Teradek Cables Connectors & Adapters

Teradek TER-BIT706 ( BIT706, TERBIT706, TER BIT706, TER/BIT706) 2-Pin to 4-Pin Power - Approx 20cm

This is a 6-inch 2-pin lemo to 4-pin lemo power cable for the new CUBE encoders and decoders.

Features :

• 2-Pin to 4-Pin Power - Approx 20cm

Length: 15cm

Find Out More

Teradek TER-BIT056 ( TERBIT056, TER/BIT056, TER BIT056 , BIT056  )18 Watt AC Adapter 2M Cable to 2-Pin Power

Features:

• 18 Watt AC Adapter 2M Cable to 2-Pin Lemo

Teradek TER-BIT630 ( TERBIT630, TER/BIT630, BIT630 TER BIT630  ) BITS 630 Battery adapter plate for Sony M Series 7.2 volt batteries to 2-Pin Lemo

Features:

• Battery adapter plate for Sony M Series 7.2 volt batteries to 2-Pin Lemo

Teradek TER-BIT637 ( TERBIT637, TER/BIT637,  BIT637 , TER BIT637 ) BITS 637 Battery adapter plate for Sony B Series 14.4 volt batteries to 2-Pin Lemo

Features:

• Battery adapter plate for Sony B Series 14.4 volt batteries to 2-Pin Lemo

Length: 45.72 cm (18 inch)

Find Out More

Features: Power the RTMotion from a battery or plate Hirose to D-Tap (male) 60cm Length

Find Out More

Features : MK3.1 RED Module + ARRI ALEXA - For MK3.1 Receiver Power the RTMotion MK3.1 Receiver from the 12V port on the REDVOLT XL module, RED BACKPACK QUICKPLATE or ARRI Alexa Hirose to LM 0B - 60cm Length Compatible with; - ARRI Alexa - output is 12V, 2.2 A - RED BACKPACK QUICKPLATE -...

Find Out More

Teradek TRT-11-1372 ( 11-1372, TRT11-1372, TRT/1-1372, TRT 11-1372 ) MK3.1 Power Cable EPIC +1 and PRO-IO (60cm)

Features :

• MK3.1 Power Cable EPIC +1 and PRO-IO (60cm)
• Power the RTMotion from the EPIC +1 or PRO-IO Module
• Hirose Connector LM Connector 60cm Length RED PRO I/O MODULE output is 1.5 A RED 1 MODULE output is 2.0 A

Teradek TRT-11-1358 (TRT/11/1358, TRT_11_1358, TRT111358, 11-1358, trt-11-1358) MK3.1 Power Cable with Flying Leads (100cm)

MK3.1 Bare Leads Power For MK3.1 Receiver. Make your own power cable, to power RTMotion Receiver/Motors. Hirose Stripped End 100cm Length Voltage must be 9-17V.

Teradek TRT-11-1387 ( 11-1387, TRT/11-1387, TRT11-1387, TRT 11-1387 ) MK3.1 Power Cable MK-V (60cm)

Features :

• MK3.1 Power Cable MK-V (60cm)
• Power the RTMotion from an MK-V power out
• Hirose to LM 60cm Length Note: MK-V - 3-pin 12/24V

Teradek TRT-11-1350 ( 11-1350, TRT11-1350, TRT/11-1350, TRT 11-1350 ) MK3.1 Power Cable Extension (100cm)

Features :

• MK3.1 Power Cable Extension (100cm)
• Extend any RTMotion power cable
• Hirose (male) to Hirose (female) Extend by 100cm

Teradek TRT-11-1415 ( 11-1415, TRT11-1415, TRT/11-1415, TRT 11-1415 ) Teradek RT MK3.1 Power Cable XLR (60cm)

Features :

• Teradek RT MK3.1 Power Cable XLR (60cm)
• Power the RTMotion from a battery or plate
• Hirose to XLR 4-pin 60cm length

Teradek TRT-11-1367 ( 11-1367, TRT11-1367, TRT/11-1367, TRT 11-1367 )  MK3.1 Power AC/DC Kit (with International plugs)

Features :

• MK3.1 Power AC/DC Kit (with International plugs)
• Power the RTMotion from an economy consumer style 12V lithium ion battery pack, or from a wall socket

Teradek TRT-11-1373 ( 11-1373, TRT11-1373, TRT/11-1373, TRT 11-1373 ) MK3.1 Power Cable Intuitive Aerial (38.5cm)

Features :

• MK3.1 Power Cable Intuitive Aerial (38.5cm)
• Intuitive Aerial power cable, for use with Aerigon drone

Teradek TRT-11-1379 ( 11-1379, TRT11-1379, TRT/11-1379, TRT 11-1379 ) Latitude Power Cable 2pin (40cm, r/a to straight) 

Features :

• Latitude Power Cable 2pin (40cm, r/a to straight)
• Power the LATITUDE from 2pin LM.0B, EU type (Pin1=GND) as used by ARRI, RED, etc.
• Will power the LATITUDE from an ALEXA (12V) and RED (AUX 2-pin)
• Cable Length 40cm
• This cable has a right-angled LM connector and colour coded overmold allowing for an easy compact setup
• Cable is wired 1-1, 2-2... So it assumes that the power supply Pin #1 = GND

Teradek TRT-11-1377 ( 11-1377, TRT11-1377, TRT/11-1377, TRT 11-1377 ) Latitude Power Cable 2pin (Crossover) (40cm, r/a to straight)

Features :

• Latitude Power Cable 2pin (Crossover) (40cm, r/a to straight)
• Power the LATITUDE from 2pin LM.0B, US type (Pin2=GND)
• This cable is wired 1-2, 2-1, to allow the LATITUDE (Pin1=GND) to power off USA style 2pin LM power source (Pin2=GND)

Teradek TRT-11-1388 ( 11-1388, TRT11-1388, TRT 11-1388, TRT/11-1388 ) Latitude Motor Cable 20 cm.

Features :

• Latitude Motor Cable - 20cm
• Designed for Latitude MDR
• Spare Motor cable, 20cm. Note - this also works with the Receiver MK3.1, but the right angle points DOWN towards the CAM/PWR sockets.