Panasonic Lumix DMW-BGS1E Battery Grip for S1 and S1R

code: PAN-DMW-BGS1E

272,34 €
Secure yours with a deposit of
RRP: 294,11 €
|
|

Status | Usually dispatched within 24 hours

Add to Compare

LUMIX S Series Vertical Battery Grip, with Shutter Release & Focus Point Control Joystick

Provides a comfortable grip plus vertical grip shutter button.

Extended Battery Life – Grip holds 1 extra Panasonic DMW-BLJ31 batteries and extends cameras batter life for extended shooting time.

Durability – Splash / Dust / Freeze resistance.

Controls – Grip buttons can be used in the same way as the LUMIX S1R/S1. (Fn button, joystick, AF-ON, etc.)

Door Detection - Hall IC battery door open/close detection

Description
Specification
Reviews
(0)

Panasonic LUMIX DMW-BGS1E Battery Grip for S1 and S1R( PAN-DMW-BGS1E, PAN/DMW/BGS1E, PAN DMW BGS1E)

By using two batteries - one in the camera and other in the grip* - the DMW-BGS1 doubles the battery life for extended shooting. Charging the camera via USB simultaneously charges the battery in the grip. Exclusively designed for the LUMIX S1R/S1, this accessory also makes gripping more comfortable, even in vertical angle shooting.

Dimensions (W x H x D) Approx. 148.7 x 49.5 x 80.3 mm / 5.85 x 1.95 x 3.16 inch (excluding the projecting parts)

Weight Approx. 406 g / 0.895 lb (main unit and battery) Approx. 295 g / 0.650 lb (main unit and terminal cover)

Battery DMW-BLJ31 (li-ion battery pack: 7.4V, 3050mAh, 23Wh) (sold separately)

Battery Life* (CIPA standard) Approx. 660 images (rear monitor) with DC-S1R and S-R24105

Battery Life* (CIPA standard) Approx. 720 images (rear monitor) with DC-S1 and S-R24105

Battery Life* (CIPA standard) * One in the camera and another in the battery grip.

Operation Operation ON/OFF Switch Shutter Button Joystick AF ON Button White Balance Button ISO Sensitivity Button Exposure Compensation Button Front Dial Rear Dial Fn Button

Dust and Splash Resistant Yes

Dust and Splash Resistant *Dust and Splash Resistant does not guarantee that damage will not occur if this battery grip is subjected to direct contact with dust and water.

Operating Temperature -10 - 40 °C / 14 - 104 °F

Operating Humidity 10 - 80 %RH (no condensation)

Standard Accessory Terminal Cap

Be the first to review DMW-BGS1E Battery Grip for S1 and S1R. Write a review ›