Marshall CVM-22 (CVM/22, CVM_22, CVM22, CVM 22, cvm-22) 1/4-20” Thread Pole/Tree Mount with Adjustable Strap
Adjustable 1/4-20" camera mount designed to attach to poles, trees, and trussing with articulated boom arm and adjustable nylon strap. Great for both indoor and outdoor use, the reinforced boom arm enables versatile camera positioning and placement in hard-to-reach places.
Compatibility: CV-RCP-V2 RCP
Compatibility: Marshall CV610-U3 or CV610-U3-V2 PTZ camera
GeneralAccessory Type: Cold shoe adapter Camera features: Compact size, Stand and MountsAccessoriesIntended For: Viewfinder Features: 1/4" thread
Accessory Type: Motor vibration absorber Intended For: Camera Mount Types: 1/4"-20 Pass-Through Holes Dimensions: 3 x 3 x 1" / 7.6 x 7.6 x 2.5 cm
Product Type: Camera mounting clip Placing / Mounting: On-the-monitor mountable, desktop Mount Type: 1/4"-20 Male
Length: 7" (17.7 cm)
Mount: 1/4"-20 Ball Dimensions: Fully Extended Height: 7" / 17.8 cm, Suction Cup Size: 2.5" / 6.4 cm (Each Cup) Weight: 0.25 lb / 0.11 kg
Mounting: Multiple M3-Size Screw Holes Dimensions: Approximately 7.6 x 3.9" / 191.8 x 100 mm Compatibility: CV620, CV612HT-4K, CV620-IP PTZ, CV730-BK/WH, and CV730-NDI/NDIW PTZ cameras
Compatibility: Marshall CV610-U3 or CV610-U3-V2 PTZ camera
Camera Mounting Screw: 1 x 1/4"-20 Screw Dimensions: Internal Box: 9.4 x 7.4 x 3.7" / 23.9 x 18.7 x 9.4 cm Compatibility: Marshall CV605, CV610, CV612, CV620, and CV630 PTZ cameras
CompatibilityMarshall CV612, CV620, and CV630 PTZ cameras
Mount Types:Top: 1/4"-20 Male Bottom: 1/4"-20 Male Length: 8.25" / 21 cm
Marshall CVM-6 (CVM/6, CVM_6, CVM 6, CVM6, cvm-6) Adhesive Camera Mount Kit Including Clip
The Adhesive Camera Mount Kit from Marshall Electronics is designed for Marshall miniature, compact, and lipstick cameras. Consisting of several components, it can be set up in four different combinations. Included are two adhesive base mounts of different sizes, two adjustable knuckle arms, a 1/4"-20 swivel ball mount, and a 19mm diameter lipstick camera clip. Setup begins with either of the base mounts, one of the arms on top of that, and then either the 1/4"-20 ball mount or the lipstick camera clip as the camera support on top.
