DJI M600 + Ronin-MX Bundle

DJI M600 + DJI Ronin-MX Bundle

DJI Matrice 600 Quadcopter with DJI Ronin-MX 3-Axis Stabilized Handheld Gimbal

DJI M600 (M 600, M-600, M/600, m600) Matrice 600 Hexacopter

MATRICE 600

The Matrice 600 (M600) is DJI’s new flying platform designed for professional aerial photography and industrial applications. It is built to closely integrate with a host of powerful DJI technologies, including the A3 flight controller, Lightbridge 2 transmission system, Intelligent Batteries and Battery Management system, for maximum performance and quick setup.

Total integration

The modular design makes the M600 easy to set up and ready to use in just minutes. Its dust proof propulsion

 systems simplify maintenance while actively cooled motors make for reliable operation during extended periods of time. All Zenmuse cameras and gimbals are natively compatible, and a maximum payload of 6 kg allows it to fly the Ronin-MX gimbal and a range of cameras from Micro Four Thirds systems to the RED Epic.

Smart Flight Safety

The M600 uses sine-wave driven, intelligent ESCs to ensure it performs accurately, safely and efficiently while

 A3’s self-adaptive flight systems adjust flight parameters automatically based on different payloads. The A3 can be upgraded with two additional GNSS and IMU units to A3 Pro or with D-RTK GNSS for enhanced accuracy.*

 

*A3 Pro and D-RTK GNSS are sold separately.

A3 PRO

With triple modular redundancy and diagnostic algorithms that compare sensor data from the three sets of units 

in real-time, the A3 Pro ensures that the M600 flies exactly as expected. 

D-RTK GNSS

The A3 GNSS system can be upgraded with centimeter-level accuracy. Using dual antennas, its heading reference is more accurate than a compass sensor, and it is able to withstand magnetic interference from metal structures. 

Designed for filmmakers and industrial applications 

Multiple gimbals supported including the Ronin-MX A3 and Lightbridge 2 built-in 

Extended flight time and long range transmission 

Professional HD transmission

Powerful app control

SDK supported

Upgradeable with A3 PRO and D-RTK GNSS

 

Note: When mounting the Ronin-MX to the M600, SRW-60G (coming soon) is needed for video transmission. Please purchase individually. (notice:SRW-60G is not permitted for use on aerial platforms in North America.)

The M600 features an extended flight time and a 5 km* long-range, ultra-low latency HD image transmission for accurate image composition and capture. 

By using 6 small DJI Intelligent Batteries, allowing it to easily be shipped to wherever it is needed.  A customized battery management system and power  distribution board allows all six batteries to be turned on with one button press, and keeps the system in flight in the event of a failure of a single battery, and allows users to check the battery status in real-time during flight.

DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting, offering high frame rates and HD live streaming. USB, mini-HDMI and 3G-SDI ports support video output at up to 1080p/60fps or a broadcast standard output of 720p/59.94fps and 1080i/50fps. 

The M600 supports the DJI GO app and the brand new DJI Assistant 2. Get a live HD view, battery status, redundancy status, transmission strength and much more, straight from the DJI GO app. DJI GO is also the control center for the camera, giving access to shutter speed, ISO, photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The brand new DJI Assistant 2 supports firmware updates and the new Ground Station, and comes with a built-in flight simulator.

The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building 

software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices including the 

 

Guidance sensor system, the RTK GNSS units or third party components of your choice.

DJI RONIN-MX (RONINMX, RONIN MX, RONIN/MX, ronin-mx) 3-Axis Stabilized Handheld Gimbal

Engineered For Professionals

Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrackâ„¢ algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise. 

Powerful And Accurate

Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon when mounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI’s flight controller and when attached to vehicles, it connects to an optional GPS module allowing it to stabilize actively for a smoother shot.

Freedom To Move

A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90° straight down and beyond to 135°. Popular features of the Ronin series such as the three modes of operation and SmoothTrackâ„¢ are also present, giving film makers a range of creative angles and movements.

Wireless Control And Transmission

The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 3.1miles (5km) away. If combined with the optional DJI Focus and Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/Stop add-on provides the ability to control shooting on a range of airborne cameras.

Comprehensive App Control

Using DJI Assistant and the dedicated Assistant app for iOS and Android allows complete customization of the Ronin-MX and its behavior. If connected to Lightbridge 2, the DJI GO app can be used to control how the M600 flies including Intelligent Flight Modes, remote control modes, move the gimbal and see an HD live feed from the camera.

Refined Balance

A redesigned structure moves the Ronin-MX battery from the back to the front. This centers the weight of the camera, minimizing instability when flying directly forwards. It also dramatically increases the Ronin’s agility and ability to handle rapid movements or high-G situations.

Magnesium Construction

 

Built extensively of lightweight magnesium, the Ronin-MX weighs just 6.11lb (2.77kg). This lightness allows it to be mounted to the M600 even when equipped with cameras as advanced as the RED EPIC, and to vehicles with a minimum impact on vehicle handling.

