Call: +44(0) 208 397 1407
Email: sales@digibroadcast.com
Rated 4.75 / 5 trustedshops.co.uk
Sell Your Gear Find Out More ›
Covid-19 Update

Zhiyun-Tech Photo

13 Items
View
Refine Selection
Filters
View 13 products ›
  • Select Price
      -
13 Items
View
  • Reference: ZHI-C000525E

    Charging Voltage: 5V Built in Li-ion Battery Capacity: 300mAh Weight: 0.176 kg (0.38 lbs) Gear: 0.8 Mod, 24 Teeth Compatible Stabiliser: Crane 2 Charging Current: 1500mA Charging Time: 0.5h Dimensions: 8.5 x 4.6 x 3.5 cm (3.3 x 1.8 x 13.7 inches)

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
  • Reference: ZHI-C020012E_C000525E

    Charge Time: Standard: 2.5 hours Dimensions: (WxDxH): 210 x 118 x 450mm Pan Angle Range: 360° Payload: 3.2kg Roll Angle Range: 360° Run Time: Max: 18 hours Tilt Angle Range: 320° Weight: 1.25kg

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
    £370.65 RRP: £433.00
  • Reference: ZHI-C000023E

    Compatibility: Crane 3 LAB Gimbal

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
    £312.00 RRP: £313.00
  • Reference: ZHI-C020013E

    Charge Time: 4 hours Dimensions: (WxDxH): 205x366x331mm Pan Angle Range: 360° Payload: 4.5Kg Roll Angle Range: 360° Run Time: 7.5 hours Tilt Angle Range: 273° Weight: 1880g

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
  • Reference: ZHI-C000024E

    Charge Time: 4 hours Pan Angle Range: 360° Payload: 4.5Kg Roll Angle Range: 360° Run Time: 7.5 hours Tilt Angle Range: 273°

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
    £955.00 RRP: £956.00
  • Reference: ZHI-C000021E

    Zhiyun-Tech ZHI-C000021E (ZHI/C000021E, ZHI C000021E, ZHI_C000021E, C000021E, zhi-c000021e) Master Accessories Kit for the CRANE 3 LAB

    This Zhiyun-Tech Crane 3 Lab Master Accessories Kit has everything you need to get started with your Zhiyun Crane 3 Lab gimbal. It consists of a smartphone holder, a focus and zoom combo kit, a telescoping monopod, a large multifunctional camera belt, a quick setup kit, a quick release baseplate, and a backpack.

    The articulating smartphone holder secures phones up to 6.3" wide to the Crane 3 Lab, and it folds up when not in use. The quick setup kit consists of two adapters that allow you to put together and break down your gimbal quickly, rather than screwing the joints together. The telescoping monopod works with the camera belt's quick release socket, has a removable tripod base, and can extend to 25.5" long.

    The large camera belt allows you to conveniently mount various accessories to keep your hands free and offers additional support for your Crane 3 Lab. The quick release baseplate can attach to the camera belt to allow for quick camera changes to and from the Crane 3 Lab. Finally, the focus and zoom combo kit allows you to control your camera's focus and zoom from your smartphone while mounted on the Crane 3 Lab. The included backpack carries your gimbal, camera, and all the accessories.

    Item Available   |   Usually dispatched within 24 hours
    £415.00 RRP: £416.00
  • Reference: ZHI-C000022E

    Charge Time: 4 hours Pan Angle Range: 360° Payload: 4.5Kg Roll Angle Range: 360° Run Time: 7.5 hours Tilt Angle Range: 273°

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
    £884.25 RRP: £1,033.00
  • Reference: ZHI-C020016EUR

    Charge Time: Standard: 2 hours Pan Angle Range: 360° Payload: 720g Roll Angle Range: 324° Run Time: Max: 7 hours Tilt Angle Range: 310° Weight: 500g (not including tripod)

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
    £184.90 RRP: £216.00
  • Reference: ZHI-C030016E1

    Charge Time: 3.5 hours Dimensions: (WxDxH) 123x105x328mm Pan Angle Range: 300° Payload: 0.21kg Roll Angle Range: 240° Run Time: Max: 12 hours Tilt Angle Range: 240° Weight: 0.547kg

