Teradek TER-BIT118 ( TERBIT118, TER/BIT118, TER-BIT118, BIT118 ) 2-Pin Lemo to PowerTap - Approx 45cm
Features : WHAT’S NEW? Dual HDMI/HD-SDI Input 802.11ac Wi-Fi 10/100/1000 Gigabit Ethernet Bidirectional IFB 3D LUT & CDL Color Management ShareLink™ IFB: Allows the studio to communicate with remote camera crews TECHNOLOGY GUIDES Streaming Terminology In The Box 1 x 2-pin Connector to 18W AC Power Adapter 1 x Ethernet Cable 1 x SDI 10...
Teradek TER-BIT848 (TER/BIT848, TER_BIT848, TERBIT848, BIT-848, ter-bit848) L Bracket Battery Adapter Plates
L Bracket Battery Adapter Plates (Battery to 5.5mm x 2.1mm DC Barrel Connector).
Power your Ace 500 transmitter or receiver using this dual mount battery plate. The plate attaches to the bottom of the transmitter or receiver using two 4-40 screws.
The Sony L-series/Canon LP-E6 Bidirectional Battery Plate is compatible with BOTH Sony L-Series Batteries and Canon LP-E6 batteries.
Teradek TER-10-2200 (TER/10/2200, TER_10_2200, TER102200, 10-2200, ter-10-2200) Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft
Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.
Small form factor and lighter weight enable greater freedom of movement
Improved feature set from previous Bolt generations at the same introductory price
ZERO-DELAY 4K WIRELESS VIDEO
Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).
Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)
Output: 1x 3G-SDI (up to 1080p60)
Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)
Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.
IMPROVED WIRELESS PERFORMANCE
Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.
SEND SIGNAL UP TO 6 RECEIVERS
Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.
LIGHTWEIGHT BODY WITH VERSATILE MOUNTING
TX Mounting: M3 / ¼”-20
RX Mounting: M3 / ¼”-20 / ⅜”x16
UNIVERSAL CROSS-COMPATIBILITY BETWEEN ALL BOLT 4K DEVICES
Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.
Transmit metadata, timecode, and start/stop flags from most camera manufacturers.
BOLT APP FOR ANDROID AND APPLE IOS
Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.
VIDEO Video Input: 1x HDMI Type A receptacle Video Output: 1x HDMI Type A receptacle Supported Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 720p 50/59.94/60 Video Compression: H.264 (AVC), Main profile Supported Video Bitrate: 250 kbps to 15 Mbps Preset Bitrates/Resolutions Max: 12 Mbps + 256 kbps audio 1920x1080 HD+: 8 Mbps + 256 kbps audio 1920x1080 HD: 5...
Features: Compatible with Canon BP-970G Battery. Can Power the new CUBE Encoders and Decoders.
Features: Compatible with Panasonic CGA-D54 Battery. Can Power the new CUBE Encoders and Decoders.
Features : Battery for Panasonic D54 - Barrel Adapter to 2-Pin Power - Approx 25cm
Features : Replacement Battery for Sony NP-F970/F770 - Barrel Adapter to 2-Pin Power - Approx 25cm
Teradek TER-BIT649 ( BIT649, TERBIT649, TER/BIT649, TER BIT649 ) Battery for Sony PMW-EX1, EX3 & 2-Pin Power to Power Tap Cable
Teradek TER-BIT706 ( BIT706, TERBIT706, TER BIT706, TER/BIT706) 2-Pin to 4-Pin Power - Approx 20cm
This is a 6-inch 2-pin lemo to 4-pin lemo power cable for the new CUBE encoders and decoders.
Features : Creates MPEG-TS over IP (TCP or UDP) Compatible with all Cube™ Encoders Includes the UDP Multicast Software license (free of charge)
Teradek TER-BIT026 ( TERBIT026, TER BIT026, TER/BIT026, BIT026 ) Antenna Array for Beam, Bolt 600, 1000, 2000 and 3000 receivers
Teradek TER-BOLT-915 ( BOLT-915, TERBOLT-915, TER/BOLT-915, TER BOLT-915 ) Lightweight HD-SDI Receiver
In The Box
If you are looking for all kinds of wireless video systems, then Teradek is the brand for you and we have a huge selection of their products for you to browse and buy right here at DigiBroadcast. Explore all the products below or read on to find out more about this leading broadcast brand.
American brand Teradek are leaders in the world of wireless video devices, creating a huge range of products for remote video capture, colour correction, webcasting, camera control and real-time monitoring. Designed and built in theUSA, Teradek wireless video systems are some of the most reliable pieces available within their industry and this has led the brand to gain a great reputation from professionals and amateurs alike.
As we’ve mentioned, here at DigiBroadcast we have a wide variety of products by Teradek for you to choose from. These include Teradek audio equipment, batteries and power, digital converters and even Teradek software. Plus, you can enjoy all of our Teradek items anywhere in the world as we have worldwide shipping available to our customers!
Once you’ve found the Teradek products you need, why not head over to our used equipment range and grab a bargain on all kinds of ex-demo and ex-display broadcast equipment.