When shooting in a studio environment, recreating natural lighting or a consistent level of adequate light can often be a challenge. This is where studio lighting comes into play. These reliable and high performing products allow you to achieve well-lit shots, capturing every detail and scene during your production. Here at DigiBroadcast, you’ll discover a huge range of high-quality lighting kits such as production lighting and professional lighting, with fantastic products from the likes of CAME-TV, Panasonic and Rotolight among others available to pick from. For related products, browse our wider range of studio lights and camcorders.
HAR-2404 2ft 4Bank Locking Harness
4Bank System Highlights
• 4-Lamp remote fixture w/ built-in barndoors
• Fixture includes removable Lamp Harness, Reflector and Louver
• Same fixture takes daylight and tungsten lamps, plus visual effects color lamps
• Mounts to stand, light enough to tape to wall
• Removable center mount
• Fixture or lamps w/ harness run up to 75 feet (24 meters) from ballast
• High output, flicker-free ballasts
• Instant-on, dead quiet
• Individual lamp switching - no color shift
• HO/Std switching
• Same ballast runs 4ft and 2ft lamps
• Operates at 1/2 the power of conventional tungsten softlights
• UL listed, CE approved
The 4Bank Fixture houses the lamps and is comprised of a removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are held in place with Velcro fasteners. There is a strain relief on the Lamp Harness to ensure the connectors don’t pull off the lamps during operation. To get the harness away from the fixture, turn the ¼ turn fastener and rotate counter-clockwise to release.
Fixture can be used in several configurations:
1) Complete fixture with all components combined.
2) "Harness Only" - The wiring harness is removed from the fixture so that the user can build a softbox, hide behind Plexiglass or rig into tight locations. The wiring harness uses Kino Flo designed lamp connectors that grab the lamp pins so lamps can be operated independently of the fixture.
3) "Harness + Reflector" - Same as above, but may want to use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove louver to give broad coverage over an area, such as lighting blue and green screens etc.
The fixtures can take a variety of lamps. They can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten source using Kino Flo KF32 or KF29 lamps. A variety of visual effects for blue and green screen as well as designer colors are available.
Kino Flo lamps are color-correct and safety-sleeved. The lamps are safety-sleeved because they can operate inside the fixture or independently with only the wiring harness. Additionally, on a production set the lamps are often changed out. The safety-sleeving offers protection during lamp changes for the user as well as the talent on the set.
HAR-4804 4ft 4Bank Locking Harness
The 4-Lamp Fixture
• Built-in Barndoors
• Removable Lamp Harness, Reflector and Louver
• Twist-on, locking Center Mount
• True Match® daylight and tungsten lamps
4Bank System Highlights
• 4-Lamp remote fixture w/ built-in barndoors
• Fixture includes removable Lamp Harness, Reflector and Louver
• Same fixture takes daylight and tungsten lamps, plus visual effects color lamps
• Mounts to stand, light enough to tape to wall
• Removable center mount
• Fixture or lamps w/ harness run up to 75 feet (24 meters) from ballast
• High output, flicker-free ballasts
• Instant-on, dead quiet
• Individual lamp switching - no color shift
• HO/Std switching
• Same ballast runs 4ft and 2ft lamps
• Operates at 1/2 the power of conventional tungsten softlights
• UL listed, CE approved
The 4Bank Fixture houses the lamps and is comprised of a removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are held in place with Velcro fasteners. There is a strain relief on the Lamp Harness to ensure the connectors don’t pull off the lamps during operation. To get the harness away from the fixture, turn the ¼ turn fastener and rotate counter-clockwise to release.
The Harness wiring is color-coded. The same color-code must match at each end of the lamp for proper operation.
Fixture can be used in several configurations:
1) Complete fixture with all components combined.
2) "Harness Only" - The wiring harness is removed from the fixture so that the user can build a softbox, hide behind Plexiglass or rig into tight locations. The wiring harness uses Kino Flo designed lamp connectors that grab the lamp pins so lamps can be operated independently of the fixture.
3) "Harness + Reflector" - Same as above, but may want to use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove louver to give broad coverage over an area, such as lighting blue and green screens etc.
