Shape Paparazzi I with 15mm Rod Block

code: SH-PA001BLOC
  • 169,52 â‚¬
  • RRP: 205,49 â‚¬
Status   |   Usually dispatched within 24 hours
Loading...

Features 

  • Twenty 1/4", 3/8", 1/2" Screw-Holes
  • Mounts 15mm Rods
  • Male-Threaded Rods Screw into 1/2" Holes
  • Totally Solid Anodized Aluminum

Shape SH-PA001BLOC (SH_PA001BLOC, SHPA001BLOC, SH/PA001BLOC, SH PA001BLOC) Paparazzi I with 15mm Rod Block

The Shape Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4" screws.

The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid -- not at all hollow -- and are both water cut / laser cut, as opposed to being molded.

The 20 screw-holes are a mix of 1/4", 3/8" and 1/2" sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4" and 3/8" holes can take on most any 1/4" and 3/8" accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2" holes you can screw in male-threaded SHAPE rods.

The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.

Dress Up Your Rig

  • Mounts 15mm rods and keeps an ergonomic Handle parallel with the camera
  • Features mix of twenty 1/4", 3/8" and 1/2" screw-holes for attaching accessories
  • The 1/2" holes let you screw in male-threaded rods and thus further extend your rig
  • Takes on lights, monitors, mics, grips, remotes, recorders, arms, receivers, rods, etc.
  • Fully solid and water / laser cut, and the holes run completely through from end to end

 

  • Mount Type: Handle: Total of twenty 1/4"-20, 3/8"-16 and 1/2"-13 screw-holes, Bloc: Two 1/4"-20 screw-holes, The Bloc is compatible with optional 15 mm rods
  • Build: Totally solid, water cut / laser cut anodized aluminum

Packaging Info

  • Package Weight: 1.75 lb
  • Box Dimensions (LxWxH): 11.5 x 9.3 x 3.1"

In the box

  • Shape Paparazzi with Bloc
  • Paparazzi I Handle
  • Rod Block for Paparazzi
Be the first to review Paparazzi I with 15mm Rod Block. Write a review ›