This site uses cookies to provide and improve your shopping experience. By continuing to use this site, you agree to accept these cookies. For more information, please see our Cookies PageCookies Page.
Continues to forge ahead with the introduction of the Mobile DLED4.1-D LED Light Head (Daylight). Again using aspheric lens elements results in an amazing 1:20 flood to spot ratio with a beam angle of 60-4 degrees that delivers 27,000 lux in spot mode at 3.0' with no UV radiation emitted. A wide angle attachment increases coverage 85-54 degrees.
The 5600K daylight balance blends in seamlessly in outdoor situations and is ideal for location and ENG work, and as is characteristic of LED sources, generates negligible heat. The DLED4.1-D is powered by the 100 to 260 VAC DT4.0-1 or DT4.0-1-DMX which offers remote control of the light's 100-20% dimmable light intensity. A DC power supply is also available for battery power sources up 18V. A full line of accessories from scrims and filters to Dedolight Imager projection attachments is available.
State-of-the-art LED light source with features exclusively developed by Dedolight
Dedolight patented aspherical optics
Daylight color balance is ideal for location work, guaranteeing maximum output and minimum time spent fumbling with filters
Provides astoundingly high efficiency in output
Unprecedented wider and tighter focusing range
Dedolight clean beam concept. Controlled precision beam with no stray light outside the fixture and perfectly even light distribution within the beam
This Dedolight DT4 Power Supply (90-260 VAC) is a small, lightweight power source for the DLED4 tungsten and daylight balanced heads.
The self-seeking voltage unit can be used virtually anywhere there's electricity and provides stable power that's dimmable from 100 - 20%. The DT4 comes with an 8.2' mains cable.
Allows worldwide use from 100 to 260 VAC 50/60 Hz cycle plus continuous dimming
For Dedolight DLED4 tungsten and daylight heads
Key Features:
For DLED4 Daylight and Tungsten Heads
Multi-voltage
100 - 20% Dimming
IP40 Rating
Dedolight DT4.1-BAT-XLR
This Dedolight DT4.1-BAT-XLR DC Ballast for DLED4.1 Bicolor Lamp Head is a dimmable ballast with a XLR connector that also provides continuous variable color temperature from 3,000 to 6,000K. Input is 10.2-18.0 VDC
Dedolight DLED4.1-D Specifications
Item Type
1x LED Focusing Flood LightBuilt-In Lights
Photometrics
Not Specified by Manufacturer
Front Accessory Mount
3"
Power Source
AC to DC Adapter (Not Included)
AC Input Power
120 to 240 VAC, 50 / 60 Hz
DC Input Power
18 VDC
Power Consumption
45 W
Fixture Mounting
1x 5/8" Receiver (Via Yoke Mount)
Light Fixture
Item Type
1x LED Focusing Flood LightBuilt-In Lights
Photometrics
Not Specified by Manufacturer
Cooling System
Passive
Beam Angle
4 to 60°
Front Accessory Mount
3"
Power & I/O
Power Source
AC to DC Adapter (Not Included)
AC Input Power
120 to 240 VAC, 50 / 60 Hz
DC Input Power
18 VDC
Inline Switch
No
Power Pass-Thru
No
Power Consumption
45 W
Mounting
Yoke Type
Manually-Operated Yoke
Fixture Mounting
1x 5/8" Receiver (Via Yoke Mount)
General
Display
No
Protection Class
III
Dimensions
6.4 x 4.3 x 3.9" / 16.2 x 11 x 10 cm (Fixture in Flood Mode) 7.9 x 4.3 x 3.9" / 20 x 11 x 10 cm (Fixture in Spot Mode)
Weight
3 lb / 1.36 kg
Dedolight DT4.1 Power Supply Specifications
Input Voltage
90 - 260 VAC
Output Voltage
40V
Dimming
Continuously 100 - 20%
Safety
Protection Class I, IP40
Cable
Mains cable (plug to power supply): 8.2' (2.5 m)
Power supply to light head cable: 4.6' (1.4 m)
Mount
Cable loop
Dimensions
6.0 x 2.8 x 2.0" (14.2 x 7.2 x 5.0 cm)
Weight
2.2 lb (1.0 kg)
Dedolight DT4.1-BAT-XLR Specifications
Input
10.2 to 18.0 VDC
Connector
XLR
Dimming
100-0%
Color Range
Continuous: approximately 3,000 to 6,000K
Dimensions
5.59 x 2.83 x 1.96" (142 x 72 x 50 mm)
Weight
0.75 lb (340g)
code:
In the box:
2 x Dedolight DLED4.1-D Light Head
2 x Dedolight DT4.1 Power Supply
2 x Dedolight DT4.1-BAT-XLR Power Supply
Portabrace Bag
Be the first to review DLED4.1D Lighting Kit,Used. Write a review ›