M600

Maximum Speed Horizontal (No Wind): 59.1 ft/s / (18 m/s)

Ascent: 16.4 ft/s (5 m/s)

Descent: 9.8 ft/s (3 m/s)

Maximum Wind Resistance 26.2 ft/s (8 m/s)

Maximum Altitude Above Sea Level: 8202.1' / 2500 m

Hovering Accuracy P-Mode with GPS:

Vertical: ±1.6' / 0.5 m

Horizontal: ±4.9' / 1.5 m

Maximum Angular Velocity Pitch: 300°/s

Yaw: 150°/s

Maximum Pitch Angle 25°

Hovering Time Six TB47S Batteries:

No payload: 35 minutes

13.2 lb / 6 kg Payload: 16 minutes

Six TB48S Batteries:

No payload: 40 minutes

12.1 lb / 5.5 kg payload: 18 minutes

Note: Hovering time is based on flying at 32.8' / 10 m above sea level in a no-wind environment and landing with 10% battery level.

Takeoff Weight Up to 33.2 lb / 15.1 kg

Flight Control System

Model A3

Transmitter

Frequency 5.725 to 5.825 GHz

2.400 to 2.483 GHz

Communication Distance 3.1 miles / 5 km

Transmitter Power 13 dBm at 5.8 G

20 dBm at 2.4 G

Connectivity 1 x HDMI

1 x SDI

1 x USB

Dual User Capability Master-and-slave control

Output Power 9 W

Operating Temperature 14 to 104°F / -10 to 40°C

Battery Type: Built-in

Chemistry: Lithium-ion polymer (LiPo)

Capacity: 6000 mAh

Configuration: 2S

Storage Temperature < 3 Months: -4 to 113°F / -20 to 45°C

> 3 Months: 72 to 82°F / 22 to 28°C

Charging Temperature 32 to 104°F / 0 to 40°C

Mobile Device Holder Supports smartphones and tablets

Maximum Tablet Width: 6.7" / 170 mm

Gimbal

Supported Gimbals Zenmuse X Series: X3, X5 & X5R, XT

Ronin Series: Ronin-MX

Z15 HD Series: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4

Flight Battery

Model TB47S

Chemistry Lithium-ion polymer (LiPo)

Capacity 4500 mAh

99.9 Wh

Configuration 6S

Weight 1.3 lb / 595 g

Maximum Charging Power 180 W

Operating Temperature 14 to 104°F / -10 to 40°C

Charging Temperature 41 to 104°F / 5 to 40°C

Storage Temperature < 3 Months: -4 to 113°F / -20 to 45°C

> 3 Months: 72 to 82°F / 22 to 28°C

Charger Model:A14-100P1A

Voltage Output: 26.3 V

Power Rating: 100 W

Motor

Model DJI 6010

Propeller

Model DJI 2170

General

Operating Temperature 14 to 104°F / -10 to 40°C

Diagonal Wheelbase 44.6" / 1133 mm

Dimensions Propellers, Frame Arms, and GPS Mount Unfolded: 65.7 x 59.8 x 29.9" / 1668 x 1518 x 759 mm

Frame Arms and GPS Mount Folded: 25.2 x 22.9 x 24.5" / 640 x 582 x 623 mm

Weight Six TB47S Batteries: 20 lb / 9.1 kg

 

Six TB48S Batteries: 21.1 lb / 9.6 kg

RONIN-MX

Built-In Functions 

Operation Modes

-Underslung Mode

-Upright Mode

-Briefcase Mode

-Aerial Mode

-Jib or Wirecam Mode

Built-in, independent IMU module

DJI Specialized Gimbal Drive Motors with Encoders

Bluetooth Module

USB Connection

2.4GHz Receiver

Temperature Sensor

DJI Advanced 32-Bit DSP Processor

D-Bus Receiver Supported

MECHANICAL & ELECTRICAL CHARACTERISTICS

Working Current Static current: 300mA (@16V)

Dynamic current: 600mA (@16V)

Locked motor current: Max 10A (@16V)

Operating Temperature 5° F ~ 120° F (-15° C ~ 50° C)

Weight Including handle bar: 6.11 lb (2.77 kg)

Including vibration absorber: 4.74 lb (2.15 kg)

Gimbal Dimensions Excluding handle bar : 

280 mm (W) x 370 mm (D)x 340 mm (H)

Including handle bar : 

560 mm (W) x 370 mm (D) x 440 mm (H)

PERIPHERAL

Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 120mm

Maximum height measured from top of camera base plate: 195mm

Maximum width: 160mm

Accessory Power Connections 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1

GCU Input Power 4S Ronin-M Battery

Connections 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0

PC Assistant Software Requirements Windows XP or above; Mac OS X 10.9 or above

Mobile Assistant Software Requirements iOS 7.1 or above; Android 4.3 or above

WORKING PERFORMANCE

Load Weight (Reference Value) 10 lb (4.5 kg)

Angular Vibration Range ± 0.02°

Maximum Controlled Rotation Speed Pan axis: 200°/s

Tilt axis: 100°/s

Roll axis: 30°/s

Mechanical Endpoint Range Pan axis control: 360°

Tilt axis control: +270° to -150° 

Roll axis control: ± 110°

Controlled Rotation Range Pan axis control: 360°

Tilt axis control: +45° to -135° 

 

Roll axis control: ± 25°