Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer, A/D converter 16bit 48kHz Capsule: 0.50" Polar Pattern: Cardioid Resolution: 16-bit Address Type: Side Frequency Range: 20Hz - 20kHz Maximum SPL: 110dBSPL Power Options: USB bus powered Weight: 520g Dimensions: 184mmH x 62mmW x 50mmD Output: USB Output
Acoustic & Electrical Specification Transmission Type: 2.4GHz Digital Frequency Agile System Acoustic Principle: Pre-polarised pressure transducer Polar Pattern: Omnidirectional Equivalent Input Noise @ Maximum Gain: 21.8dB (A-Weighted) Frequency Range: 50Hz - 20kHz External Mic Input: 20Hz - 20kHz Maximum Output Level: +3dBu Maximum SPL: 100dB SPL (1kHz @ 1m) Dynamic Range: 100dBA (Mic Preamplifiers) Power...
Dimensions: 100.00mmH x 0.00mmW x 0.00mmD
Acoustic Principle: Pressure gradient Active Electronics: Electret condenser, A/D and USB interface Polar Pattern: Cardioid Frequency Range: 20 Hz – 20 kHz Input SPL @ 1% THD: 121dB (A-weighted, as per IEC651) Sample Rates: 48 kHz Bus Powered: Yes Bit Depth: 24-bit Analog Outputs: 3.5mm headphone Computer Connectivity: USB - simultaneous I/O Mono input, stereo...
Acoustic Principle: RF-bias condenser Active Electronics: RF-bias demodulation Polar Pattern: Supercardioid shotgun Frequency Range: 20 Hz – 20 kHz Frequency Response: 100 Hz - 20 kHz ±3 dB // 50Hz - 20 kHz ±6 dB Output Impedance: 25 Ω Signal to Noise Ratio: 84 dB Equivalent Noise: 10 dB SPL (A-weighted, as per IEC651) Input...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: Cardioid Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 100Ω Maximum SPL: 137dBSPL Maximum Output Level: 13.7mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2...
Acoustic Principle: Dynamic Active Electronics: Analogue signal conditioning + A/D and USB interface Polar Pattern: Cardioid Resolution: 24-bit Sampling Rate: 44-96kHz Address Type : End Frequency Range: 40Hz - 14kHz Maximum SPL: 115dBSPL Sensitivity: -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz Power Options: USB bus powered Weight: 655.00g...
ACOUSTIC & ELECTRICAL SPECIFICATION Frequency Range Mic Inputs: 20 Hz – 20 kHz, -3dB at 20 Hz (high-pass filter) Monitor Outputs: 20 Hz – 20 kHz better than ±0.5dB Input Impedance: 600Ω (Mic Preamplifiers) Equivalent Noise: –125dBA (A-Weighted, measured as per IEC651) Maximum Output Level: +3dBu (Monitor Outputs) Headphone Output Power: Max output power at...
Acoustic Principle Pressure Gradient Active Electronics JFET Capsule: 0.10" Polar Pattern Omnidirectional - picks up all sides equally Address Type End Frequency Range: 20Hz - 20kHz (selected HPF @ 0) Output Impedance 0Ω Maximum SPL 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level 189.0dBu (@ 1kHz, 1% THD into 1KΩ load)...
Acoustic Principle: Permanently Polarised Condenser Polar Pattern: Omni-directional Frequency Range: 20Hz - 20kHz Output Impedance: 3k Ω Typical Signal to noise Ratio: 67 dB Equivalent Noise: 27 dB Typical Maximum SPL: 110 dB Sensitivity: -35dB (17.8mV @94dB SPL) Dynamic Range: 83dB Typical Power Requirements: Powered from plug-in power TRS socket (2.7V) Output Connection: Gold-plated TRS...
Material: Faux Fur Outer Diameter: 3.2" / 8 cm Length: 3.2" / 8 cm Weight: 25.00gm Dimensions: 80.00mmH x 80.00mmW x 80.00mmD
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: CardioidOmnidirectionalFigure8 Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL: 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 16.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -36.0dB re 1...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Polar Pattern: Cardioid Address Type: End Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL: 143dBSPL Maximum Output Level: 13.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity:-38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB...
