Arri Lighting Spares

L2.76115.0 EB 200, 115 V/230 V, ALF, 200Hz, without fan, Amphenol connector, blue standard housing with Schuko plug

L2.76125.0 EB 575/1200, 90-125 V/180-250 V, Schuko-Plug, VEAM, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76126.0 EB 575/1200, 90-125 V/180-250 V, Schuko-Plug, VEAM, DMX, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76425.0 EB 575/1200, 90-125 V/180-250 V, Schuko-Plug, VEAM, ALF, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76426.0 EB 575/1200, 90-125 V/180-250 V, Schuko-Plug, VEAM, ALF, DMX, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76427.0 EB 575/1200, 90-125 V/180-250 V, Schuko-Plug, Schaltbau, ALF, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76625.0 EB 1200/1800, 90-125 V/180-250 V, Schuko-Plug, VEAM, ALF, CCL, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76695.0 EB 2500 Baby, 180-250 V, VEAM, ALF, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76635.0 EB 2500, 90-125 V/180-250 V, VEAM, ALF, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76640.0 EB 2500/4000, 180-250 V VEAM, ALF, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

Specification: Electronic Location Ballast     Versions   Ident-No. Mains Supply     Line Power   Supply Voltage   Nominal Current   Power Factor Lamp Connection     Lamphead connector   Lamp Power   Power Adaption   Current Characteristic   Dimming   Starting   Typical Light Ripple General     Dimensions   Weight   Protective Rate   Ambient Conditions   Housing Indicators     ON / OFF   Protective Earth   Lamp On   Over Temperature   Output Mode (Frequency)   Remote / DMX  ...

Find Out More

L2.76646.0 EB 2500/4000, 90-125 V/180-250 V, VEAM, DMX, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

...

Find Out More

L2.76170.0 EB 6000, 180-250 V, VEAM, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76193.0 EB 6000 Baby, 180-250 V, VEAM, ALF, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76172.0 EB 6/12 kW, 90-125 (only 6 kW!) / 180-250 V, VEAM, ALF, blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76182.0 EB 6/12 kW, 90-125 (only 6 kW!) / 180-250 V, VEAM, ALF, DMX blue standard housing

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76290.0 EB 12/18 kW, 190-250 V VEAM, ALF, blue standard housing with trolley

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

L2.76295.0 EB 12/18 kW, 190-250 V, VEAM, ALF, DMX, for ARRIMAX, blue standard housing with trolley, Indication Lamp Power 12/18 kW

For over 25 years, discharge lighting ballasts have been an integral part of the ARRI Lighting family. During that course of time, the range has developed to comprise the reliable, robust and efficient components recognised today as the industry standard for film, theatre and events. ARRI Ballasts feature state-of-the-art electronics and offer easy maintenance, automatic fault detection and extensive status indicators, along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI Lighting product line.

Features:

•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Constant lamp power and colour temperature over the lifetime of the lamp
•     Possibility to dim the light between 50 and 100%
•     Automatic switch-over for 115V~ and 230V~ power supplies
•     Low noise switch - noise reduction in the luminary
•     Active Line Filter - power factor correction
•     Line over-voltage protection
•     Protection from overheating
•     Less weight and size compared to magnetic ballasts
•     At least 5% greater light intensity compared to magnetic ballasts
•     At least 20% longer bulb life compared to magnetic ballasts
•     Solid construction, including outside heatsinks as part of housing and a bumper at the operator control panel
•     Special mechanical design for quick opening of the EB in case of service maintenance
•     Good service assistance
•     Detailed technical documentation

L2.76425KH EB 575/1200 Highspeed Ballast, 115/230 V, 50/75/1000Hz, ALF, VEAM, 2 m bare ends, portable, blue standard housing

ARRI is pleased to introduce a new generation of 1000 Hz High Speed Ballasts that accept the challenge of modern digital high-speed photography with ease.

With the new 1000 Hz High Speed Ballasts it is easy to achieve high quality flicker free images even at frame rates of 1000 fps and in many cases beyond even with a single HMI daylight source. This new technology supplies the lamp with a greatly raised 1000 Hz square wave current, allowing worriless shootings for commercials, sports, industrial applications, automotive component testing, ballistics or material testing.

