Suitable for lightweight handheld camcorders & DSLR's * Supports up to 3kg. * Quick & simple use * Compact & lightweight * Fits to any sturdy tripod The Hague K2 Junior Jib fastens to the camera screw of any sturdy tripod or onto the 3/8 stud of a professional tripod. Your camcorder attaches directly to...
* Suitable for lightweight handheld camcorders & DSLR's * Supports up to 3kg. * Quick & simple use * Compact & lightweight * Includes its own stand The Hague K2WS Junior Jib fastens directly onto the sturdy stand. It has an adjustable telescopic column with a minimum height of 110cm and a maximum height of...
Length from stand/tripod to camera - 336cm at its longest length, 225cm at its shortest length. Length from stand/tripod to weight bar - 108cm. Total length - 444cm at its longest length, 332cm at its shorter length. Vertical crane movement - from ground level to 515cm high (at its longest length) or 345cm (at its...
* Suitable for lightweight handheld camcorders & DSLR's * Supports up to 2.7kg. * Includes a remote control power head * Mounts directly to it's own stand * Create smooth jib shots The Hague CamCrane K10 is quick and simple to set up, it is supplied with its own Stand and a Remote Pan &...
* Choice of three jib lengths * Supports up to 14kg. * Quick & simple use * Radial ball bearings ensure smooth movement * Professional camera jib The Hague K12 Multi-Jib fastens to any pro-tripod with a 100 or 75mm. bowl or a Hague dolly. It is quick and simple to set up and can...
The Hague D2 Pro Dolly. The telescopic column fastens to the dolly with a single handwheel, making it quick and simple to set up. The large 100mm individually braked swivel wheels enable the dolly to be moved with ease.
The Hague Dolly D3 has been designed for use with the Hague range of jibs K12, K14 & K16DV. The three leg frame fastens to the dolly with a handwheels, making it quick and simple to set up.
The Hague D4 Tripod Dolly is a sturdy dolly suitable for Manfrotto and Libec tripods. The large 100mm. diameter individually braked swivel wheels enables the dolly to be moved with ease.
Size:- L770mm.xW620mm.xH70mm. Weight:- 3kg. Transit size:- 770mm.x180mm.x180mm. Kit price includes: Tracking Dolly, 3 straps, 6 Track Connectors & 12 metres of Track. (8 x1.5m = 6 metre run)
* Suitable for most makes of tripod * Swivel wheels with individual breaks * Quick & simple use * Compact & lightweight * Suitable for tripods with ground spreaders or feet smaller than 40mm in diameter. Hague D6 Universal Tripod Dolly. This sturdy dolly is suitable for all makes of tripod with base spreaders or...
Included : 6 x 2 metre lengths of track with connectors which provides a 6 metre run. Extra track and connectors are available if required. Column height 110cm max. 72cm min. Dolly size 98cm x 68cm x 9cm. Weight 16kg.
* Suitable for camcorders & DSLR cameras * Supports up to 3kg. * Quick release camera plate * Support from the shoulder to the waste for maximum stability * Fully adjustable The Hague PS Pro Steadymount is an alternative support to a tripod when steady shots are required. It may not always be convenient to...
* Suitable for camcorders & DSLR's * Supports up to 10kg. * Fully adjustable * Quick release camera plate * There suction pads for extra stability Ideal for mounting a camcorder onto a vehicle - Fully adjustable - Can be mounted either horizontally or vertically - Three suction pads for extra stability -...
* Suitable for handheld camcorders & DSLR's * Supports up to 3kg. * Quick & simple use * As used on Top Gear * Two suction pads for extra stability
* Suitable for camcorders & DSLR's * Supports up to 6kg. * Fully adjustable * Ideal for car photography * There suction pads for extra stability The Hague SM8 camera suction mount for cars can be used in a variety of ways to mount a camcorder or stills camera almost anywhere onto a vehicle. It...
* Suitable for professional car photography * Supports up to 2kg. * Telescopic bar * Ideal for car photography * Achieve distance from the vehicle The Hague SM11 Telescopic Camera Suction Mount for cars allows a stills camera to be mounted away from the vehicle to create some very unusual shots. At it's longest...
Power Source 4 AA Batteries Vertical Tilt + - 15 Degrees Horizontal Pan 340 Degrees Approx. Max. Speed- Vertical Tilt 2.4 Degrees per sec. Approx. Min. Speed- Vertical Tilt 1.2 Degrees per sec. Approx. Max. Speed- Horizontal Pan 8 Degrees per sec. Approx. Min. Speed- Horizontal Pan 4 Degrees per sec. Auto Pan Settings 45,...
* Variable Speed * Supports up to 2.5kg. * Battery operated * Smooth camera movement * Includes 20ft (6m) extension cable he Hague UPH electronic motorized Underslung Pan & Tilt Power Head is suitable for all handheld camcorders that weigh less than 2.5kg. Ideal for Canon XM1/2, Sony VX2100/PD170, PDX10, JVC GY-DV300 Streamcorder, Panasonic AG-DVX100,DVC30...
