Teradek Photo

Features: Compatible with Canon BP-970G Battery. Can Power the new CUBE Encoders and Decoders.

Find Out More

Features: Compatible with Panasonic CGA-D54 Battery. Can Power the new CUBE Encoders and Decoders.  

Find Out More

Features: Compatible with Sony L Series Batteries. Can Power the new CUBE Encoders and Decoders.  

Find Out More

Features : Battery for Panasonic D54 - Barrel Adapter to 2-Pin Power - Approx 25cm

Find Out More

Features : Replacement Battery for Panasonic VW-VBG6 - Barrel Adapter to 2-Pin Power - Approx 25cm

Find Out More

 Features : Replacement Battery for Sony NP-F970/F770 - Barrel Adapter to 2-Pin Power - Approx 25cm  

Find Out More

Teradek TER-BIT649 ( BIT649, TERBIT649, TER/BIT649, TER BIT649 ) Battery for Sony PMW-EX1, EX3 & 2-Pin Power to Power Tap Cable

Features :

• Battery for Sony PMW-EX1, EX3 & 2-Pin Power to Power Tap Cable

Teradek TER-BIT706 ( BIT706, TERBIT706, TER BIT706, TER/BIT706) 2-Pin to 4-Pin Power - Approx 20cm

This is a 6-inch 2-pin lemo to 4-pin lemo power cable for the new CUBE encoders and decoders.

Features :

• 2-Pin to 4-Pin Power - Approx 20cm

Teradek TER-TRAX-1105 ( TRAX-1105, TER/TRAX-1105,TERTRAX-1105, TER TRAX-1105 ) H.264 HD-SDI Encoder Card for T-Rax

Features:

• H.264 HD-SDI Encoder Card
• T-Rax supports multiple configurations
• Use either 8 encoder cards for multi bit rate streaming or a combination of encoders, decoders, and Sputnik for master control
• T-Rax is the easiest way to scale an IP video workflow

Teradek TER-TRAX-1110 ( TERTRAX-1110, TERTRAX-1110 , TER TRAX-1110, TER/TRAX-1110 ) Power Supply Unit 460w 1U for T-Rax

Features:

• Power Supply Unit 460w 1U for T-Rax

Teradek TER-BIT767 ( TERBIT767, TER BIT767, TER/BIT767, BIT767) Single Anton Bauer Mount Battery Plate for Bolt Receiver

Features:

• Single Anton Bauer Mount Battery Plate for Bolt Receiver

Teradek TER-BIT766 ( TERBIT766, TER BIT766, TER/BIT766, BIT766 ) Single V Mount Battery Plate for Bolt Receiver

Features :

• Single V Mount Battery Plate for Bolt Receiver

Teradek TER-BIT765 ( TERBIT765, TER BIT765, TER/BIT765, BIT765 ) Single Gold Mount Battery Plate 14.4V - TX

Features:

• Single V Mount Battery Plate Mount 14.4V - TX
• Includes 1 D-tap accessory output (50W - 14.4 Volt max) to power your Teradek Bolt Transmitter with the included Power Tap to 2pin Connector

Teradek TER-BIT763 ( TERBIT763, TER BIT763, TER/BIT763, BIT763 ) Dual Anton Bauer Mount Battery Plate for Bolt Receiver

Features:

• Dual Anton Bauer Mount Battery Plate for Bolt Receiver

Teradek TER-BIT761 ( TERBIT761, TER BIT761, TER/BIT761, BIT761) Dual Anton Bauer Mount Battery Plate for Bolt Transmitter

Features:

• Securely fasten your Bolt Receivers between Battery Plates
• Allows for seamless power solution for Monitor and Bolt Receiver combinations
• Power pass-through plates
• Three 1/4 20" Mounting points
• Two 1/4 20" Pass-through slots
• D-Tap Output to power Teradek Bolt Receiver

Teradek TER-BIT056 ( TERBIT056, TER/BIT056, TER BIT056 , BIT056  )18 Watt AC Adapter 2M Cable to 2-Pin Power

Features:

• 18 Watt AC Adapter 2M Cable to 2-Pin Lemo

Teradek TER-BIT630 ( TERBIT630, TER/BIT630, BIT630 TER BIT630  ) BITS 630 Battery adapter plate for Sony M Series 7.2 volt batteries to 2-Pin Lemo

Features:

• Battery adapter plate for Sony M Series 7.2 volt batteries to 2-Pin Lemo

Teradek TER-BIT637 ( TERBIT637, TER/BIT637,  BIT637 , TER BIT637 ) BITS 637 Battery adapter plate for Sony B Series 14.4 volt batteries to 2-Pin Lemo

Features:

• Battery adapter plate for Sony B Series 14.4 volt batteries to 2-Pin Lemo

Teradek TER-BIT641 ( BIT641, TERBIT641, TER/BIT641, TER BIT641 ) Battery for Canon BP-945/970 & 10" Barrel Adapter to 2-Pin Power

Features:

•  Battery for Canon BP-945/970 & 10" Barrel Adapter to 2-Pin Lemo

Teradek TER-NIBL500 ( TERNIBL500, TER/NIBL500, TER NIBL500 ,NIBL500 ) Battery adapter plate for Canon LP-E6 7.2V to Barrel Connector

Features:

• Battery adapter plate for Canon LP-E6 batteries to Barrel Connector

Specification: Compatibility: Canon BP-945/970 10" Barrel Adapter to Barrel Adapter Cable Size: 18" (45.7cm)

Find Out More

Features: 10" barrel to barrel adapter Replacement battery for Panasonic CGA-D54

Find Out More

Features: 10" barrel to barrel adapter Replacement battery for Panasonic VB-G6

Find Out More

Features: Battery Adapter Plate for Canon LP-E6 Connect LP-E6 7.2V battery to a 2-pin Lemo

Find Out More