Libec ALX-S12 43.5 Inch Slider with Case, 33lbs Payload

Libec ALX-S12 (ALX/S12, ALX_S12, ALX S12, alx-s12) 43.5 Inch Slider with Case, 33lbs Payload

The Libec ALX S12 is a 47" long camera slider that features two integrated 75mm ball bases with flat bottoms, allowing it to be supported by a pair of 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb. For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.

At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain. For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 47" rail for separately available 15.5" or 32.6" rail lengths.

Weight 2.5kg / 5.5lb *1

1* The weight is excluding tripod mount adapter and bowl clamp

Payload 15kg / 33.0lb *2

*2 When not attached to the tripod

Head attachment screw 3/8" screw

Screw holes on the rail’s back side 1/4" and 3/8" screw holes

Rail length 1200mm / 47"

Sliding range 1108mm / 43.5"

In the Box

• Libec ALX S12 43.5" Slider
• Dual-Base Tripod Mount Adapter
• Tripod Mount Fixing Handle
• Collapsible / Removable Tabletop Legs
• Padded Nylon Carrying Case
• Maintenance Kit