Rycote 016908 Connbox CB8 (LEMO/XLR-3F Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB8 is suitable for Schoeps CMIT-5u + CCM M/S stereo pair.

An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings.

Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble.

The Connbox is made of the highest quality components, using a Gold 5-pin Neutrik X-series XLR connector, and an ultra soft Mogami star-quad cable.

Connbox 6 is suitable for a M/S stereo pair of Schoeps CCM in a mono extended ballgag with Lemo connectors

INPUT

Input connector: 1 x XLR 3F, 1 x Lemo

Input Connbox Connector: 2 x TA-3M Binder

Input Cable outside diameter: 2.5mm

Input Cable Exposed Length: ch1 120mm, ch2 250mm

Input Cable Band Colour: ch1 plain, ch2 green & red

OUTPUT

Output Connector: XLR – 5M

Output Connbox Connector: Hardwired

Output Cable Outside Diameter: 4.8mm

Output Cable Exposed Length: 420mm

Input Cable Band Colour: white

Included:

1 x Connbox CB8 (LEMO/XLR-3F Detachable)