Maximum Output| 120W / 10A Dimensions| 96(W) x 135(H) x 27(D) mm Weight| 200g approx
Height: 101 mm Width: 101 mm
Compatible Batteries: NP-L7S Compatible Chargers: All ENDURA chargers Dimensions: 76(W) x 143(H) x 41(D) mm Weight: 270 grams approx.
Maximum Plate Output: 120W/10A Dimensions: 73(W) x 149(H) x 12.7(D) mm Weight: 99 grams approx.
XLR Pin Assignment: 1. ( – ), 4. ( + ) D-Tap Output Voltage: 12~16.8V DC Maximum Plate Output: 120W/10A Dimensions: 67(W) x 106(H) x 35(D) mm Weight: 270 grams approx.
SPECIFICATION:Input Voltage:Quick Charge Current:Dimensions:Weight: AC100~240V 50/60Hz 2.3A: Li-ion batteries151(W) x 70(H) x 212(D) mm800g approx.
Maximum Output for D-Tap:: 50W Dimensions:: 3.25(W) x 5.59(H) x 0.47(D) inches Weight: P-V2: 0.36 lbs. approx.
Max D-Tap Output: 50W Dimensions: 82.5(W) x 142(H) x 12(D) mm Weight: 180g approx.
Max. output for D-Tap: 50W Dimensions: 82.5(W) x 142(H) x 12(D) mm Weight: 180g approx.
SPECIFICATION: Quick charge current: All ENDURA & NP-style Li-ion batteries - 2.3A.; Ni-Cad batteries – 1.9A Input Voltage: AC100-240V 50/60Hz Dimensions: 5.94(W)x3.11(H)x8.35(D) inches Weight: 2.09 lbs approx Compatible batteries: All IDX ENDURA System Li-ion batteries and all IDX NP-style Li-ion batteries via A-E2NP charger adaptor.4-pin XLR power supply connecting cable is included (10 ft.).
Battery Capacity: 4.6Ah* (9.6Ah as one pair) Maximum Load: 55W (110W as one pair) End Voltage: 12V Dimensions: 82(W) x 153(H) x 21(D) mm Weight: 420g approx.
DC output: D-Tap 1: 5V/7.3V (switchable), D-Tap 2: Battery voltage Dimensions (mm): 82.5(W) x 142(H) x 12(D) Weight: 180g approx.
DC output: D-Tap 1: 12V, D-Tap 2: Battery voltage Dimensions (inch): 82(W) x 142(H) x 12(D) Weight: 180g approx.
DC output: D-Tap 1: 8.4V, D-Tap 2: Battery voltage Dimensions (mm): 82.5(W) x 142(H) x 12(D) Weight: 180g approx.
Cable Output Voltage: 8.4V DC Maximum Cable Output:5A/42W D-Tap Output Voltage:12~16.8V DC Maximum D-Tap Output: 50W (each port) Dimensions: 82.5(W) x 142(H) x 12(D) mm Weight: 210 grams approx Included Accessories: M3 x 8 screws (qty. 4)
Material: 6061 Aluminum / Black anodized Screw Holes: (39) 1/4″,(3) 1/4″ with counter bores, (12) 3/8″ with counter bores Clamp Mounting: (6) Positions Compatible V-Mount Plates: P-V2 / P-VS2, P-V257/212/284, ET-PV2BMET-PV2UR, TA-PV2J650, TA-PV2USB, A-E2EOSC, AT-E2CMKII Dimensions: 98(W) x 141(H) x 20(D) mm Weight: 290g approx.
D-Tap Output Voltage: 12~16.8V DC Maximum D-Tap Output: 24W(2A) each Maximum Total Plate Output : 10A/120W Dimensions:97(W) x 143(H) x 27(D) mm Weight: 317 grams approx.
Maximum D-Tap Output: 4.16A/50W Maximum Total Output: 10A/120W Dimensions: 115(W) x 153(H) x 102-153(D) mm Weight: 520 grams approx.
Dimensions: 67(W) x 106(H) x 35(D) mm Weight: 280g approx.
Transmitter and Receiver Specifications Frequency: 5.190GHz – 5.795GHz Tuning Range / Frequency Selection: Four selectable channels or one auto select/DFS Select Transmit Power: 80mW maximum (TX only) Transmitter/Receiver Antenna: Internal 18dBi gain Transmit Method: MIMO Modulation: Orthogonal Frequency Diversity Multiplexing (OFDM) Latency: Less than 1ms Video Input: HD-SDI (SMPTE 292M) and SD-SDI (SMPTE 259M-C) Video...
Input Voltage: DC, 6.0V ~ DC 17.0V Power Consumption: 16W max. Brightness: 1450 lx @ 1m Dimmer Control: 100% ~ 0% Beam Angle: 45° spotlight 90° standard Battery Mount: sony L series (np-f) Colour Temperature: 4500K ‘Daylight’, 3200K with built-in filter Dimensions: 108(W) x 150(H) x 129(D) mm Weight: 470g approx. (excluding battery)
Frequency: US: 5190, 5230, 5270, 5310, 5510, 5550, 5670 MHz, EU: 5190, 5230, 5510, 5550, 5670 MHz Freq. Selection: Automatic / DFS Transmit Method: WHDI (MIMO) Encryption: WPA2-PSK (AES) Modulation: OFDM (Orthogonal Frequency Diversity Multiplexing) Latency: Zero frame (less than 1ms) Transmit Range: Up to 115m/380ft max (free-line-of-sight) Video/Audio: TX: (1) SDI In , (1)...
Battery Capacity: 7350mAh, 55Wh Max.Output Voltage: 8.4V DC Nominal Output Voltage: 7.4V DC X-Tap Connector: 6.0V-8.4V (3.3A/20W max. load) Maximum Discharge Current: 4.9A/59W Battery Protection: Over charge, Over discharge, Over current Dimensions: 70(W) x 43(H) x 80(D) mm Weight: 349 grams approx.
AC Adaptor input voltage: AC100 240V 50/60Hz Charger input voltage: 12~19V DC Charge current: 1.6A Compatible batteries: SSL-JVC50 Charging time: 230 mins approx. Dimensions: 140(W) x 46(H) x 129(D) mm Weight: 500g approx.
Here at DigiBroadcast, we’re proud to supply professional audio and video equipment from top manufacturers. Our quality batteries, adaptors, chargers, and transmission systems from IDX are reliable and durable, making them ideal for long and busy production shoots. Founded in Tokyo, IDX has manufactured batteries and a range of professional broadcasting equipment since 1989. The company introduced the world's first lithium ion battery in 1996 and it remains a highly-respected leader in the market.
Our range of low price batteries, adaptors, chargers, and transmitters from IDX features some of the best designs available, and you have a wide selection to choose from at DigiBroadcast.
The IDX wireless HD video transmission systems feature advanced beamforming technology which limits interference and gives a strong link, while our IDX 2XLR output camera adaptors are light and sturdy with automatic overload protection. Famous for its advance battery manufacturing, the IDX lithium ion rechargeable battery is another one of our top sellers and offers benefits, including high power capacity for increased running times. It’s built to comply with strict Japanese safety rules and it can also be taken with your carry-on baggage when flying.
With IDX’s cutting edge technology, reliable manufacturing and long-lasting processes, our range of IDX equipment suits a variety of broadcasting formats and durations.
We also stock a selection of other battery and power outlets for you to browse.
