Dedolight DLED4.1D Lighting Kit,Used

Dedolight DLED4.1D Lighting Kit,Used 

Good condition

3 months warranty

 Note:Requires purchase of power supply

Dedolight DLED4.1-D

Continues to forge ahead with the introduction of the Mobile DLED4.1-D LED Light Head (Daylight). Again using aspheric lens elements results in an amazing 1:20 flood to spot ratio with a beam angle of 60-4 degrees that delivers 27,000 lux in spot mode at 3.0' with no UV radiation emitted. A wide angle attachment increases coverage 85-54 degrees.

The 5600K daylight balance blends in seamlessly in outdoor situations and is ideal for location and ENG work, and as is characteristic of LED sources, generates negligible heat. The DLED4.1-D is powered by the 100 to 260 VAC DT4.0-1 or DT4.0-1-DMX which offers remote control of the light's 100-20% dimmable light intensity. A DC power supply is also available for battery power sources up 18V. A full line of accessories from scrims and filters to Dedolight Imager projection attachments is available.

 This Dedolight DT4 Power Supply (90-260 VAC) is a small, lightweight power source for the DLED4 tungsten and daylight balanced heads.

The self-seeking voltage unit can be used virtually anywhere there's electricity and provides stable power that's dimmable from 100 - 20%. The DT4 comes with an 8.2' mains cable.

• Allows worldwide use from 100 to 260 VAC 50/60 Hz cycle plus continuous dimming
• For Dedolight DLED4 tungsten and daylight heads

Key Features:

• For DLED4 Daylight and Tungsten Heads
• Multi-voltage
• 100 - 20% Dimming
• IP40 Rating

Dedolight DT4.1-BAT-XLR

This Dedolight DT4.1-BAT-XLR DC Ballast for DLED4.1 Bicolor Lamp Head is a dimmable ballast with a XLR connector that also provides continuous variable color temperature from 3,000 to 6,000K. Input is 10.2-18.0 VDC

Dedolight DLED4.1-D Specifications

Item Type: LED Focusing Flood Light

Cooling System: Passive

Beam Angle: 4° to 60°

Front Accessory Mount: 3"

Power Source: AC to DC Adapter

AC Input Power: 120–240 VAC, 50/60 Hz

DC Input Power: 18 VDC

Power Consumption: 45 W

Inline Switch: No

Power Pass-Thru: No

Yoke Type: Manually-Operated Yoke

Fixture Mounting: 5/8" Receiver via Yoke Mount

Display: No

Protection Class: III

Dimensions (Flood Mode): 6.4 x 4.3 x 3.9" / 16.2 x 11 x 10 cm

Dimensions (Spot Mode): 7.9 x 4.3 x 3.9" / 20 x 11 x 10 cm

Weight: 3 lb / 1.36 kg

Dedolight DT4.1 Power Supply Specifications

Input Voltage: 90–260 VAC

Output Voltage: 40 V

Dimming: Continuously adjustable from 100–20%

Safety: Protection Class I, IP40

Mains Cable Length: 8.2' / 2.5 m

Power Supply to Light Head Cable: 4.6' / 1.4 m

Mount: Cable Loop

Dimensions: 6.0 x 2.8 x 2.0" / 14.2 x 7.2 x 5.0 cm

Weight: 2.2 lb / 1.0 kg

Dedolight DT4.1-BAT-XLR Specifications

Input: 10.2–18.0 VDC

Connector: XLR

Dimming: 100–0%

Colour Temperature Range: Approx. 3000–6000K Continuous

Dimensions: 5.59 x 2.83 x 1.96" / 142 x 72 x 50 mm

Weight: 0.75 lb / 340 g

In the box:

• 2 x Dedolight DLED4.1-D Light Head
• 2 x Dedolight DT4.1 Power Supply
• 2 x Dedolight DT4.1-BAT-XLR Power Supply
•  Dedolight Bag