SPECIFICATIONS:- Format DVCAM Recording Time 64 minutes of recording time in SP mode Magnetic Properties Intrinsic coercivity - 105kA/m Retentivity - 500mT Squareness - 0.78 Br/Bm Physical Properties Thickness: back coating - 0.5 µm Thickness: base - 6.3 µm Thickness: magnetic layer - 0.2 µm Thickness: total -...
Features: 77mm Variable Neutral Density Filter Provides 1.3 to 6 Stops of Light Control Rotating Ring to Choose Degree of ND Larger Front Filter Ring to Avoid Vignetting Specifications Thread diameter: 77mm (rear), 86mm (front) Weight: 82g Includes In The Box: 77mm 0.4-1.8 Variable Neutral Density Filter Protective Case Front Lens Cap
Model : RP-PD54S Info-Lithium Battery Pack Apply For : Panasonic AG-HMC,AC,AG series and all other Video Camcorders that use CGR-D style batteries Product Color : Dark Grey Bat. Cell Model : Samsung SDI AA High Quality 18650 x 5 Bat. Cell Chemistry : Lithium-Ion Output Voltage : 7.4V DC Capacity (mAh) : 5400 mAh Capacity...
Model : RP-JC70 Info-Lithium Battery Pack with 4-LED Power Monitor Apply For : JVC Camcorders GY-HMQ10, HM600, HM650, and GY-LS300 Product Color : Dark Grey Bat. Cell Model : Samsung AA High Quality 18650 x 6 Bat. Cell Chemistry : Lithium-Ion Output Voltage : 7.4V DC Capacity (mAh) : 7800 mAh Capacity (Wh) : 57.7...
Connectors: 1 x D-Tap Battery Plate Mount Type: V-Mount Dimensions: 5.6 x 3.6 x 0.8" / 14 x 9 x 2 cm Weight: 0.6 lb / 272 g
PAG 9304 PAGlink PL96T Time Battery
Model 9304 FEATURES:
The PL96T is a high-power, intelligent linking battery, and part of the PAGlink system.
PAGlink is the only system that allows you to combine the capacities of two to eight batteries in any state of charge, to achieve super-high capacities and a higher current-draw capability.
It is the only system that allows you to charge batteries whilst linked.
PAGlink batteries can be used individually or linked to power a variety of cameras including: high-definition broadcast cameras, digital cinema and 3D camera set-ups, HDSLRs and handheld camcorders.
An individual PAGlink battery has a capacity of 96 watt-hours, making it unrestricted, in quantity, for air transportation. Linking two batteries doubles the capacity to 192Wh; three batteries provide 288Wh. No other system offers as much power.
Hard-wearing, heavy duty contacts are incorporated for high-current applications. The rated maximum continuous output is 12A when linked (8A individually).
PAGlink is smarter. Other manufacturers use more expensive cell-technology to sustain a current draw of only 10A, while PAGlink achieves a superior 12A, using cheaper, standard Li-Ion technology.
As well as being smarter, PAGlink batteries are smaller and lighter, with a higher energy density than any linking system marketed to date.
Linked batteries form a high speed serial network that enables them to communicate with each other to control charge and discharge.
The rear battery can be hot-swapped for constant, uninterrupted camera power.
The battery features long-life, premier-quality Li-Ion cells, which have no memory effect, and are completely recyclable. In keeping with PAGs total battery design philosophy it is designed and constructed to provide the longest possible working life.
The PL96T Time Battery incorporates a numeric run-time and capacity display, unique to PAG. Remaining run-time is shown, on-load, expressed in hours and minutes, to a resolution of 1 minute. Remaining capacity is shown as a percentage (1% increments).
The display maintains its accuracy by tracking the performance, and adjusting calibration values to compensate for the ageing of the cells, and does not require a periodic Ã¢€˜serviceÃ¢€™ charge.
The PL96T can be linked to a PL96e battery to provide a numeric display of remaining run-time for all linked batteries.
PAGlink batteries support four different data systems that display capacity in the camera viewfinder: Sony, IDX, Red and Anton-Bauer, and adapt automatically when connected.
PAGlink batteries store data in their microprocessor, such as capacity, voltage, number of cycles and software version, which can be revealed using the PAGlink Battery Reader (Model 9647), to assist with the management of battery stocks.
The battery software can be updated using a PAGlink Battery Programmer, ensuring that you benefit from PAGs continually advancing technology.
PAGlink batteries can be charged while linked, using any reputable V-Mount Li-Ion charger.
