Material – Glass Fibre Pole Max Height – 6m Minimum Height – 1.75m Max Payload – 2kg (Ideal camera weight up to 1.5kg at maximum height) Number of Sections – 4 Smallest Section Diameter – 26mm OD Largest Section Diameter – 36mm OD Weight – 1.77kg Colour – Grey Price includes the Highshot Camera Pole...
* Suitable for camcorders & DSLR cameras * Supports up to 3kg. * Quick release camera plate * Support from the shoulder to the waste for maximum stability * Fully adjustable The Hague PS Pro Steadymount is an alternative support to a tripod when steady shots are required. It may not always be convenient to...
Compatibility: All types of handheld cameras up to 1.5kg
* Suitable for handheld camcorders & DSLR's * Supports up to 3kg. * Quick & simple use * As used on Top Gear * Two suction pads for extra stability
* Suitable for professional car photography * Supports up to 2kg. * Telescopic bar * Ideal for car photography * Achieve distance from the vehicle The Hague SM11 Telescopic Camera Suction Mount for cars allows a stills camera to be mounted away from the vehicle to create some very unusual shots. At it's longest...
Power Source 4 AA Batteries Vertical Tilt + - 15 Degrees Horizontal Pan 340 Degrees Approx. Max. Speed- Vertical Tilt 2.4 Degrees per sec. Approx. Min. Speed- Vertical Tilt 1.2 Degrees per sec. Approx. Max. Speed- Horizontal Pan 8 Degrees per sec. Approx. Min. Speed- Horizontal Pan 4 Degrees per sec. Auto Pan Settings 45,...
The Superclamp & Variable Friction/Magic Arm can be attached to any pole, tube, bench or table. Its jaws will attach to anything between 12 to 55mm in width. It can be fixed either vertically or horizontally. The Magic Arm with reversible camera plate extends to 53cm.and can be set at any angle or direction. One...
Camera Weight Supports: up to 2kg Wall bracket base diameter: 90mm with 3 screw holes for fixing Distance (wall to camera screw): 50 to 575mm
Height: 108mm Width: 125mm Distance from bottom of bowl to base plate: 60mm Weight: 600g Supports: up to 20kg
Camera Support: up to 20kg Size: approx 520 x 125 x 45mm
Hague DSS (DS-S, DS/S, DS_S, DS S) Dual Shoulder Supports With Rod Clamp
The Hague Dual Shoulder Supports rest on both shoulders to give the camera much more stability than rigs that just rest on one shoulder. When all the rigs weight is in front of the shoulders it is much more effective to have it rested across the two shoulders and this helps with both stability and weight distribution.
However if the operator prefers the rig to rest on one shoulder the shoulder supports can be adjusted for single shoulder operation. The clamp on the shoulder supports secures it to the two rods and allows it to be used with the Hague DSR Dual Shoulder Support or other systems that are using the standard 15mm x 60mm pitch rod system.
Compatible Camera Weight: 1.5kg. Suction Pad Diameter: 150mm
Compatibility: Vehicle, non-porous surface Suction Pads Diameter: 120mm
Hague SC1 (SC-1, SC/1, sc1) Superclamp With Ball Levelling Head For Cameras
The Hague SC1 Superclamp with Ball Leveller can be used to secure the camera to a pole, tube, bench or table. Its jaws will attach to anything between 12 to 55mm in width.
It can be fixed either vertically or horizontally. The camera attaches to the ball levelling head making it ideal for all types of handheld camera up to 1.5kg.
Camera Supports: up to 3kg Wall Bracket base diameter: 90mm Distance from wall to camera screw: 50 to 190mm
Colour: Black Payload: Up to 16kg
Material – 3K Carbon Fibre Max Height – 7.11m Minimum Height – 1.70m Max Payload – 2kg (Ideal camera weight up to 1.5kg at maximum height) Number of Sections – 5 Smallest Section Diameter – 27mm OD Largest Section Diameter – 41mm OD Weight – 1.61kg Colour – Black
Hague LEV (L-E-V, l/e/v, L_E_V, lev) Levitator Stabilizer
The Hague Levitator is a camera support system similar to a Camframe or Fig Rig, but which has the stabilizing effect of a Steadicam. Like the Fig Rig the support is held by both hands, but the Levitator’s handles are totally free moving and the camera is self balancing, similar to a Steadicam but without the need for counterbalance weights. It’s this combination that gives the camera a levitating effect as if it is floating through the air.
The Levitator uses the camera’s own weight for counterbalance, so there is no need for counterbalance weights as used on most “Steadicam type” stabilizers. This reduces the weight of the support and the twin handle design makes it easier to hold for long periods. Once the camera is balanced, the Levitator gives the camera a truly floating effect with easy directional and tilt control with the two handles.
As there is very little restriction above or below the camera, the Levitator can simply skim over or under items creating shots unattainable from other devices. The sealed radial bearings in the pivot cups and the ball socket handles reduce hand movement as you move around.
It’s quick and simple to set up and the quick release camera plate makes it easy to get your camera on and off the support. Extra mounting holes and a cold shoe enables you to attach any extra accessories to the Levitator. The supplied rigging stands make it easy to adjust the Levitator’s fine trim controls until optimum balance is achieved. Also included is a Balance Correction Adapter, this is only required when heavy lenses are mounted to the camera making it very front heavy, or accessories are mounted to the camera that may affect the cameras centre of balance.
Length of each section: 215mm (8 1/2") Width: 125mm (5") Thickness: 10mm (3/8") Material: Powder-coated aluminium Colour: Black
Weight: 0.45lbs (206g) Length (arms without threads): 8.3" (21.08cm) Payload: 1kg
Power Source: 4 AA Batteries Vertical Tilt: + - 15 Degrees Horizontal Pan: 360 Degrees Approx. Max.: Speed- Vertical Tilt 2.4 Degrees per sec. Approx. Min.: Speed- Vertical Tilt 1.2 Degrees per sec. Approx. Max.: Speed- Horizontal Pan 8 Degrees per sec. Approx. Min.: Speed- Horizontal Pan 4 Degrees per sec. Auto Pan Settings: Not...
