD): 12.4 x 11.4 x 4.45 cm | 4.9 x 4.5 x 1.75” inch
• Weight (Gram,Pound,Ounce): 218 g | 0.48 lbs. | 7.7 oz.
• Charging Method: RP-DC50 Pre-Charging 0,0V activation and CC/CV charging metod for all Li-Ion Battery Packs