* Suitable for camcorders & DSLR cameras * Supports up to 5kg. * Joystick control with variable speed * Battery or mains operated * Create smooth shots The Hague Pro Remote Pan & Tilt Power Head can be mounted to a Tripod, Jib, Crane or Wall bracket. It can be mounted vertically or underslung and...
The Superclamp & Variable Friction/Magic Arm can be attached to any pole, tube, bench or table. Its jaws will attach to anything between 12 to 55mm in width. It can be fixed either vertically or horizontally. The Magic Arm with reversible camera plate extends to 53cm.and can be set at any angle or direction. One...
Hague K18-PH200 (K18PH200, K18 PH200, K18/PH200, k18-ph200) CamCrane Camera Jib With Pro Pan & Tilt Powerhead
The Hague CamCrane K18 with the joystick controlled PH200 Pro Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 4kg (8.8lbs) in weight.
Once balanced the camera can smoothly move from ground level to almost 7 metres high and the crane will pan 360 degrees. You have the choice of using the CamCrane at it’s full length or without two of the centre sections. At it's full length support cables are used to improve rigidity. The counterbalance arm has an adjustable fine trim weight and a weight bar with handgrips. Standard bar weights are used for counterbalance (not supplied). A supplied monitor bracket enables the PH200 control box and a LCD monitor to be fastened to the crane, making it easier to monitor your shots.
The PH200 Pro Pan & Tilt Power Head will pan and tilt through 360 degrees, this enables the camera to point directly upwards or downwards when required. It is driven by two custom-geared motors with belt drive. The power head’s drive pulleys have sealed radial ball bearings for effortless smooth movement with minimum backlash. The motor drive can be easily disengaged to enable the camera to be balanced correctly on the camera plate. The head’s camera plate is adjustable for different sizes of camera and will support up to 4kg (8.8lbs). The speed of movement is variable, from the slowest crawl up to 52 degrees per second. The drive motors are quiet at low speeds, but will be heard at higher speeds if the camera's onboard microphone is used. (Similar to most power heads on the market). The head and controller are supplied in their own transit case.
The Joystick Control gives the head precision pan and tilt movement in either direction, from a slow crawl up to the required speed. The Joystick will also pan and tilt simultaneously. On the side of the control box is a variable speed controller, so you can set the maximum speed for better control, there are also switches to change the direction of the joystick control and an on & off switch. On the front of the control box are sockets for the control cable, 12vDC in, plus a composite video out phono socket, this enables a monitor to be added to monitor your shots. Led lights indicate when the unit is switched on and when the internal battery is on charge. The head is powered by a rechargeable internal battery which will last approximately 3 hours, or can be powered from the supplied mains adaptor. On the base of the control box is a ¼” threaded hole to allow it to be mounted to the crane. A 5 metre cable is supplied to connect the control box to the head. This cable can also carry a composite signal from the head to the controller, allowing a monitor to be used without the need of additional wires.
The K18 CamCrane is made of aluminium and breaks down into 5 main sections, making it easier to handle in transit. It is supplied in a cardboard carton but an optional transit case is also available.
K18 CamCrane - Specifications
Length from stand/tripod to camera 427cm at its longest length, or 210cm at its shortest length. Length from stand/tripod to weight bar 143cm. Total length: 570cm or 350cm at its shortest length. Vertical crane movement from ground level to 695cm high (at its longest length) or 226cm (at its shortest length). The maximum vertical crane movement includes going down as well as up, so the crane would need to be on a raised area to achieve the full movement. Colour – Black. Transit Size: 120 x 18 x 16 cm. Weight: 17kg (37.5lbs).
PH200 Remote Pan & Tilt Power Head - Specifications
Weight – 2.4kg. Dimensions – L240 x W120 x H450mm. Head sockets – 1 x 6 pin control socket. 1 x RCA phono socket (video in). Head construction – Black powder coated CNC machined aluminium. Drive - 2 Custom-geared motors with belt driven drive pulleys. Maximum Camera Weight - 4kg. Approximate maximum sized camera L450 x W180 x H280mm.
PH200 Joystick Control Box- Specifications
Weight – 1kg. Dimensions – L140 x W100 x H75mm. Control box sockets – 1 x 6 pin control socket. 1 x RCA phono socket (video out). 1 x 12vDC in socket, size 2.1mm. Switches – On/off, Pan direction, Tilt direction, and Maximum speed control. Approximate Speed – Variable from 0 to 52 degrees per second. Power Requirements – 12 -15Vdc. Control Box construction – Black powder coated aluminium with non slip feet and ¼” threaded mounting hole. Mains adapter 100-240v AC to 15Vdc. Control Cable – Length 5 metres.