The fixtures can take a variety of lamps. They can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten source using Kino Flo KF32 or KF29 lamps. A variety of visual effects for blue and green screen as well as designer colors are available.
Kino Flo lamps are color-correct and safety-sleeved. The lamps are safety-sleeved because they can operate inside the fixture or independently with only the wiring harness. Additionally, on a production set the lamps are often changed out. The safety-sleeving offers protection during lamp changes for the user as well as the talent on the set.
FIX-4802 4ft Double Fixture Shell
Award-winning 4ft 4Bank portable lighting systems have changed the way professionals light everything from feature films to television productions to video and still photography.
4Bank System Highlights
• 4-Lamp remote fixture w/ built-in barndoors
• Fixture includes removable Lamp Harness, Reflector and Louver
• Same fixture takes daylight and tungsten lamps, plus visual effects color lamps
• Mounts to stand, light enough to tape to wall
• Removable center mount
• Fixture or lamps w/ harness run up to 75 feet (24 meters) from ballast
• High output, flicker-free ballasts
• Instant-on, dead quiet
• Individual lamp switching - no color shift
• HO/Std switching
• Same ballast runs 4ft and 2ft lamps
• Operates at 1/2 the power of conventional tungsten softlights
• UL listed, CE approved
Fixture can be used in several configurations:
1) Complete fixture with all components combined.
2) "Harness Only" - The wiring harness is removed from the fixture so that the user can build a softbox, hide behind Plexiglass or rig into tight locations. The wiring harness uses Kino Flo designed lamp connectors that grab the lamp pins so lamps can be operated independently of the fixture.
3) "Harness + Reflector" - Same as above, but may want to use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove louver to give broad coverage over an area, such as lighting blue and green screens etc.
The fixtures can take a variety of lamps. They can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten source using Kino Flo KF32 or KF29 lamps. A variety of visual effects for blue and green screen as well as designer colors are available.
Kino Flo lamps are color-correct and safety-sleeved. The lamps are safety-sleeved because they can operate inside the fixture or independently with only the wiring harness. Additionally, on a production set the lamps are often changed out. The safety-sleeving offers protection during lamp changes for the user as well as the talent on the set.
FIX-2402 2ft Double Fixture Shell
The 2-Lamp Fixture
• Built-in Barndoors
• Removable Lamp Harness, Reflector and Louver
• Twist-on, locking Center Mount
• True Match® daylight and tungsten lamps
Double System Highlights
• 2-Lamp remote fixture w/ built-in barndoors
• Fixture includes Reflector, Louver, and removable Harness
• Same fixture takes daylight and tungsten lamps, plus visual effects color lamps
• Mounts to stand, light enough to tape to wall
• Removable center mount
• Fixture or lamps w/ harness run up to 75 feet (24 meters) from ballast
• High output, flicker-free ballasts
• Instant-on, dead quiet
• Individual lamp switching - no color shift
• HO/Std switching
• Same ballast runs 4ft and 2ft lamps
• UL listed, CE approved
The Double fixture houses the lamps and includes a removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are held in place with Velcro fasteners. There is a strain relief on the lamp harness to ensure the connectors don’t pull off the lamps during operation. To get the harness away from the fixture, turn the ¼ turn fastener and rotate counter-clockwise to release.
Fixture can be used in several configurations:
1) Complete fixture with all components combined
2) "Harness Only" - The wiring harness is removed from the fixture so that the user can build a softbox, hide behind Plexiglass or rig into tight locations. The wiring harness uses Kino Flo designed lamp connectors that grab the lamp pins so lamps can be operated independently of the fixture.
3) "Harness + Reflector" - Same as above, but may want to use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove louver to give broad coverage over an area.
The fixtures can take a variety of lamps. They can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten source using Kino Flo KF32 or KF29 lamps. A variety of visual effects for blue and green screen as well as designer colors are available.
Kino Flo lamps are color-correct and safety-sleeved. The lamps are safety-sleeved because they can operate inside the fixture or independently with only the wiring harness. Additionally, on a production set the lamps are changed out. Safety-sleeving offers protection during lamp changes for the user as well as the talent on the set.
