Sony 4K Base Band Processor Unit

Sony BPU-4000 (BPU4000, BPU 4000, BPU/4000, bpu-4000) 4K Base Band Processor Unit

The BPU4000 works with the CA4000 to route 4K signals from the PMW-F55 Super 35mm 4K CMOS sensor camera. The BPU4000 generates 4K and HD signals at a similar colour matrix to match to the current Sony HD camera system, 4K and HD signal outputs simultaneously. The BPU4000 works with the HDCU-2000/2500 to permit the same system operation as the current HDC camera system.

Routes 4K signals from the PMW-F55 camera fitted with CA4000 4K fibre transmission adaptor

The BPU4000 works with the same range of Remote Control Panels (RCPs) and Master Setup Units (MSUs) as current HDC Series system cameras, providing a future-proofed migration path for customers. The system works across standard SMPTE fibre cables for distances up to 2,000m.

General

• Power Requirements: AC 100V to AC 240V, 50/60Hz
• Operating Temperature: 5C to 40C (41F to 104F)
• Storage Temperature: -20C to +60C (-4F to +140F)
• Weight: Approx 6.8kg (15lbs)
• Dimensions (WxDxH): 424 x 66 x 395mm (16.7 x 2.6 x 15.6") excluding protrusions

Input/Output Connectors

• Camera: Optical Fibre x1
• CCU: Optical Fibre x1
• Remote: 8-pin multi-connector x1
• LAN: 8-pin x1
• SDI Input: BNC x2, 3G-SDI: SMPTE ST424/425 Level-B, 2.970Gbps/2.967Gbps, HD-SDI: SMPTE ST292, 0.8 Vp-p, 75-Ohm, 1.485Gbps/1.4835
• Reference Input : BNC x1, HD: SMPTE ST274, tri-level sync, 0.6Vp-p, 75-Ohm
• SD: Black burst (NTSC: 0.286 Vp-p, 75-Ohm, PAL: 0.3Vp-p, 75-Ohm
• 3G/HD-SDI output: BNC x18, 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8Vp-p, 75-Ohm, 2.970Gbps / 2.967Gbps, HD-SDI: SMPTE ST292, 0.8Vp-p, 75-Ohm, 1.485Gbps / 1.4835Gbps, 3G-SDI / HD-SDI selectable
• HD-SDI Output: BNC x2, SMPTE ST292, 0.8Vp-p, 75-Ohm, 1.485Gbps / 1.4835Gpbs
• Reference Output: BNC x1, HD: SMPTE ST274, tri-level sync, 0.6Vp-p, 75-Ohm, SD: Composite sync, 0.3Vp-p, 75-Ohm)

In the box

• Sony BPU-4000 4K Base Band Processor Unit