Rode NT1000 Studio Condenser Microphone
Sell Your Gear
warranty on this product

Rode NT1000 Studio Condenser Microphone

code: RODENT1000
  • 250,77 â‚¬
  • RRP: 289,20 â‚¬
Status   |   Usually dispatched within 24 hours
Loading...
Make An Offer
Ask a Question
Price Match
Add to Compare

Features:

  • HF2 1” capsule with gold-plated diaphragm
  • Cardioid polar pattern
  • True condenser (externally biased)
  • Full frequency response
  • Ultra low noise
  • High strength welded and heat-treated mesh head
  • Internal capsule shock mounting

Rode RODENT1000 (RODE-NT1000, RODE/NT1000, RODE NT1000, rode-nt1000, rode/nt1000, rode nt1000, NT1000, nt1000) Studio Condenser Microphone

The NT1000 1" Studio Condenser Microphone from Rode features transformerless circuitry, giving the mic an ultra-low self-noise level of 6 dBA. It can be used to capture audio for both vocal and instrument applications and is well-suited for grand piano and drum overheads. It is built with a 3-pin XLR connector and requires 24 or 48V phantom power to operate. Also included is a RM2 ring-mount microphone stand and a ZP1 padded zip pouch.
Cardioid Polar Pattern
  • The cardioid pick-up pattern is effective in minimizing noise from off-axis sections of the microphone such as monitors, instruments, room ambiance, etc.
Gold-Plated Diaphragm
  • The gold-plated diaphragm provides transparent signal reproduction and frequency response. The diaphragm is internally shockmounted, providing protection against potential damage.
Wide Frequency Response
  • The NT1000's 20 Hz to 20 kHz frequency response allows the microphone to be used in a variety of applications.
  • Acoustic Principle: Pressure Gradient
  • Active Electronics: Unity-gain closed-loop impedance converter; JFET input with bipolar buffering
  • Capsule: 1.00"
  • Polar Pattern: Cardioid
  • Address Type: Side
  • Frequency Range: 20Hz - 20kHz
  • Output Impedance: 100Ω
  • Maximum SPL: 140dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  • Maximum Output Level: 13.0dBu (@ 1kHz, 1% THD into 1KΩ load)
  • Sensitivity: -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Equivalent Noise Level (A-weighted): 6dB-A
  • Power Options: +48V phantom power+24V phantom power
  • Weight: 682.00gm
  • Dimensions: 209.00mmH x 54.00mmW x 54.00mmD
  • Output: XLR Output

In the Box

  • Rode NT1000 1" Studio Condenser Microphone
  • Stand Mount for NTK/NT1000 & Condenser Microphones
  • ZP1 Zip Pouch
Be the first to review RODENT1000 Studio Condenser Microphone. Write a review ›