Compatibility: Celeb 400
7010045 Celeb 400 Yoke Assembly
The Celeb® 400 joins Kino Flo’s line of LED lighting systems. The Celeb 400 boasts the same technical innovations as the Celeb 200: dial-in white light from 2700 to 5500 Kelvin and presets with programmable settings; full range dimming without flicker or color shift. Light levels do not change when selecting Kelvin settings.
As with the award-winning line of Kino Flos, the Celeb’s soft, even True Match® light quality (CRI 95) produces color faithfully, beautifully on HD or film, in the studio or on location.
The Celeb 400 DMX operates at universal input from 100VAC-240VAC. The slim profile fixture produces more lumens than a 1K tungsten soft light, yet uses only 1.8A (120VAC) compared to a tungsten softlight at 8.3A. The Celeb 400 can also be powered by 24VDC battery.
The Celeb 400 comes complete with molded accessory holders, removable gel frame and honeycomb louver and is available in three styles: Center Mount, Yoke Mount and Pole-Op.
Features include:
• Kelvin presets and custom settings between 2700-5500K
• Universal Input 100VAC-240VAC or 24VDC
• Onboard and DMX dimming
• Flicker-free, dead quiet operation
• Honeycomb Louver
• Gel Frame
• Center Mount, Yoke Mount and Pole-Op
Celeb 400 DMX LED Highlights
• Five Kelvin presets
• Dial-in color temperature control between 2700-5500K
• Can use preset buttons to store custom Kelvin settings
• Light levels do not change when selecting Kelvin settings
• Color-correct with high color rendering index (CRI 95)
• Universal Input 100VAC-240VAC or 24VDC
• Energy efficient, draws 1.8A, 120VAC
• Flicker-free, dead quiet operation
• Full range onboard and DMX dimming
• No color shift while dimming
• All-in-one metal alloy design with built-in electronics
• Fixture includes Gel Frame and 90° Honeycomb Louver
• Honeycomb louver also available in 60°
• Slim profile
• Mounts to stand or can hang easily from a grid
• Accessory molded corners also used for four-point rope hang
Kino Flo 7010046 Celeb 400 Pole-Op Assembly
The Celeb 400 Pole-Op fixture includes a yoke with an attached junior pin. They can be hung from a grid with a Junior pipe hanger.
The blue cup alters the Pan (left or right) and the white cup alters the Tilt (up or down).
The Celeb® 400 joins Kino Flo’s line of LED lighting systems. The Celeb 400 boasts the same technical innovations as the Celeb 200: dial-in white light from 2700 to 5500 Kelvin and presets with programmable settings; full range dimming without flicker or color shift. Light levels do not change when selecting Kelvin settings.
As with the award-winning line of Kino Flos, the Celeb’s soft, even True Match® light quality (CRI 95) produces color faithfully, beautifully on HD or film, in the studio or on location.
The Celeb 400 DMX operates at universal input from 100VAC-240VAC. The slim profile fixture produces more lumens than a 1K tungsten soft light, yet uses only 1.8A (120VAC) compared to a tungsten softlight at 8.3A. The Celeb 400 can also be powered by 24VDC battery.
The Celeb 400 comes complete with molded accessory holders, removable gel frame and honeycomb louver and is available in three styles: Center Mount, Yoke Mount and Pole-Op.