1000 Hz High Speed Ballasts are available for all wattages from 125 W to– 9000 W.

Features:

ARRI 1000 Hz High Speed Ballasts offer the full range of features of the standard electronic ballasts plus the following:

•     1000 Hz Flickerfree light for frame rates up to 5000 fps with multiple sources
•     Additional standard Flickerfree Mode for low noise operation
•     can also be used in environments with low noise requirements (microphones)

L2.76625KH EB 1200/1800 Highspeed Ballast 115/230 V, 50/75/1000Hz, ALF, CCL, VEAM, 2 m Schuko plug, portable, blue standard housing

ARRI is pleased to introduce a new generation of 1000 Hz High Speed Ballasts that accept the challenge of modern digital high-speed photography with ease.

With the new 1000 Hz High Speed Ballasts it is easy to achieve high quality flicker free images even at frame rates of 1000 fps and in many cases beyond even with a single HMI daylight source. This new technology supplies the lamp with a greatly raised 1000 Hz square wave current, allowing worriless shootings for commercials, sports, industrial applications, automotive component testing, ballistics or material testing.

1000 Hz High Speed Ballasts are available for all wattages from 125 W to– 9000 W.

Features:

ARRI 1000 Hz High Speed Ballasts offer the full range of features of the standard electronic ballasts plus the following:

•     1000 Hz Flickerfree light for frame rates up to 5000 fps with multiple sources
•     Additional standard Flickerfree Mode for low noise operation
•     can also be used in environments with low noise requirements (microphones)

L2.76640KH EB 2500/4000 Highspeed Ballast, 230 V, 50/75/1000Hz, ALF, VEAM, 2 m bare ends, portable, blue standard housing

ARRI is pleased to introduce a new generation of 1000 Hz High Speed Ballasts that accept the challenge of modern digital high-speed photography with ease.

With the new 1000 Hz High Speed Ballasts it is easy to achieve high quality flicker free images even at frame rates of 1000 fps and in many cases beyond even with a single HMI daylight source. This new technology supplies the lamp with a greatly raised 1000 Hz square wave current, allowing worriless shootings for commercials, sports, industrial applications, automotive component testing, ballistics or material testing.

1000 Hz High Speed Ballasts are available for all wattages from 125 W to– 9000 W.

Features:

ARRI 1000 Hz High Speed Ballasts offer the full range of features of the standard electronic ballasts plus the following:

•     1000 Hz Flickerfree light for frame rates up to 5000 fps with multiple sources
•     Additional standard Flickerfree Mode for low noise operation
•     can also be used in environments with low noise requirements (microphones)

L2.76675KH EB 2500/4000 Highspeed Ballast, 115/230 V, 60/75/1000Hz, ALF, VEAM, 2 m bare ends, portable, blue standard housing

ARRI is pleased to introduce a new generation of 1000 Hz High Speed Ballasts that accept the challenge of modern digital high-speed photography with ease.

With the new 1000 Hz High Speed Ballasts it is easy to achieve high quality flicker free images even at frame rates of 1000 fps and in many cases beyond even with a single HMI daylight source. This new technology supplies the lamp with a greatly raised 1000 Hz square wave current, allowing worriless shootings for commercials, sports, industrial applications, automotive component testing, ballistics or material testing.

1000 Hz High Speed Ballasts are available for all wattages from 125 W to– 9000 W.

Features:

ARRI 1000 Hz High Speed Ballasts offer the full range of features of the standard electronic ballasts plus the following:

•     1000 Hz Flickerfree light for frame rates up to 5000 fps with multiple sources
•     Additional standard Flickerfree Mode for low noise operation
•     can also be used in environments with low noise requirements (microphones)

Specification: Ballast NameEB 6/9 kW (DMX) EB 6/9 kW (DMX, High Speed) Ident. Nr.: L2.76181.0 L2.76181KH Ballast Type: electronic ballast electronic ballast Lamp Power: 6,000W / 9,000W 6,000W / 9,000W Input Voltage: "180 - 250 V 50/60 Hz Input Current (A) nominal: 56 - 44 A 56 - 44 A Max. Apparent Power (VA): 11200VA...

Find Out More