Sony CAC-6 (CAC_6, CAC6, CAC/6, cac-6) Return Switch Remote for Studio Cameras
The CAC-6 return video selector allows you to remotely switch the camera on and off via the headphone microphone.
Power consumption: 8.5 W (HKCU-2005 only) Operating temperature: -10°C to +40°C (+14°F to +104°F) Dimensions (W x H x D) (excluding protrusions): DRX-8 board: 19 × 110 × 226 mm (3/4 × 4 3/8 × 8 7/8 inches) HIF-57 board: 19 × 98 × 159 mm (3/4 × 3 7/8 × 6 1/4 inches)" Mass:...
Compatibility: Compatible with Sony HSCU-300R/RF and HXCU-TX70
Compatibility: MVS-3000 switcher Connectors: RJ-45, 1000BaseT, USB type A, Device 1 to 4, 25-pin DVI-D output Operating Temperature: 41 to 104°F (5 to 40°C) Operating Humidity: 10 to 90% Storage Temperature: -4 to 140°F (-20 to 60°C) Power Requirements: 100 - 240 VAC, 10%, 50/60 Hz Current Consumption: Max 1.1 A Inrush Current: 40 A...
Compatible With: MVS-3000A Switcher Weight: 12 kg Minimum Inrush Current: 36 A peak, 8 A r.m.s. (240 V AC) Operating guaranteed temperature: +5 dC to +40 dC Performance guaranteed temperature: +10 °C to +35 °C Operating humidity: 10 % to 90 % Storage temperature: -20 °C to +60 °C Power requirements: AC 100 to 240...
Power: 12 VDC Power Consumption: 12 W, 1 A Dimensions: 16.69 x 1.81 x 8.66" (42.4 x 4.6 x 22.0 cm ) Weight: 5.07 lb (2.3 kg)
Compatibility: MVS-6520 switcher Connectors: RJ-45, 1000BaseT, USB type A, Device 1 to 4, 25-pin DVI-D output Operating Temperature: 41 to 104°F (5 to 40°C) Operating Humidity: 10 to 90% Storage Temperature: -4 to 140°F (-20 to 60°C) Power Requirements: 100 - 240 VAC, 10%, 50/60 Hz Current Consumption: Max 1.1 A Inrush Current: 44 A...
Compatibility: MVS-6530 switcher Connectors: RJ-45, 1000BaseT, USB type A, Device 1 to 4, 25-pin DVI-D output Operating Temperature: 41 to 104°F (5 to 40°C) Operating Humidity: 10 to 90% Storage Temperature: -4 to 140°F (-20 to 60°C) Power Requirements: 100 - 240 VAC, 10%, 50/60 Hz Current Consumption: Max 1.1 A Inrush Current: 46 A...
General Power requirement: DC 12V, Approx. 2.2A Dimensions (W x H x D): 362 × 43.5 × 206 mm (Approx.) Mass: Approx. 2.2 kg System Video format: 1080/59.94i Hz (60i), 1080/50i Hz (50i) Streaming Protocol: Mpeg-2 TS/UDP Recording Format: AVCHD, XAVC S *2 Media: Memory Stick ProDuo™, SDHC Video Switcher Function: Input :...
Control Connectors: RJ-45: 100Base-TX Standard, Tally: D-Sub 37-Pin (In/Out), RS-422A Compatible with these Models: MVS8000A, DVS9000, MFS2000 Operating Temperature: 41-104°F (5-40°C) Power Requirements: 100-240 VAC, 50/60 Hz Power Consumption: 0.5-0.7A Dimensions (WxHxD): 17.4 x 1.8 x 20.5 (44.4 x 4.4 x 52 cm) Weight: 18.7 lb (8.5 kg)
Power Requirement: 12 VDC Power Consumption: Maximum 50 W Frame Delay: 1080/59.94 Frame Synchronizer: 50i modes
Channel: 2 Compatible With: Sony's MVS-6500 Series
Controls: (32) Source-select buttons, (4) Re-entry buttons with single destination Dimensions: 1RU height
Power Requirement: 100-240V AC +/- 10% 50/60Hz Power Consumption: Max. 250W Dimensions (wxhxd, without projection): 482 x 132 x 520mm (19 x 5 1/4 x 20 1/2 inches) Mass: 18Kg (39lb 10oz) Operation Temperature: +5C to +40C (+41F to +104F) Relative Humidity: Up to 90% (non-condensing) Reference Input: BNC connector x 2, Loop-through, HD Tri-Level...
Inputs/Outputs: Tally/GPI: BNC (x54 Outputs)
Compatible with : MKS-8700 Control Chassis
Connections LAN: 1 x RJ45, 1000BASE-T (MVS LAN),1 x RJ45, 1000BASE-T (UTIL LAN) Tally: Serial: 2 x 9-Pin D-Sub, RS-422A TALLY/GPI: Inputs: 2 x 37-Pin D-Sub, TTL level inputs (34 each), Outputs: 2 x 37-Pin D-Sub, relay contact outputs (18 each) Remote: 6 x 9-Pin D-Sub, RS-422A, various protocols Bus: 1 x BNC, S-Bus protocol...
Power Consumption: 0.5 A (PoE+), 1.6 A DC Dimensions (W x H x D): 17 x 9 x 2" (424 x 221 x 46 mm)
Display: Single or dual names, up to 4 lines (16) characters, Source name, bus name, or attached macro name can be displayed LED Indicator: XPT Color Indicator: Source colors can be assigned to both XPT indicator and XPT buttons
Display: Single or dual names, up to 4 lines (16) characters, Source name, bus name, or attached macro name can be displayed LED Indicator: XPT Color Indicator: Source colors can be assigned to both XPT indicator and XPT buttons
