Features: Multi-functional controller to remote control camera, TLM-430 Look Back monitor & DN-60A CompactFlash card recorder Controls Camcorder Pause / Record / Zoom plus Record on Datavideo DN-60A Recorder Zoom Control with variable speed Controls switch to return feed input on Datavideo TLM-430 Look Back Monitor Mounts on to Tripod Arm Supports Sony LANC Control - suitable for many...
FEATURES: Two ear headset Circumaural / Closed cans to avoid sound leakage - in and out Ear pads are soft and comfortable for extended use Noise cancelling microphone Connection: x1 1/8" Audio/Microphone Connector Headphone Specifications: Transducer Principle: Dynamic Operating Principle: Closed Transmission Range: 10Hz-22KHz Nominal Impedance: 24 Ohms Nominal SPL at 1KHz: 98dB T.H.D.: <0.2%...
DATAVIDEO DATA-PD2A (DATAPD2A DATA PD 2 A DATA-PD-2-A) PD-2A High Power 1U Power Distribution System for Mobile Video Studio
DATAVIDEO DATA-PD4A (DATAPD4A DATA PD 4 A DATA/PD4A) PD-4A 1U Redundant Power Distribution System for Mobile Video Studio
Redundant Power Center
This unit has two AC inputs as well as a DC input, and can offer 4 12V 5Amp + 2 12V 10Amp DC outputs via XLR. The unit also features a built-in time delay power on control to initiate each DC output terminal in sequence, and installed with an auto-recover fuse in each input and output to protect everything connected.
DATAVIDEO DATA-CB47 (DATACB47 DATA CB47 DATA/CB47) All-in-One Cable (BNC and 5-pin XLR Intercom) - 50M
DATAVIDEO DATA-CB31 (DATACB31 DATA CB31 DATA/CB31) 50M All in One Video Cable Set
DATAVIDEO DATA-CB46 (DATACB46 DATA CB46 DATA/CB46) All-in-One Cable (BNC and 5-pin XLR Intercom) - 30M
Datavideo HDR-60 (HDR60, HDR 60) DATAVIDEO HDR-60 Desktop HD/SD-SDI Recorder - 0TB HD/SD Digital Video Recorder
The Datavideo HDR-60 is a hard drive based video recorder, with removable hard drive enclosure, designed for studio desktop applications.
The HDR-60 records from both High and Standard Definition video equipment via HD/SD-SDI. The HDR-60 comes with a removable hard drive enclosure. Additional enclosures are also available and the HDR-60 is compatible with SSD drives.
Once you have completed your recording, simply eject the hard drive enclosure and use USB 2.0 to connect to a PC or MAC based NLE system. The USB port provides power to the unit. It’s perfect for use with laptops in the field. You can work directly from the removable drive, or copy video files to your NLE’s video drives.
Very long recording times, very low cost media and up-to 125Mb/s 4:2:2 full HD recording. In a tough casing, it's a great, portable tapeless recorder for live events, video production and studio use. Plus, with system and data protection built-in, users can use the HDR-60 with confidence.
• SD/HD-SDI Input/Output + SD/HD-YUV & HDMI Output
• Balanced Audio I/O, Analogue 2Ch, AES/EBU-4Ch, SD/HD-SDI-4Ch, HDMI-4Ch
• Recording format MXF OP1A (.MOV Soon)
• 80-100Mbps 4:2:2 (120Mbps Long GOP Soon), I-Frame Only Recording (HD Only)
• Reference / TC Input
• RS-232/422 Control
Accidental Power-Off Protection - In the case of an accidental power-off, like a blackout, the recorded file will still be saved, minus 2 seconds at the end of the file.
NTFS - HDR-60 uses the NTFS file system.
On the Fly - Media files are made on the fly with the HDR-60.
Time Code - HDR-60 has time code input and output.
Gen-Lock - HDR-60 features gen-lock input and pass-through.
Locking Power Connector - Locking connectors keep the power plug securely attached.
Power-On Features - HDR-60 has Power-On Record and Power-On Play.
Timelapse Recording - HDR-60 is able to do timelapse recording.
Ref-In - HDR-60 has Ref-in/loop-through, Black Burst, and Tri-level Signal.
