Rode is a audio equipment manufacturer founded in Australia in 1967. It is one of the leading audio and sound brands on the market. Rode microphones range from consumer to professional products which are used in studio and on location sound recording with live sound reinforcement.
Acoustic Principle: Permanently Polarised Condenser Polar Pattern: Omni-directional Frequency Range: 20Hz - 20kHz Output Impedance: 3k Ω Typical Signal to noise Ratio: 67 dB Equivalent Noise: 27 dB Typical Maximum SPL: 110 dB Sensitivity: -35dB (17.8mV @94dB SPL) Dynamic Range: 83dB Typical Power Requirements: Powered from plug-in power TRS socket (2.7V) Output Connection: Gold-plated TRS...
Acoustic & Electrical Specifications Acoustic Principle: Pre-polarized pressure transducer Polar Pattern: Omnidirectional Frequency Range: 50Hz – 20kHz Maximum SPL (Mic): 100 dB SPL (1kHz @ 1m) dBu Maximum Input Level (3.5mm): -20dBV Microphone Preamp Gain: 20dB Equivalent Noise Level (A-Weighted): 22dBA Power Requirements: In-built rechargeable lithium ion battery charged via USB 5V, 0.3A Operating Time: Up to 7 hours Analog Inputs: 3.5mm TRS (lavalier microphone input) Analog...
Weight: 105.00g Dimensions: 94.00mmH x 60.00mmW x 130.00mmD
The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low...
Acoustic Principle: RF-bias condenser Active Electronics: RF-bias demodulation Polar Pattern: Supercardioid shotgun Frequency Range: 20 Hz – 20 kHz Frequency Response: 100 Hz - 20 kHz ±3 dB // 50Hz - 20 kHz ±6 dB Output Impedance: 25 Ω Signal to Noise Ratio: 84 dB Equivalent Noise: 10 dB SPL (A-weighted, as per IEC651) Input...
Material: Faux Fur Outer Diameter: 3.2" / 8 cm Length: 3.2" / 8 cm Weight: 25.00gm Dimensions: 80.00mmH x 80.00mmW x 80.00mmD
Acoustic Principle: Line Gradient Active Electronics: RF Bias Capsule: 0.50" Polar Pattern: Supercardioid Address Type: End Frequency Range: 40Hz - 20kHz Output Impedance: 25Ω Maximum SPL: 130dBSPL Maximum Output Level: 8.2mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise...
Weight: 54g Dimensions: 75mmH x 35mmW x 117mmD
Acoustic Principle: Pressure gradient electret condenser Polar Pattern: Supercardioid Frequency Range: 20Hz – 20kHz Frequency Response: 35Hz – 18kHz ±3 dB Output Impedance: 10Ω Signal to noise Ratio: 79 dBA Dynamic Range: 105dB SPL (A-weighted, as per IEC651) Equivalent Noise: 15dB SPL (A-weighted, as per IEC651) Sensitivity: -26 dB re 1V/Pa (50mV @ 94dB SPL)...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: Cardioid Address Type: End Frequency Range: 20Hz - 20kHz Output Impedance: 40Ω Maximum SPL: 128dBSPL Maximum Output Level: 2.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2...
Weight: 22.00g Dimensions: 31.00mmH x 105.00mmW x 208.00mmD
Analog Performance Sound Field: Mono Operating Principle: Pressure Gradient Transducer: Dynamic Tube: No Polar Pattern: Cardioid Frequency Range: 75 Hz to 18 kHz Pad: None Impedance: 320 Ohms Sensitivity: -56 dB at 1 kHz Low-Cut Filter: None General Output Connectors: 1 x 3-Pin XLR Length: 6.73" / 171 mm Diameter: 2.03" / 51.5 mm Weight:...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Polar Pattern: Supercardioid Address Type: End Frequency Range: 35Hz - 20kHz Output Impedance: 50Ω Maximum SPL: 141dBSPL Maximum Output Level: 5.2mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2...
Weight: 580.00g Dimensions: 2100.00mmH x 32.00mmW x 32.00mmD
Acoustic Principle: Pressure Gradient Active Electronics: Unity-gain closed-loop impedance converter; JFET input with bipolar buffering Capsule: 1.00" Polar Pattern: Cardioid Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 100Ω Maximum SPL: 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 13.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -36.0dB...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: Cardioid Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 100Ω Maximum SPL: 137dBSPL Maximum Output Level: 13.7mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: CardioidOmnidirectionalFigure8 Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL: 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 15.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -36.0dB re 1...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: CardioidOmnidirectionalFigure8 Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL: 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 16.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -36.0dB re 1...
Acoustic Principle : Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.75" Polar Pattern: Cardioid Address Type: End Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL: 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 9.5dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Polar Pattern: Cardioid Address Type: End Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL: 143dBSPL Maximum Output Level: 13.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity:-38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Polar Pattern: Cardioid Address Type: End Frequency Range: 20Hz - 20kHz Output Impedance: 100Ω Maximum SPL: 143dBSPL Maximum Output Level: 13.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Polar Pattern: Cardioid Address Type: End Frequency RangeP: 20Hz - 20kHz Output Impedance: 100Ω Maximum SPL: 136dBSPL Maximum Output Level: 8.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Polar Pattern: Cardioid Address Type: End Frequency RangeP: 20Hz - 20kHz Output Impedance: 100Ω Maximum SPL: 136dBSPL Maximum Output Level: 8.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Polar Pattern: Cardioid Address Type: End Frequency Range: 40Hz - 20kHz Output Impedance: 200Ω Maximum SPL: 135dBSPL Maximum Output Level: 6.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2...
Welcome to the extensive collection of Rode microphones and audio equipment at DigiBroadcast. Use the filters on the left of the page to find yourself amazing deals on single products and Rode microphone bundle packages, or read on below to find out more about this highly coveted microphone producer.
Australian brand Rode first began as Freedman Electronics in 1967 and quickly became the number one name in the country’s audio industry with their high quality amps, speakers and microphones. Over the years that followed, the brand name was changed to Rode but the company’s dedication to creating Australian-made high quality microphones and equipment did not, paving the way for the brand to become a globally recognised and admired brand.
Here at DigiBroadcast we stock all of Rode’s leading ranges, giving you a huge selection to choose from when shopping online. These popular ranges include the Rode Videomic, NT1, NTG3, NTR and K2 models, plus audio equipment, accessories and more.
Wherever you are in the world, you can enjoy Rode microphones and anything else from the DigiBroadcast online store thanks to our worldwide shipping! You can also find amazing deals on ex-demo and ex-display items in our used broadcast equipment range.
