Libec NX-300MQ Tripod System w/ Mid-Level Spreader

Libec NX-300MQ Tripod System w/ Mid-Level Spreader(NX-300MQ)

This NX-300Q Tripod System from Libec features 2-stage legs with an 88.1 lb load capacity, a 75mm fluid head, a compatible ground spreader, and a carrying case to bring it to the set. Intuitive adjustment of pan, tilt, and counterbalance makes for a customizable experience. Aluminum construction creates a lightweight and durable tripod design.

Libec NH30 75mm Ball/Flat Base Video Head with Pan Handle (22 lb Payload)

Designed to support small camera rigs weighing up to 22 lb, the NH30 75mm Ball/Flat Base Video Head with Pan Handle from Libec features a unified ball/flat mount design. The base of the tripod can fit either in a standard 75mm bowl or on a flat mount with a 3/8"-16 screw. Having both options available means you can transfer the head from a tripod with a bowl mount to a flat mount slider.

To achieve proper balance, the NH30 head includes a snap-on/off camera plate that can slide up to 1.2" of fore/aft adjustment, and it features 1/4"-20 and 3/8"-16 camera mounting screw options. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide smooth movement. On the side, there are 1/4"-20 and 3/8"-16 threads to mount a variety of accessories such as a light, monitor, or extension arm.

Included with the NH30 is a pan handle that can be placed on the right or left side of the head by screwing it onto one of the mounts. The LED-illuminated bubble level helps to level the camera on uneven surfaces, even in low light.

Libec QL40B 2-Stage Lightweight Aluminum Tripod with 75mm Bowl

The QL40B 2-Stage Lightweight Aluminum Tripod with 75mm Bowl from Libec is a durable tripod capable of accommodating larger cine rigs thanks to its 88.1 lb load capacity. A 75mm bowl head allows you to integrate a wide variety of fluid heads into your tripod configuration. A 21.6 to 71.6" working height range of the 2-stage legs can be adjusted using the flip-style quick locks. Three 1/4"-20 and 3/8"-16 threads on the legs allow you to integrate additional accessories.

Libec Long Sliding Plate S for TH-X, TH-Z, NH10 & NH30 Heads

This Long Sliding Plate S from Libec helps to properly balance a heavier camera or camera rig with a longer lens on select tripod heads. This 9.4" long plate is constructed from an aluminum alloy and offers a 3.7" sliding range. It is compatible with Libec TH-X, TH-Z, NH10, and NH30 heads, as well as select Manfrotto and Sachtler heads.

Counterbalance Range 0 to 10kg / 0 to 22lb(C.G.55mm)

Payload 10kg / 22lb

Counterbalance Free plus 5STEP

Drag mode Free plus 3STEP

Drag system Multilayered Metal Structure

Tilt angle +90° to -70°

Temperature range -40°C to +60°C / -40°F to +140°F

Bubble level Illuminated

Camera plate Sliding plate compatible

Compatible with Manfrotto and Sachtler heads

Sliding range +/-30mm / +/-1.2"

Long sliding plate Included

Head attachment 75mm ball / Flat base

Plate attachment 1/4" screw with video pin

Accessory attachment Head: 1/4” and 3/8 screw holes

Tripod: 3 sets of 1/4” and 3/8” screw holes

Spare screw 1/4" and 3/8" screws

Weight 4.9kg / 10.8lb

Height 91 to 197.5cm / 35.8 to 77.7"

Head attachment 75mm bowl

Pipe material Aluminium

Section 2-Stage

In the Box

Head:NH30

Tripod: QL40B

Spreader: BR-2B

Large rubber feet：FP-1B

Case: RC-40