Slik Sliding Arm II

code: 3467
  • 72,94 â‚¬
  • RRP: 72,94 â‚¬
Status   |   Usually dispatched within 24 hours
Loading...

Features

The arm can be moved back and forth, up and down

  • In a typical low-position setting with conventional tripod, the camera is set in the center position of the tripod, so the distance between the camera and the subject is far away. However, when you attach the Sliding Arm II, you can move the camera position closer to the subject.

Set the camera to even lower position

  • Sliding Arm II allows to set the camera to a position even lower than the conventional low position setting.

Balance weight hook for safety

  • It is equipped with a weight hook at the opposite end of the arm. If you hang the bag or any, using a commercially available carabiner, it can be used it as a counter weight. The counter balance prevents the tripod from falling over because the center of gravity of the camera shifts greatly from the center of the tripod.
Set the camera for "bird's eye view"
  • Take a "bird's-eye view" picture from directly above through the table.

Sliding Arm II - 3467

SLIK Sliding Arm II is a horizontal column which can be mounted onto a tripod.

Attaching a head on the tip of the column allows you to shoot straight downwards giving a “bird’s eye” view.

Rosset clamp will securely hold the sliding arm at any angle position.

This is quite popular accessory for cooking video.

Specifications

  • Load Capacity: 2.0 kg
  • Length: 497mm
  • Sliding Stroke: 370mm
  • Weight: 530g
  • Pipe Diameter:  〇 24mm
  • Tripod Mounting Screw: U1/4・U3/8
  • Others: U1/4 head mounting screw

In The Box

  • 1x Sliding Arm II
Be the first to review Sliding Arm II. Write a review ›