DPA Location Sound Microphone Kit

DPA DLS4002 (DLS-4002, DLS/4002, DLS_4002, DLS 4002) Location Sound Microphone Kit

DPA’s Location Sound Microphone Kits has the crucial mics needed for all your standard location recording needs – shotguns for booming, micro shotguns for discreet plant miking and a range of lavaliers for close miking the talent. Each condenser microphone in the kit has been chosen based on the input of professional sound engineers working within film and broadcast. In addition to the mics, the kit includes 20+ extra cables, holders, concealers, adapters, clips and more. As soon as you open this massive location sound kit, you’re ready to roll.

Flexible condenser mics for on-location recording!

The supercardioid polar pattern focuses audio capture on the subject, reducing unwanted off-axis background sound and enhancing speech intelligibility. In addition, the mic has low self-noise, high sensitivity, and is capable of handling high SPLs, for natural undistorted results even during unpredictable shoots when a subject yells or shouts. The 4097 is optimized for speech with a flat-frequency response up until the 2 dB soft boost in the 10 kHz range providing the crisp presense typical of DPA microphones— clear, consistent sound that requires less postproduction tweaking.

Optimal powering is provided via 48V phantom power, although the mic will also run on 12V phantom power but at a reduced capacity to handle high SPLs. Similarly, the 4097 can operate on 5 to 10V from bodypack transmitters. It can also work on 3 to 4V from low-DC transmitters, but again the reduced power means the mic is more likely to distort if the talent or interview subject shouts or gets loud.

Flexible Postitioning

The 4" gooseneck and redesigned swiveling MicroDot connection offers a wide variety of positioning options to give you optimal sound with booms and wireless transmitters.

• Microphone Type: Shotgun
• Polar Pattern: Supercardioid
• Element Type: Electret Condenser
• Controls: None
• Frequency Response: 20 Hz to 20 kHz, 80 Hz to 15 kHz (at 7.9 " / 20.07 cm)
• Maximum SPL: 135 dB
• Analog Output: 1x Microdot
• Power Sources: Phantom Power / Plug-In Power
• Operating Voltage: 12 to 48 V (Phantom Power), 5.0 to 10.0 V

In The Box

Microphones

• 2x 4097 CORE Micro Shotgun Microphone
• 1x 4098 CORE Supercardioid Mic, White, MicroDot, 16 cm (6 in) Boom, full Gooseneck
• 2x 4060 CORE Omni Mic, Normal SPL, Beige, MicroDot 
• 2x 4061 CORE Omni Mic, Loud SPL, Black, MicroDot 
• 2x 4071 CORE Omni Mic, Presence Boost, Loud SPL, Black, MicroDot
• 1x 4661 CORE Heavy Duty Omni Mic, Loud SPL, Black, MicroDot 
• 2x 6060 CORE Omni Submini Mic, Normal SPL, White, MicroDot 
• 2x 6060 CORE Omni Submini Mic, Normal SPL, Beige, MicroDot 
• 2x 6061 CORE Omni Submini Mic, Loud SPL, Black, MicroDot 
• 2x 2017 Shotgun Microphone
• 2x 4017B Shotgun Mic
• 2x 4018C Compact Supercardioid Mic

Accessories

• 2x MMP-ES Preamp with Modular Active Cable, XLR, Side, 3 m (9.8 ft)
• 2x MMP-GR Preamp with Modular Active MicroDot Cable, Rear, 1.8 m (5.9 ft)
• 4x DUA0073 Foam Windscreen for 4017
• 2x DUA0041 Foam Windscreen for Pencil Mics with Active Cable
• 1x DUA6004 High Boost Grid for 4060 Series Lavalier and 4066/4266 Headset, beige, 5 pieces
• 1x DUA6002 High Boost Grid for 4060 Series Lavalier and 4066/4266 Headset, black, 5 pieces
• 2x DMM0011-B Magnet Mount
• 1x DMM0521 Concealer for Lavalier Microphone, 5 pieces
• 1x DMM0522 Concealer for 4660 Heavy Duty Lavalier Microphone, 5 pieces
• 2x CM1618B00 MicroDot Extension Cable, 1.6 mm
• 2x CM2218B00 MicroDot Extension Cable, 2.2 mm
• 4x DAD6003 Adapter for Sennheiser SK
• 4x DAD3056 Adapter for Lectrosonics LM, SM, UM Series (for Low DC Microphone)
• 1x DUA9302 Paintable Cap, 3 pieces
• 2x GSM4000 Gooseneck Shock Mount for Pencil Microphones
• 2x CSM4000 Compact Shock Mount
• 2x CM4099 Clamp Mount
• 2x UC4099 Universal Clip
• 2x DAD6001-BC Adapter MicroDot to 3-pin XLR
• 2x DUA9002 Shock Mount for Pencil Microphones