Weight: 682.00g Dimensions: 210.00mmH x 133.00mmW x 210.00mmD
Material: Aluminum Sections: 5 Minimum Length: 33" (84cm) Maximum Length: 10' (3 m) Weight: 940.00g Dimensions: 3232.50mmH x 40.00mmW x 40.00mmD
r-cardioid polar response & HPF. 48V powered. Supplied with pouch, RM5 stand mount & WSVM windshield. Suspension shock mount (stand adaptor). A shotgun microphone suspension shock mount with a stand mount adaptor. Designed to reduce vibration transmission to shotgun microphones. Features a 4-way rubber suspension with friction tilt mechanism, and a 3-way mounting...
Transducer Condenser Polar Pattern Line-gradient supercardioid Frequency Response 40 Hz to 20 kHz Dynamic Range (Typical) 117 dB Signal-to-Noise Ratio 81 dB SPL (A-weighted) Maximum Input Sound Level 130 dB Power Requirements 48V Phantom power Nominal Impedance 25Ω Output Connectors 3-pin XLR Pad No Low Frequency Roll-Off No Dimensions (L x Diam) 10 x 0.74"...
Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter Capsule: 0.50" Polar Pattern: Cardioid Address Type: End Frequency Range: 100Hz - 20kHz Maximum SPL: 140dBSPL Sensitivity: -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted): 20dBA Power Options Weight: 42g Dimensions: 21mmH x 21mmW x 80mmD...
Transmission type: 2.4GHz Fixed Frequency Agile System System dynamic range: 112dB Range (distance): Up To 100m Frequency range: 35Hz - 22kHz Maximum output level: 1v Rms (2.8v P-p) Max input signal level: 1v Rms (2.8v P-p) Max latency: 4ms Receiver (RX-CAM) Power source: 2 X AA Battery Or MicroUSB Antenna: Internal Output connection: 3.5mm TRS...
Interface Max Sample Rate/Resolution: 96 kHz / 24-Bit Connectivity Host Connection: USB Type-C Analog I/O: 1 x Combo XLR / 1/4" Input 2 x 1/4" (6.3 mm) Balanced Output 1 x 1/4" (6.3 mm) TRS Headphone Output Phantom Power: +48 V Performance Frequency Response: 20 Hz to 20 kHz ±1 dB Gain Range Inputs: 0...
ACOUSTIC & ELECTRICAL SPECIFICATION Acoustic Principle: Pressure Gradient Electret Condenser Polar Pattern: Cardioid Frequency Range: 20Hz-20kHz Signal to noise Ratio: 74.5 dB Equivalent Noise: 19.5 dBA SPL (as per IEC651) Maximum SPL: 115 dB SPL (1kHz @ 1m) Power Requirements: Powered by iOS device Output Connection: Lightning, 3.5mm TRS Analog Outputs: 3.5mm TRS Headphone Jack...
Computer Connectivity: USB Form Factor: Desktop Simultaneous I/O: 1 x 2 Number of Preamps: 1 Phantom Power: Yes Bit Depth: 24-bit Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz & 96 kHz Analog Inputs: 1 x Neutrik XLR-1/4” combo Analog Outputs: 2 x 1/4” (impedance balanced) 1 x 1/4” (headphones) Direct Monitor: Yes USB: 1 x USB Type C...
ACOUSTIC & ELECTRICAL SPECIFICATION Acoustic Principle: Dynamic Polar Pattern: Cardioid Frequency Range: 20Hz ~ 20kHz Output Connection: XLR Output Output Impedance: 320Ω Sensitivity: -57.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz MECHANICAL SPECIFICATION Colour: Black Weight (g): 937 Dimensions (L x W x H, mm): 172 x 109 x...
ACOUSTIC & ELECTRICAL SPECIFICATION Frequency Range Mic Inputs: 20 Hz – 20 kHz, -3dB at 20 Hz (high-pass filter) Monitor Outputs: 20 Hz – 20 kHz better than ±0.5dB Input Impedance: 600Ω (Mic Preamplifiers) Equivalent Noise: –125dBA (A-Weighted, measured as per IEC651) Maximum Output Level: +3dBu (Monitor Outputs) Headphone Output Power: Max output power at...
