Supports: RT Motors Dimensions: Not Specified by Manufacturer Weight: Not Specified by Manufacturer
Teradek TER-11-1441-1 (TER-11-1441-1, TER-11-1441-1, TER-11-1441-1, TER-11-1441-1) White Marking Disc for MK3.1 Controller - Set of 8.
The White Marking Disk for RT MK3.1 Controller (8-Pack) from Teradek works with the RT MK3.1 hand unit. Use this beveled disk for marking focus distances or iris stops. With this pack of eight, you can pre-mark disks with the engraved focus distances on each of your frequently used lenses, saving time on set. Marks from non-permanent and china markers are easily removed; use isopropyl alcohol to clean notations made with permanent markers.
Power Power Input Controller includes slot for a Canon LP-E6 Battery: 6.2 to 8.4 V USB Port: 4.75 to 9 V (maximum) Interfaces Connectors 1 x 5-pin locking connector for Wired Mode 5pin serial + usb for monitor interface, wired control, USB Mini Run/ Stop Control RED (Epic, Scarlet, Weapon, Raven, etc.) ARRI (Alexa, Amira,...
Teradek TER-15-0041 (TER/15-0041, TER/15/0041, TER150041, TER 15 0041) Controller Right Hand with Run-Stop Control
Control Focus/Iris on Canon EF Lenses via Internal Motors on RED Cameras Control Teradek Brushless lens motors Use up to two Thumbwheels Simultaneously Configure to any axis Right-Hand Model.
Teradek TER-15-0040 (TER/15-0040, TER/15/0040, TER150040, TER 15 0040) Controller Left Hand with Run-Stop Control
Control Focus/Iris on Canon EF Lenses via Internal Motors on RED Cameras Control Teradek Brushless lens motors Use up to two Thumbwheels simultaneously Configure to any axis Left-Hand Model.
Maximum Torque: 2.2 nm Dimensions: 4.5 x 1.6 x 1" (115 x 40 x 26 mm) Weight: 7.5 oz (212 g)
Measurements: 1 x Pre-Marked Focus Ring with 0.25m Minimum Focus, 1 x Pre-Marked Focus Ring with 0.5m Minimum Focus, 1 x Pre-Marked Focus Ring with 1m Minimum Focus, 1 x Pre-Marked Focus Ring with 2m Minimum Focus, 1 x Pre-Marked Focus Ring 3m, Minimum Focus, 1 x Pre-Marked Iris Ring, 1-32 Dimensions: Not Specified by...
Interfaces -Connectors 1 x Power input 3 x Motor ports 2 x Slave controller inputs 1 x CAM (Camera control port): 6-pin LEMO 0B 1 x USB: Mini-USB (firmware updates) Runstop ControlIncluding but not limited to: ARRI ALEXA, ALEXA Mini, AMIRA, etc. Blackmagic Canon C100, C300 (MkII+), C500 Panasonic Varicam Phantom RED DSMC2, DSMC, ONE...