This site uses cookies to provide and improve your shopping experience. By continuing to use this site, you agree to accept these cookies. For more information, please see our Cookies PageCookies Page.
C-COM iNetVU C7024C Ver 1.4 Antenna Controller 7000, used
C-COM iNetVU C7024C Ver 1.4 Antenna Controller 7000 Technical specifica t ions SEVEN methods of finding satellite with the iNetVu® 7000/7024 controller • DVB Search - Searches directly for any DVB-S1 or DVB-S2 (ACM) carrier on the target satellite and peaks on it.
• DVB Search, Opposite Polarity – Searches for DVB-S1 or DVB-S2 carrier in the opposite polarity on target satellite, then rotatespolarization axes and enables transmitter if modem signal attained.
• DVB Search, Reference Satellite - Searches for a DVB-S1 or DVB-S2 carrier on ANY configured reference satellite then moves tothe target satellite and peaks on modem signal.
• RF Automatic Search – The system will stop and search for modem signal when it senses an increase in RF energy receivedthrough the DVB tuner as it passes by the target satellite. If the modem signal is found, the system will begin the peak process.
• RF Override Search – The user specifies an RF Threshold such that the system stops when it reaches an area above the thresholdand looks for modem signal to peak on.
• Beacon Receiver – The Controller works seamlessly with the optional iNetVu® Beacon Receiver by searching for a specifiedbeacon frequency and then peaks on it (search gain level can be adjusted).
• Auto-Deploy Method - Peaks on a reference satellite then uses precise pointing mechanism to locate the target satellite, evenwhen no modem RF or beacon signal is available to peak on.
The iNetVu® 7000/7024 Controller
• Can be operated from a PC application using the USB port • Via its web interface, it can be operated remotely or locally over a network connection • Can be completely configured from the front panel with a password protected configuration menu • Protects the platform and its components from damage, using current levels and sensor readings. It includes motion andmovement protection as well • Provides automatic re-peaking if signal degradation occurs • Works correctly even when deployed while on an incline (in any direction) of up to 15° • Can search for both DVB-S and DVB-S2/ACM carriers • Supports full automatic and manual control of the iNetVu® Platform • Allows the users to select from multiple speed levels for both azimuth and elevation • Allows the system to operate unattended in remote locations • Is able to upload the recorded log information (Maximum of 12 hours) from the controller to the PC for troubleshooting • Supports full tracking of Inclined Orbit satellites by both signal strength and timed function • Is capable of powering the LNB with 13-21 Volts, selectable in software • Provides the option of saving the settings to a configuration file that can be used to configure additional controllers with thesame configuration parameters • Works seamlessly with Uplogix Remote Management Appliances • Supports both GPS and GLONASS Satellite Navigation Systems • Supports Electronic Flux Gate Compass for increased speed of acquisition • Designed and manufactured to the highest standards of quality and reliability by C-COM • Supports all iNetVu® Mobile antenna platforms
The DVB-S2/ACM tuner is integrated into all iNetVu 7000 / 7024 Controllers.
It allows the iNetVu system to locate satellites with or without a satellite modem. This compact, high-performance tuner can be programmed to DVB-S or DVB-S2/ACM frequencies, allowing users to preconfigure specific satellite acquisition settings.
Optional Beacon Receiver – BR300L
An optional 19-inch rack-mountable iNetVu BR300L Beacon Receiver is available for integration with iNetVu controllers.
This compact external unit detects satellite beacon power density across the 930MHz–2300MHz frequency range.
The receiver connects to the controller via an RS232 serial interface.