The new, 2-position PL16 charger (Model 9707) will simultaneously charge up to 16 PAGlink batteries (8 on each position), from any state of charge.
PAGlink batteries display their individual status during charging. When using the PL16 charger, the PL96T numeric display can be inverted, for legibility, with a single button press, and reverts automatically after removal from the charger.
The PL96T has been independently tested and certified to comply with UN transport safety regulations. Its capacity is below 100 watt-hours and it is therefore suitable for air transport on passenger aircraft, in hand-luggage, without quantity restriction.
The batterys advanced electronic protection system is fail-safe and features Parylene coated circuits to protect against electrolyte.
Enhanced low temperature performance allows PAGlink batteries to operate at -20°C.
Specification: D-8161A Voltage:14.4V Capacity:190Wh Max Output Power:80W Max Output Current:5.5A Over Current Protection:10A Mount Type:Gold mount Operation Temperature:0 - 40 °C Net Weight:Approx 1.3kg Dimensions:168×98×70mm
Voltage 7.2V Capacity 32Wh Max output power 30W Max output current 4A Over current protection 6A Compatible battery SONY NP-QM71/71D/91/91D Applicable camera SONY HVR-A1E, DSR-PDX10 Net weight Approx 0.22kg Dimensions 56×38×60mm
Nominal Voltage 14.4V Capacity 115Wh Max Output Power 150W Max Output Current 12A Mount Type V-mount Operation temperature 0- 40°C Net Weight Approx 0.9kg Dimension 165x90x51mm
Construction Plastic and Metal Load Capacity 5 lbs 2.6 kg Vest Optional Arm Optional Head Assembly/Top Stage Gimbal with Camera Mount Quick Release None Docking Bracket Optional Display Stand Dovetail Plate N/A Gimbal Metal Gimbal Dynamic Spin N/A Post N/A Monitor None Battery None Battery Mount N/A Optional Accessories Vest and Arm Weight 12.8...
Width 2" Length 2.75" Max Clamp Diameter 1.25" Cord Length 40" Weight 0.25 lb. Material ABS Compatibility JVC GY-HM 150, GY-HMQ10 and GY-HM70U
Power input: AC 100V-240V 50/60Hz Charging output: DC 8.4V, 2A×2 Adapting output: DC 8.4V, 3.5A Applicable battery: S-8BG6, Panasonic VW-VBG6 Dimension: 136×110×47mm Weight: 0.36kg
Canon CB920 (CB 920 CB-920) Car Battery Charger compatible with XM2
Car battery charger CB920, powers the XM2 camcorder or charges the battery via the 12v cigarette lighter.
Ideal for when you're out in the field, the CB-920 connects to a car's cigarette lighter socket and can be used to power all Canon batteries and camcorders, as well as charge the battery.
Voltage 7.2V Capacity 21Wh Max output power 30W Max output current 4A Over current protection 6A Compatible battery Panasonic CGA series D54S/D28S Applicable camera Panasonic DVX-100, HVX200/201 Net weight Approx 0.18kg Dimensions 60×36×55mm
Model: RP-BPF970 Chemistry: Lithium-Ion Output Voltage: 7.4V Capacity: 6600mAh Dimensions (WxHxD): 2-1/4 x 2-7/8 x 1-1/2" (5.7 x 7.3 x 3.8cm) Weight: 12.3 oz (350g) Check out our Blog for more info about Redpro Proffesional Products - click here.
Memory Capacity: 32GBSD Specification: SDHCUp to speed: Read (MB/s): 90 / Write (MB/s): 45Speed class: 10UHS Speed Class: 3Flash Memory: MLCStill Images (4:3) - RAW 4,608 x 3,456 pixels (16M): 64GB: 3,230 / 32GB: 1,630/ 16GB: 810Still Images (4:3) - High/L 4,320 x 3,240 pixels (14M): 64GB: 14,120 / 32GB: 7,280 / 16GB: 3,630Still Images...
Form factor: SDHC (16GB and 32GB), SDXC (64GB and 128GB) Available capacities: 8GB, 16GB, 32GB, 64GB, 128GB Performance/speed: Up to 45/30MB/s read/write speeds Card dimension: 0.94" x 1.25" x 0.08" (24 mm x 32 mm x 2.1 mm) Operating temperature: -13ºF to 185ºF (-25ºC to 85 ºC) Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Compatibility: For SDHC (8-32GB) cards: Compatible with...