Sony UWP-D26/K33 UHF Wireless Set Consisting Of Bodypack, TX & RX

Sony UWP-D26/K33 (UWP-D26-K33, UWP_D26_K33, UWPD26K33, UWP D26 K33, uwp-d26/k33) UHF Wireless Set Consisting Of Bodypack, TX & RX

The demand for high quality audio is increasing as high resolution content becomes prevalent in the video production industry. Today’s content creators are faced with the challenge of capturing high-quality audio quickly, reliably and with limited resources. Offering superb sound quality with digital processing, reliable RF transmission, true double tuner diversity reception and friendly features, the UWP-D series is an ideal partner for ENG (electronic news gathering) and EFP (electronic field production), as well as documentaries and weddings. The UWP-D26 package includes the UTX-B40 bodypack transmitter, UTX-P40 XLR plug-on transmitter and URX-P40 receiver, plus accessories.

Digital Audio Processing for High Quality Sound

Advanced digital audio processing technology by Sony assures high quality sound with improved transient response performance. A new [optional] digital audio interface enables direct digital sound recording with many Sony professional camcorders and Alpha interchangeable lens cameras via the SMAD-P5 Multi Interface MI shoe adaptor, bypassing A/D and D/A conversion stages to further ensure excellent sound quality.

Seamless Camcorder Integration

Integration with compatible* Sony camcorders (requires SMAD-P5 Multi Interface shoe adaptor) displays audio information such as RF level meter, audio mute status and transmitter low battery alert in the camera’s viewfinder. Via the SMAD-P5, audio signals are transmitted from receiver to camera without requiring a cable connection. The wireless receiver can also receive power from the camera, with synchronised power on/off between camera and receiver for more effective power management.

Fast, Easy Frequency Setting Sony’s uniquely user-friendly NFC SYNC feature allows quick, intuitive secure channel setting between transmitter and receiver.

Light, Compact Design

Reduced system size and weight enable superior mobility in a wide range of applications including news, documentaries, weddings and remote production. The receiver’s compact size and light weight make it an ideal partner for use small camcorders and interchangeable lens digital cameras.

Transmitter (bodypack)

• Oscillator type: crystal controlled PLL synthesizer
• Carrier frequencies: 566.025 MHz to 630.000 MHz (UHF TV channels 33 to 40)
• Frequency range: 23 Hz to 18 kHz (typical)

Signal-to-noise ratio:

• -60 dBV (3.5 mm diameter 3-pin, lockable mini jack, analog output, 0 dB audio output level)
• -20 dBFS (external connection, digital output, 0 dB audio output level)
• -50 dBFS (external connection, analog output, 0 dB audio output level)

• distortion: 0.9% or less (1 kHz input, -60 dBV)
• Audio delay: approx. 0.35 ms
• RF output power: 30 mW / 5 mW selectable
• Sound input: 3.5 mm jack (lockable)

Reference audio input level:

• -60 dBV (MIC input, GAIN MODE: NORMAL, 0 dB attenuation)
• +4 dBu (LINE input)

• Audio attenuator adjustment range: 0 dB to 27 dB (3 dB steps)

Signal frequency of the audio signal:

• In UWP-D compander mode: 32.382 kHz
• In UWP compander mode: 32 kHz
• In compander mode WL800: 32.768 kHz

• Display: OLED

Electricity demand:

• DC 3.0 V (two AA alkaline batteries)
• DC 5.0 V (supply via USB Type-C connector)

• Battery life: approx. 8-10 hours depending on the model (measured when using two AA alkaline batteries at 25 ° C and AUTO OFF display mode)

General

• operating temperatur: 0 ° C to 50 ° C
• Dimensions: 63 x 73 x 19 mm (without antenna)
• Weight: 83 g (without batteries)

Transmitter (plug-on transmitter)

• Oscillator type: crystal controlled PLL synthesizer
• Carrier frequencies: 566.025 MHz to 630.000 MHz (UHF TV channels 33 to 40)
• Frequency range: 23 Hz to 18 kHz (typical)

Signal-to-noise ratio

• 60 dB (-60 dBV, 1 kHz input)
• 102 dB (GAIN MODE set to AUTO GAIN, max.)
• 96 dB (GAIN MODE set to NORMAL, max.)

• distortion: 0.9% or less (1 kHz input, -60 dBV)
• Audio delay: approx. 0.35 ms
• RF output power: 30 mW / 5 mW selectable
• Sound input: 3 pin XLR (female)
• Reference audio input level: -60 dBV (MIC input, GAIN MODE: NORMAL, 0 dB attenuation)
• Audio attenuator adjustment range: 0 dB to 48 dB (3 dB steps)

Signal frequency of the audio signal:

• in UWP-D Compander mode: 32.382 kHz
• in UWP Compander mode: 32 kHz
• in Compander mode WL800: 32.768 kHz

• Display: OLED

Electricity demand:

• DC 3.0 V (two AA alkaline batteries)
• DC 5.0 V (supply via USB Type-C connector)

Battery life:

• without phantom power: depending on the model approx. 7-10 hours (measured when using two AA alkaline batteries at 25 ° C and AUTO OFF display mode)
• with phantom power: depending on the model approx. 6-7 hours (measured when using two AA alkaline batteries at 25 ° C and display mode AUTO OFF)

General

• operating temperatur: 0 ° C to 50 ° C
• Dimensions: 38 x 98 x 38 mm (including audio connection)
• Weight: 139 g (without batteries)

Receiver

• Oscillator type: crystal controlled PLL synthesizer
• Type of reception: true diversity method
• Carrier frequencies: 566.025 MHz to 630.000 MHz (UHF TV channels 33 to 40)
• Frequency range: 23 Hz to 18 kHz (typical)
• Signal-to-noise ratio: 60 dB (1 kHz sine wave, 5 kHz modulation)
• Distortion (THD): 0.9% or less (1 kHz sine wave, 5 kHz modulation)

Audio delay:

• approx. 0.35 ms (analog output)
• approx. 0.24 ms (digital output)

• Audio output connector: 3.5 mm jack (lockable)

Audio output level:

• -60 dBV (3.5 mm diameter 3-pin, lockable mini jack, analog output, 0 dB audio output level)
• -20 dBFS (external connection, digital output, 0 dB audio output level)
• -50 dBFS (external connection, analog output, 0 dB audio output level)

• Setting range for analog audio output: -12 dB to +12 dB (3 dB steps)
• Headphone jack: 3.5 mm jack
• Headphone output level: Max. 10mW (16 ohms)

Signal frequency of the audio signal:

• in UWP-D Compander mode: 32.382 kHz
• in UWP Compander mode: 32 kHz
• in Compander mode WL800: 32.768 kHz

• Display: OLED

Electricity demand:

• DC 3.0 V (two AA alkaline batteries)
• DC 5.0 V (supply via USB Type-C connector)

• Battery life: approx. 6 hours (measured when using two AA alkaline batteries at 25 ° C and AUTO OFF display mode)

General

• operating temperatur: 0 ° C to 50 ° C
• Dimensions: 63 x 70 x 31 mm (without antenna)
• Weight: 131 g (without batteries)

In The Box:

• 1x URX-P40 Portable Receiver
• 1x UTX-B40 Belt Pack
• 1x UTX-P40 Plug On
• 1x Lavalier Microphone