Features include:
• Kelvin presets and custom settings between 2700-5500K
• Universal Input 100VAC-240VAC or 24VDC
• Onboard and DMX dimming
• Flicker-free, dead quiet operation
• Honeycomb Louver
• Gel Frame
• Center Mount, Yoke Mount and Pole-Op
Celeb 400 DMX LED Highlights
• Five Kelvin presets
• Dial-in color temperature control between 2700-5500K
• Can use preset buttons to store custom Kelvin settings
• Light levels do not change when selecting Kelvin settings
• Color-correct with high color rendering index (CRI 95)
• Universal Input 100VAC-240VAC or 24VDC
• Energy efficient, draws 1.8A, 120VAC
• Flicker-free, dead quiet operation
• Full range onboard and DMX dimming
• No color shift while dimming
• All-in-one metal alloy design with built-in electronics
• Fixture includes Gel Frame and 90° Honeycomb Louver
• Honeycomb louver also available in 60°
• Slim profile
• Mounts to stand or can hang easily from a grid
• Accessory molded corners also used for four-point rope hang
Closure Type: Latch Carry and Transport Options: Handle Material of Construction: Plastic Exterior Dimensions (W x H x D): 53.5 x 9 x 23.5" / 136 x 23 x 60 cm Weight: 26.5 lb / 12 kg
SPA7x2DT PanAura7 KIT daylight
In the box:
|
DLHPA7x2DT | softlighthead for two lamps 400/575W daylight or tungsten | |
| 2 | DEB400DT | flicker free ballast, 400/575W | |
| 2 | DEB400DTH | Ballast holder w/super clamp | |
| 2 | DPOW400DT | Light head cable (to ballast) | |
| 2 | DL400DHR-NB | Metal halide lamp 400/575W daylight clear | |
| 2 | DL400THR-NB | Metal halide lamp 400/575W Tungsten clear | |
| 1 | DLPA7 | dedoflex panaura7 textile reflector, | |
| 1 | DLPA7G | grid 40°, fits panaura7 | |
| 1 | DST400S | Dedolight stackable stand, small | |
| 1 | DSCPA7W | softcase (panaura kit) with wheels |
SPA7x2T PanAura7 KIT tungsten
In the box:
| 1 | DLHPA7x2T | softlighthead for two lamps 1000 watts, tungsten |
| 1 | DLPA7 | dedoflex panaura7 textile reflector, |
| 1 | DLPA7G | grid 40°, fits panaura7 |
| 1 | DSCPA7W | softcase (panaura kit) with wheels |
| 2 | CP77 | 1000W 24OV GY9.5 300H |
Specification: dimensions (LxWXH): 220x95x70 mm (8.7x3.75x2.75 in) weight: 960 g input voltage: 11 - 36 VDC luminous intensity: 550 cd at 66 HPA power consumption: 35 watts operating temperature: -4°F - +95°F / -20°C - +35°C storage temperature: -4°F - +140°F / -20°C - +60°C protection class: IP20 electrical safety: III (SELV) color temperature range:...
Specification: Type of Lamphead: Par Power: 125 W Lamp Type: HMI 125 W/SE Correalated Color Temperature: 6000 K Lamp Base: GZX9.5 Lens Diameter: 77 mm Barn Door Size: special system Filter Insertion Size: special system Mounting: Spigot 16mm Weight: 1.1 kg ( 2.5 lb) Packed Size: 345 mm - 140 mm - 120 mm Packed...
Specification: Type of Lamphead: Par Power: 200 W Lamp Type: HMI 200 W/SE Correalated Color Temperature: 6000 K Lamp Base: GZY9,5 Lens Diameter: 105 mm Barn Door Size: 130 mm Filter Insertion Size: 130 mm Mounting: Spigot 16mm Weight: 2.1 kg (4.6 lb) Packed Size: 700 mm - 440 mm - 300 mm Packed Volume:...
Specification: Type of Lamphead: Par Power: 200 W Lamp Type: HMI 200 W/SE Correalated Color Temperature: 6000 K Lamp Base: GZY9,5 Lens Diameter: 105 mm Barn Door Size: 130 mm Filter Insertion Size: 130 mm Mounting: Spigot 16mm Weight: 2.1 kg (4.6 lb) Packed Size: 700 mm - 440 mm - 300 mm Packed Volume:...
Specification: Type of Lamphead: PAR Power: 400 W Lamp Type: HMI 400 W/SE Correalated Color Temperature: 6000 K Lamp Base: GZZ9,5 Lens Diameter: 125 mm Barn Door Size: 170 mm Filter Insertion Size: 170 mm Mounting: Spigot 16mm Weight: 2.9 kg (6.1 lb) Packed Size: 690 mm - 390 mm - 290 mm Packed Volume:...