Price includes:- K18 CamCrane with PH200 Pro Pan & Tilt Power Head, Control Box Mounting Bracket and Monitor Bracket. Price does not include the Camera, Tripod, Dolly, Monitor or any of the other accessories shown.
Hague K18-UPH (K18UPH, K18 UPH, K18/UPH, k18-uph) Camera Crane Jib With Remote Controlled Powerhead
The Hague CamCrane K18 with UPH Underslung Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 2kg (4.4lbs) in weight.
Once balanced the camera can smoothly move from ground level to almost 7 metres high and the crane will pan 360 degrees. You have the choice of using the CamCrane at it’s full length or without two of the centre sections. At it's full length support cables are used to improve rigidity. The counterbalance arm has an adjustable fine trim weight and a weight bar with handgrips. Standard bar weights are used for counterbalance (not supplied). A supplied monitor bracket enables a LCD monitor to be fastened to the crane, making it easier to monitor your shots.
The electronic motorized Underslung Pan & Tilt Power Head is suitable for all handheld camcorders and DSLRs that weigh less than 2kg. The Power Head fastens to the crane with the supplied screws. The camera is mounted underslung with a tilt movement of 360 degrees, this enables the camera to point directly downwards when required. The head also pans 360 degrees on the end of the crane. The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control.
The K18 CamCrane is made of aluminium and breaks down into 5 main sections, making it easier to handle in transit. It is supplied in a cardboard carton but an optional transit case is also available.
K18 CamCrane - Specifications
Length from stand/tripod to camera 427cm at its longest length, or 210cm at its shortest length. Length from stand/tripod to weight bar 143cm. Total length: 570cm or 350cm at its shortest length. Vertical crane movement from ground level to 695cm high (at its longest length) or 226cm (at its shortest length). The maximum vertical crane movement includes going down as well as up, so the crane would need to be on a raised area to achieve the full movement. Colour – Black. Transit Size: 120 x 18 x 16 cm. Weight: 17kg (37.5lbs).
UPH Remote Pan & Tilt Head - Specifications
Weight – 1.7kg. (3.75lbs) Dimensions – 356x240x103mm (14x9.5x4 inches). Head sockets – 1 x 7 pin din, 1 x 6v DC in. Vertical Tilt & Horizontal Pan- 360 Degrees. Approximate speed – Pan & Tilt variable from 4 to 8 degrees per second. On/Off switch. Power Requirements – AA Batteries x 4. Head construction – Black ABS plastic and powder coated CNC machined aluminium. Maximum Camera Weight - 2kg.
UPH Hand Held Controller - Specifications
Dimensions – L125 x W45 x H15mm. Control cable with 7 pin din plug. Speed - Slider control.
Price includes:- K18 CamCrane with UPH Underslung Power Head and MB/A Monitor Bracket. Price does not include the Camera, Tripod, Dolly, Monitor or any of the other accessories shown.
Power Source 4 AA Batteries Vertical Tilt 360 Degrees Horizontal Pan 360 Degrees Approx. Max. Speed- Vertical Tilt 8 Degrees per sec. Approx. Min. Speed- Vertical Tilt 4 Degrees per sec. Approx. Max. Speed- Horizontal Pan 8 Degrees per sec. Approx. Min. Speed- Horizontal Pan 4 Degrees per sec. Auto Pan Settings Not available Maximum...
Hague K3 (K-3, K 3, K/3, k3) Mini Camera Jib Traveller
The Hague Mini Jib Traveller K3 is small, compact, lightweight and easy to take anywhere. Measuring just 82cm for transit, and weighing just 2kg, this jib is ideal for people on the go. It’s ideal for both DSLRs and all handheld camcorders under 3kg, or could be used with action cameras such as the GoPro for an even more lightweight set-up. The Mini Jib Traveller is fastened directly to the video head of any sturdy tripod, in the same way you would attach your camera. It can be mounted using both 1/4” and 3/8” screws.
On the end of the jib is a camera plate mounted on a pulley with a control cable coming down the jib to a second pulley at the side of the video head on the tripod. It is this control cable that keeps the camera level as the jib is raised or lowered. Tilting the tripod’s video head controls the camera pulley on the end of the jib, enabling the camera to be tilted up or down. The radial ball bearings in the pulley ensure a very smooth tilt movement. The jib has a telescopic weight bar which can be adjusted to counterbalance the camera with standard bar weights (not supplied) or a sandbag used for counterbalance.
An additional feature of the Mini Jib Traveller is the ability to mount the jib horizontally so you can create sideways tracking movement, similar to a slider, or the camera can be positioned to move forward or back. Combine this with using the pan bar on the video head and some very unusual shots can be achieved.
Specifications: Up and Down Crane movement - 140cm, Length from tripod to camera - 72cm, Telescopic weight bar length 20 - 70cm, Total maximum length 146cm, Transit Size: 82 x 10 x 7cm, Weight: 2kg.
Includes K3 Mini Jib Traveller with tilt facility. The price does not include the tripod, camera, weights or any other accessories shown.
