Arri L2.76040.B EBB 125/200, 20-34 VDC
Sell Your Gear
warranty on this product

Arri L2.76040.B EBB 125/200, 20-34 VDC

code: L2.76040.B
Please login to view our prices
Status   |   Usually dispatched within 24 hours
Loading...
Make An Offer
Ask a Question
Price Match
Add to Compare

L2.76040.B EBB 125/200, 20-34 VDC, 150 Hz, XLR-4 plug, 125 W-connector: Binder, 200 W-conector: Amphenol, aluminium profile housing

In addition to its well known electronic ballasts, ARRI has developed several DC ballasts: 125/200W, 200/400W and 575/1200W. The two smaller units can be combined with battery belts for use as portable daylight systems. The bigger 575/1200W DC ballast is often used where no AC public net is available.

Features:

  •     No additional adaptation required
  •     Detection of the connected luminary through lamp connector
  •     Protection against:

        under/over-voltage on DC input
        DC polarity reversal
        overheating

  •     Power switches off automatically after 3 seconds when lamp doesn't strike
  •     Detailed service documentation with test procedures
  •     Good service assistance

Specification:

Electronic Battery Ballast:      
  Versions ARRI Battery ARRI Battery
    EBB 125/200 EBB 200/400
  Ident-No. L2.76040.B L2.76270.B
Mains Supply:      
  Line Power 225 VA (max.) 250 VA (max.) with 200 W lamp
490 VA (max.) with 400 W lamp
  Supply Voltage 20-36 V DC 20-36 V DC
  Nominal Current 11.2-6.3 A 13-7 A with 200 W lamp
25-13 A with 400 W lamp
  Power Factor - -
Lamp Connection:      
  Lamphead connector Binder / Amphenol Amphenol / International
  Lamp Power 125 W / 200 W 200 W / 400 W
  Power Adaption constant control constant control,
automatic detection of lamp type
  Current Characteristic square wave
150 Hz ± 10 Hz
flicker free		 square wave,
approx. 110 Hz
flicker free
  Dimming 50-100% of nominal lamp power 50-100% of nominal lamp power
  Starting cold start and hot restrike cold start and hot restrike
  Typical Light Ripple typ. < 3% typ. < 3%
General:      
  Dimensions 130 x• 67 x• 158 mm 155 x• 91 x• 26 mm
  Weight ca. 1.2 kg ca. 2.6 kg
  Protective Rate IP 22 IP 21
  Ambient Conditions -20 to +45 °C -20 to +50 °C
  Housing aluminium profile housing aluminium profile housing
Indicators:      
  ON / OFF   X
  Protective Earth    
  Lamp On    
  Over Temperature    
  Output Mode (Frequency)    
  Remote / DMX    
  Detected Lamp Power    
Features:      
  Automatic Lamp Recognition   X
  Automatic Lamphead Recognition    
  Active Line Filter (ALF)    
  Compensation for Cable Loss (CCL)    
  Dimming X X
Output Type:      
  50 Hz (low noise)    
  60 Hz (low noise)    
  75 Hz (flicker free)    
  300 Hz (flicker free High Speed)    
  1000 Hz (flicker free High Speed    
Options:      
  DMX    
     
Be the first to review L2.76040.B EBB 125/200, 20-34 VDC. Write a review ›