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
  • Reference: ZHI-C030016E

    Charge Time: 3.5 hours Dimensions: (WxDxH) 123x105x328mm Pan Angle Range: 300° Payload: 0.21kg Roll Angle Range: 240° Run Time: Max: 12 hours Tilt Angle Range: 240° Weight: 0.547kg

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
  • Reference: ZHI-C000020E

    Zhiyun-Tech ZHI-C000020E (ZHI/C000020E, ZHI C000020E, ZHI_C000020E, C000020E, zhi-c000020e) Focus & Zoom Servo Combo Kit for Crane 3-Lab

    The Crane 3-Lab gimbal supports up to two motors at the same time. The Zhiyun-Tech TransMount Focus & Zoom Servo Combo Kit includes the TransMount Max zoom/focus servo and slightly lighter TransMount Lite focus servo. Together these two motors allow you to control both focus and zoom with zero latency. The motors attach to the bottom of the Crane's baseplate without any tools using just the included brackets, rods, and thumbscrews.

    Zhiyun-Tech TransMount Max Servo Zoom/Focus Controller for Crane 3-Lab & WEEBILL LAB

    The Zhiyun-Tech TransMount Max Servo Zoom/Focus Controller can be used interchangeably for zoom and focus control on the Crane 3-Lab and WEEBILL LAB gimbals. It has a powerful-enough motor to control zoom, whereas the lighter-weight TransMount Lite is designed for focus control only.

    The Crane 3-Lab supports up to two motors at the same time, and it's recommended to use the TransMount Max and TransMount Lite together if requiring both zoom and focus control on the Crane. The WEEBILL, however, supports only one motor, so the TransMount Max is recommended as the only solution because it can be used interchangeably for both functions.

    Featuring a toolless design, the TransMount Max attaches on the gimbal using just the included thumbscrews. It can be controlled via the gimbal handwheel or the companion smartphone app. Secure it to the supplied support bracket and mounting rod using two thumbscrews, and attach this assembly to the bottom of the gimbal's baseplate with the third thumbscrew. Then connect the servo to the gimbal with the provided USB cable, and connect the camera to the gimbal with one of the camera control cables the gimbal comes with. The USB cable connection provides zero-latency signal transmission.

    Zhiyun-Tech TransMount Lite Servo Focus Controller for Crane 3-Lab & WEEBILL LAB

    The Zhiyun-Tech TransMount Lite Servo Focus Controller is designed specifically for focus control. For zoom control please see the TransMount Max, which has a stronger motor that's capable of handling zoom adjustments.

    The TransMount Lite is intended for use with the Crane 3-Lab, although it's also compatible with the WEEBILL LAB. The Crane supports two motors at the same time; ideally, you would use the slightly lighter TransMount Lite for focus control and the optional TransMount Max for zoom control. The WEEBILL LAB, however, supports only one motor, so the better option for it would be the TransMount Max, because it can be used interchangeably between focus and zoom control.

    Featuring a toolless design, the TransMount Lite attaches on the gimbal using just the included thumbscrews. It can be controlled via the gimbal handwheel or the companion smartphone app. Secure it to the supplied support bracket and mounting rod using two thumbscrews, and attach this assembly to the bottom of the gimbal's baseplate with the third thumbscrew. Then connect the servo to the gimbal with the provided USB cable, and connect the camera to the gimbal with one of the camera control cables the gimbal comes with. The USB cable connection provides zero-latency signal transmission.

    Item Available   |   Usually dispatched within 24 hours
  • Reference: ZHI-C000527E

    Interface: USB Type-C Dimensions: 4.8 x 5.4 x 2.6" / 12.2 x 13.6 x 6.5 cm Weight: 11.6 oz / 330 g

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
  • Reference: ZHI-C000528E

    Interface: USB Type-C Dimensions: 4.8 x 5.4 x 2.6" / 12.2 x 13.6 x 6.5 cm Weight: 11.6 oz / 330 g

    Find Out More

    Item Available   |   Usually dispatched within 24 hours
Top