DATAVIDEO DATA-DDC4012H (DDC4012H, DDC 4012 H) In-Line XLR DC to DC 9-12v Converter
High Power Version : Supports 48v / for use with PD-6
9-30v XLR Input, Switchable 7.2/12v 2.1mm Locking Collar DC Output
DATAVIDEO DATA-NVW150 (DATANVW150, DAZA NVW 150) NVW-150 Wifi Bridging Unit
NVW-150 is very powerful minuture camera top Wifi transmitter, which can be powered by mains or a variety of battery solutions via a secure 2 pin Lemo connector. You can connect any network enabled device via ethernet to the NVW-150 which can then link to a second NVW-150 or NVW-250 unit via a long range, completely transparant WiFi connection (range approx 250m with supplied antenna, or much further with optional external antennas) The devices connected will assume you have a network cable attached.
The NVW-150 takes WiFi connectivity to the next level, designed to offer industry leading levels of performance and reliability without compromise. Utilising the very latest MIMO technology with a powerful 26dBm (aggregate) transmit power and carrier class receiver sensitivity means that the NVW-150 offers unrivalled range performance and stability even in the most challenging of environments.
The NVW-150s unique design allows it to be mounted to any cameras hot/cold shoe and powered from any DC source from 5 to 20 volts or passive power over Ethernet (9-24v). Each unit comes complete with two 3dBi omni-directional antennas ideal for use in short to medium range environments, externally mountable high gain antennas are available for longer range links. The devices legacy switched diversity mode even allows multiple antennas to be used to cover a larger geographical area with multiple directional antennas.
A built in LED signal strength indicator makes staying within range easy, while the unit will automatically adjust transmission rates and channel numbers based on current link conditions. In more challenging environments the devices comprehensive web interface offers a full site survey feature ensuring you always achieve the highest link standard possible.
The NVW-150 uses completely unlicensed 5Ghz bands and complies with IEEE802.11d global standards for licence free operation worldwide, offering transmission speeds of up to 300Mbps and ranges in excess of 0.25Km (standard antennae) / 10km (external antenna and height dependant) while staying below the UKs 30 dBm EIRP power limit.
The NVW-150 supports multiple operating modes, in addition to the standard point to point mode Point to multipoint mode allows you to connect multiple NVW-150 units together, you are not just limited to two units. If the distance between two units is just too much for the standard antennas and fixed external antennas are not practical the NVW-150 features a repeater mode allowing an additional unit to be installed in between to regenerate and repeat the signal. The unit can even act as a high powered wireless router, in this mode the Ethernet port becomes the WAN port.
Bridging, it’s like having wires just without the wires
The best possible WiFi Experience
Tx Power – Capable of transmitting at the UKs legal limit of 30dBi EIRP for band B WiFi without extremely high gain ultra-directional antennas.
Sensitivity – Range is about more than power, a sensitive receiver can pick up faint signals that poorer receivers would simply ignore. The NVW-150 features a carrier class -95dBm sensitivity.
2 x MIMO – Two antennas take full advantage of the multiple input multiple output technology offered by the latest 802.11n WiFi standard for increased throughput and lnk reliability as well as supporting switched diversity when operating in 802.11a mode.
5Ghz - 5Ghz WiFi offers many advantages over the more common 2.4Ghz flavour, these include; Better penetration, Better scatter, No abnormal absorption by water or damp, Larger number of non-overlapping channels which means less radio congestion, OFDM technology employed over the whole speed range (better for non-line of site operation) and a higher maximum legal transmit power
NVW-150 is WiFi on steroids. It far outstrips the power of most wireless technology in broadcast or standard IT equipment so where a reliable, long distance WiFi connection is essential, the tiny NVW-150 hits the mark.
DATAVIDEO DATA-AD200 (DATAAD200, DATA AD200, DATA/AD200, data-ad200) 6-Channel Audio Delay/Mixer with Level Adjustment
Datavideo DATA-MC2 (DATAMC2, DATA MC2, DATA/MC2, data-mc2) MC-2 Spare Gooseneck XLR Microphone for ITC-100
Datavideo DATA-NVS25 (DATANVS25, DATA NVS25, DATA/NVS25, data-nvs25) H.264 Video Streaming Server / Recorder
NVS-25 is a small, easy-to-use video streaming and recording appliance designed for professional video producers who need to simultaneously stream a live event and record the master quality version for post-event editing.
From any HDMI / SDI / CVBS input source such as a camera or switcher, NVS-25 generates an H.264-encoded stream compliant with RTSP / RTMP / HLS protocols.
