Pag 9001 Mini light / Standard Halogen / PP90 (500mm)

PAG 9001 Mini Paglight / Standard Halogen / PP90 (500mm)

Features:

• Miniature Paglight designed for use with smaller, digital 12V camcorders
• Soft, even spectral distribution
• Fully focusable from spot to flood
• Cool-running design
• Rugged yet lightweight impact resistant construction
• Includes a standard halogen lamp holder
• 10W, 20W and 35W (G4 size) bi-pin halogen long-life lamps are sold separately
• Suitable for use with 12V to 14.8V Li-Ion, Ni-MH or Ni-Cd batteries
• Patented interchangeable lamp unit design also accepts Softstart and HMI arc lamp units
• A Rotatable Accessory Kit that has a filter to convert halogen to daylight colour temperature is sold separately
• Hot-shoe Power Base with PP90 plug (lead length 500mm) for use with the light output on a PAGlok Connector
• Includes ¼€ Stud Adaptor and Shoe Plate
• Reflector 35mm dia.
• 45mm wide x 70mm long x 80mm high

The 12V Mini Paglight is a miniaturised version of the 12V Standard Paglight, that incorporates many of the same design concepts: the plug-in lamp holder feature, the hot-shoe power base and cool-running construction.

Paglight has a revolutionary patented design which allows a range of professional lighting technologies to be used with one lamp head. Interchangeable tungsten halogen or HMI arc lighting modules, plug into the back of the reflector housing. They can be hot-swapped quickly and safely, in a matter of seconds. Paglight is the only broadcast light with this feature, providing you with the correct lighting technology for any professional situation.

The Mini Paglight has an output that is soft and even. The lamp head incorporates a spot to flood feature for additional control, a feature not commonly found in camera top-lights.

The light is designed to be cool-running at all times and easy to handle.

The Mini Paglight is supplied with a detachable hot-shoe Power Base that enables you to quickly attach the light to the camera, and remove it after shooting, leaving the power connection in place. This model incorporates a Power Base that has a cable length of 500mm, terminated with a PP90 connector, suitable for the output on a PAGlok battery mount, when fitted to the rear of the camera.

The Mini Paglight can be mounted to the camera using the ¼€ stud adaptor or the camera shoe plate supplied with the light.

SPECIFICATION:

• Voltage: Nominal 12V to 14.8V battery supply.

• Maximum Power Rating: 35W lamp with 13.2V battery.

• Dimensions:

Height: 85mm (3.3”)
Width: 52mm (2”)
Depth: 75mm (3”)
Without accessory kit, plug-in lamp unit or power base.

Weight: 114g (4oz) without accessory kit, plug-in lamp unit or power base.

• Reflector size: 35mm (1.4”) dia.

Standard Halogen Lamp Holder:

• Lamps: Low voltage halogen capsules, long-life rating (4000 hours at 12V).

• Voltage: Nominal 12V.

• Watts: 10W, 20W or 35W.

• Colour Temperature: 3200°K at 12V (5600°K when using dichroic filter).

• Base: Type G4.

• Dimensions:

Height: 30mm (1.2”).
Width: 30mm (1.2”).
Depth: 87mm (3.4”).
With lamp protector.

Weight: 36g (1.3oz) with lamp and lamp protector.

Power Base:

• Connector: 2.1mm (PP90M) centre pin negative.

• Lead Length: 500mm (19.7”).