Specification: Type of Lamphead: PAR Power: 400 W Lamp Type: HMI 400 W/SE Correalated Color Temperature: 6000 K Lamp Base: GZZ9,5 Lens Diameter: 125 mm Barn Door Size: 170 mm Filter Insertion Size: 170 mm Mounting: Spigot 16mm Weight: 2.9 kg (6.1 lb) Packed Size: 690 mm - 390 mm - 290 mm Packed Volume:...
Specification: Type of Lamphead: Open Face with facet reflector Power: 750 W Lamp Type: 120V/230V - HPL* 750W, 575W, 375W 230V - 600 (GKV), 650W (FKR), 800W (HX800) 120V - 500W(EHC), 750W (EHF,SPH) Supply Voltage: 230V, 120V Correlated Color Temperature: 3200 K Lamp Base: G 9.5 Reflector: ARRIMAX Weight: 1.6 kg (3.55 lb) Cable Length:...
Specification: Type of Lamphead: Open Face with facet reflector Power: 750 W Lamp Type: 120V/230V - HPL* 750W, 575W, 375W 230V - 600 (GKV), 650W (FKR), 800W (HX800) 120V - 500W(EHC), 750W (EHF,SPH) Supply Voltage: 230V, 120V Correlated Color Temperature: 3200 K Lamp Base: G 9.5 Reflector: ARRIMAX Weight: 1.6 kg (3.55 lb) Cable Length:...
Specification: Type of Lamphead: Open Face with facet reflector Power: 750 W Lamp Type: 120V/230V - HPL* 750W, 575W, 375W 230V - 600 (GKV), 650W (FKR), 800W (HX800) 120V - 500W(EHC), 750W (EHF,SPH) Supply Voltage: 230V, 120V Correlated Color Temperature: 3200 K Lamp Base: G 9.5 Reflector: ARRIMAX Weight: 1.6 kg (3.55 lb) Cable Length:...
Specification: Type of Lamphead: Open Face with facet reflector Power: 750 W Lamp Type: 120V/230V - HPL* 750W, 575W, 375W 230V - 600 (GKV), 650W (FKR), 800W (HX800) 120V - 500W(EHC), 750W (EHF,SPH) Supply Voltage: 230V, 120V Correlated Color Temperature: 3200 K Lamp Base: G 9.5 Reflector: ARRIMAX Weight: 1.6 kg (3.55 lb) Cable Length:...
Specification: Type of Lamphead: Open Face with facet reflector Power: 2000 W Lamp Type: FEX 2000 W - 230 V, FEY 2000 W - 120V Supply Voltage: 230V, 120V Correlated Color Temperature: 3200 K Lamp Base: RX7x Reflector: ARRIMAX Weight: 3 kg (6.61 lb) Cable Length: 3 m with inline switch Mounting: 16 mm mount...
Specification: Type of Lamphead: Open Face with facet reflector Power: 2000 W Lamp Type: FEX 2000 W - 230 V, FEY 2000 W - 120V Supply Voltage: 230V, 120V Correlated Color Temperature: 3200 K Lamp Base: RX7x Reflector: ARRIMAX Weight: 3 kg (6.61 lb) Cable Length: 3 m with inline switch Mounting: 16 mm mount...
Specification: Type of Lamphead Fresnel Power 650 W Lamp Type CP/89 FRK 650 W 120 V GY9,5CP/89 FRL 650 W 230 V GY9,5 Supply Voltage 230 V /120 V Correlated Color Temperature 3200 K Lamp Base GY9,5 Lens Diameter 112 mm Barn Door Size 168 mm Filter Insertion Size 168 mm Mounting Socket 16 mm...
L0.76599.S Softbank IV Plus lighting set
Choosing an ARRI Lighting Kit
The best kit for your application depends on your production needs and artistic preferences. Ideally the kit should offer flexibility to work in many different situations. You'll want to consider fixture types, total wattage and the size and weight of the kit. If you need softer lighting you should look carefully at the kits containing Chimera Softbanks. The first step is to determine what light source best suits your needs.
Softbank IV Plus Kit (Schuko) with wheels contains:
