The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled...
Revolutionary Acoustic Design The NTG5’s body design has been completely overhauled, with circular acoustic ports replacing the linear slots found in other shotgun mics. The revolutionary design – the result of many months of specialised testing – delivers unmatched acoustic transparency, and a natural, uncoloured sound that will sound superb in a wide variety of...
Acoustic Principle: Line Gradient Active Electronics: JFET impedance convertor with bipolar output buffer Capsule: 0.50" Polar Pattern: Supercardioid Address Type: End Frequency Range: 20Hz - 20kHz Output Impedance: 50Ω Maximum SPL: 139dBSPL Maximum Output Level: 6.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2...
Acoustic Principle: Line Gradient Active Electronics: JFET impedance convertor with balanced transformer output Capsule 0.50" Polar Pattern: Supercardioid Address Type: End Frequency Range: 20Hz - 20kHz Output Impedance: 250Ω Maximum SPL: 131dBSPL Maximum Output Level: 6.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2...
Acoustic Principle: Line Gradient Active Electronics: RF Bias Capsule: 0.50" Polar Pattern: Supercardioid Address Type: End Frequency Range: 40Hz - 20kHz Output Impedance: 25Ω Maximum SPL: 130dBSPL Maximum Output Level: 8.2mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise...
Acoustic Principle: Line Gradient Active Electronics: RF Bias Capsule: 0.50" Polar Pattern: Supercardioid Address Type: End Frequency Range: 40Hz - 20kHz Output Impedance: 25Ω Maximum SPL: 124dBSPL Maximum Output Level: 8.2mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise...
Analog Performance Operating Principle: Line Gradient Transducer: Condenser Diaphragm: 0.50" / 12.70 mm Polar Pattern: Supercardioid Frequency Range: 40 Hz to 20 kHz Equivalent Noise Level: 20 dB A-Weighted Maximum SPL: 134 dB SPL Pad: -10 dB, -20 dB THD: 1% Impedance: 200 Ohms Sensitivity: -38 dB at 1 kHz Low-Cut Filter: @ 80 Hz...
Short Shotgun Condenser Mic with super-cardioid polar response & HPF. 48V powered. Supplied with pouch, RM5 stand mount & WSVM windshield. The RØDE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a...
r-cardioid polar response & HPF. 48V powered. Supplied with pouch, RM5 stand mount & WSVM windshield. Suspension shock mount (stand adaptor). A shotgun microphone suspension shock mount with a stand mount adaptor. Designed to reduce vibration transmission to shotgun microphones. Features a 4-way rubber suspension with friction tilt mechanism, and a 3-way mounting...
Short Shotgun Condenser Mic with super-cardioid polar response & HPF. 48V powered. Supplied with pouch, RM5 stand mount & WSVM windshield. RØDE Microphones releases the Blimp, an all new suspension windshield for use with professional shotgun microphones. The new RØDE Blimp is a complete windshield and shock mounting accessory, designed to accommodate the RØDE NTG-1,...
The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled...
Acoustic Principle Line Gradient Active Electronics JFET impedance convertor with balanced transformer output Capsule 0.50" Polar Pattern Supercardioid Address Type End Frequency Range 20Hz - 20kHz Output Impedance 250Ω Maximum SPL 131dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level 6.9mV Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/-...
Acoustic Principle Line Gradient Active Electronics JFET impedance convertor with balanced transformer output Capsule 0.50" Polar Pattern Supercardioid Address Type End Frequency Range 20Hz - 20kHz Output Impedance 250Ω Maximum SPL 131dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level 6.9mV Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/-...
The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low...
The NTG-3 is the result of years of development by RØDE engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.Using a technology known as RF-bias the RØDE NTG-3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue.In...
The NTG-3 is the result of years of development by RØDE engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.Using a technology known as RF-bias the RØDE NTG-3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue.In...
The NTG-3 is the result of years of development by RØDE engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.Using a technology known as RF-bias the RØDE NTG-3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue.In...
Transducer Condenser Polar Pattern Line-gradient supercardioid Frequency Response 40 Hz to 20 kHz Dynamic Range (Typical) 117 dB Signal-to-Noise Ratio 81 dB SPL (A-weighted) Maximum Input Sound Level 130 dB Power Requirements 48V Phantom power Nominal Impedance 25Ω Output Connectors 3-pin XLR Pad No Low Frequency Roll-Off No Dimensions (L x Diam) 10 x 0.74"...
Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery package A includes:
1x Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery (NTG4PLUS)
1x Rode WS6 Deluxe windshield (WS6)
*Digibroadcast has put together some bespoke Rode packages for our clients based on our own research and surveys and holds the right to protect all of its content ©
Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery package B © includes:
1x Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery (NTG4PLUS)
1x Rode WS6 Deluxe windshield (WS6)
1x Rode PG2-R Pistol Grip and shock mount (PG2-R)
1x Digibroadcast XLR 12" CABLE (12INCHXLR3PIN)
*Digibroadcast has put together some bespoke Rode packages for our clients based on our own research and surveys and holds the right to protect all of its content ©
Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery package C includes:
1x Rode NTG4PLUS Directional Condenser Microphone with Inbuilt Battery (NTG4PLUS)
1x Rode WS6 Deluxe windshield (WS6)
1x Rode SM3R Camera Shoe Shock Mount (SM3R)
1x Rode Boom Pole (3m) (BOOMPOLE)
1x Digibroadcast 5m 3 pin XLR cable (5METERXLR3PIN)
*Digibroadcast has put together some bespoke Rode packages for our clients based on our own research and surveys and holds the right to protect all of its content ©
Acoustic Principle: Dynamic Active Electronics: Analogue signal conditioning + A/D and USB interface Polar Pattern: Cardioid Resolution: 24-bit Sampling Rate: 44-96kHz Address Type : End Frequency Range: 40Hz - 14kHz Maximum SPL: 115dBSPL Sensitivity: -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz Power Options: USB bus powered Weight: 655.00g...
Acoustic Principle: RF-bias condenser Active Electronics: RF-bias demodulation Polar Pattern: Supercardioid shotgun Frequency Range: 20 Hz – 20 kHz Frequency Response: 100 Hz - 20 kHz ±3 dB // 50Hz - 20 kHz ±6 dB Output Impedance: 25 Ω Signal to Noise Ratio: 84 dB Equivalent Noise: 10 dB SPL (A-weighted, as per IEC651) Input...
Revolutionary Acoustic Design The NTG5’s body design has been completely overhauled, with circular acoustic ports replacing the linear slots found in other shotgun mics. The revolutionary design – the result of many months of specialised testing – delivers unmatched acoustic transparency, and a natural, uncoloured sound that will sound superb in a wide variety of...