While encoding the video for live streaming, NVS-25 can simultaneously records a MP4 or .TS file to a USB storage device.
NVS-25 is remotely controlled using Windows / Apple PC or mobile device with a web browser.
Flexible mechanism design for desktop application or 1U rack mount application.
Broadcast quality HD / SD H.264 network streaming
H.264 / AVC video CODEC, up to High Profile Level 4.0
Input source: NVS-25 can accept SDI / HDMI / CVBS source input
Supports de-interlace video streaming for progressive output
Front panel control for recording and streaming
Audio inputs: select embedded or external audio source
Network feature: DHCP Client, RTSP over TCP/UDP/HTTP with MPEG TS. RTMP, HLS protocols (unicast only)
Flexible video scaler presets for streaming out
Supports 3 types of GOP structure: IBBP, IPPP and IBP
Web UI for system configuration and FW upgrade
Attach USB storage device (Up to 1TB storage device)
Datavideo DATA-VP737 (DATAVP737, DATA VP737, DATA/VP737, data-vp737) Composite Signal Repeater
VP-737 is a composite video signal repeater which consists of a transmission and receiver unit.
VP-737 is able to extend composite video source signal up to 200 meters away over Cat5e (or better) cable. With no software configuration required, the installation and setup is quick and hassle-free.
Wired composite video transmission as far as 200 meters
Completely adaptive - quick, easy installation and setup, no configuration required
Cat5e extension design makes use of existing Cat 5e or better wiring infrastructures
Datavideo DATA-DVP100 (DATADVP100, DATA DVP100, DATA/DVP100, data-dvp100) dv Prompter Pro server
DVP-100 is a wireless teleprompting system compatible with Mac, PC, Android and IOS devices.
The dv Prompter Pro server creates its own WiFi hotspot ready for you to connect your devices and start prompting, once connected you can select if a device is to be a controller or a prompter screen and you can have an unlimited number of controllers or prompter screens.
The controller can create and load new scripts, control the scrolling and perform live edits on all prompter screens in real time.
All scripts are stored on the dvPrompter server not the devices themselves.
Multiple prompter screens kept in perfect sync
Remote control and scrip management over IP (WiFi/Ethernet)
IOS and Android Apps available
Compatible with any device that has an HTML5 compliant web browser
Embedded rich text editor
Control multiple prompters from one controller
Scripts are stored on the dv Prompter servers internal storage
Multiple users can collaborate to the scripts library over IP
Built in dual band WiFi
10/100Mbps Ethernet Port
Small form factor, rack mountable using RMK-2
12V DC input
Datavideo DATA-CB44 (DATACB44, DATA CB44, DATA/CB44, data-cb44) SDI Video, MCU, Intercom & Tally, Look Back and Power All-in-One Cable - 50M
* Coming Soon! *
50M SDI Video, MCU, Intercom & Tally, Look Back and Power All-in-One Cable
Designed for use with CCU-100
Includes HD-SDI, MCU Control Signal, Power, Look Back Video, Intercom and Tally
Features: 30M - HDMI Active Optical Cable Long distance transmission of up to 100 meters Support 4K@60Hz UHD display Supports HDMI 2.0 Supports HDCP 2.2 Plug and play, not driver dependent Thinner, lighter and softer than conventional copper cable EMI / RFI compliant No external power needed
Features: 50M - HDMI Active Optical Cable Long distance transmission of up to 100 meters Support 4K@60Hz UHD display Supports HDMI 2.0 Supports HDCP 2.2 Plug and play, not driver dependent Thinner, lighter and softer than conventional copper cable EMI / RFI compliant No external power needed
Features: 100M - HDMI Active Optical Cable Long distance transmission of up to 100 meters Support 4K@60Hz UHD display Supports HDMI 2.0 Supports HDCP 2.2 Plug and play, not driver dependent Thinner, lighter and softer than conventional copper cable EMI / RFI compliant No external power needed
HDBaseT Transmitter Transmit up to 4K video from HBT-10 Transmitter to HBT-11 Receiver Extend video transmission up to 100m from HBT-10 Transmitter to HBT-11 Receiver Transmit video, audio, DVIP Ethernet control, RS-422/232 and POE from a single Cat.5e/6/6a/7 cable PoE Power supply 48V input from HBT-11 Receiver 12V 30W DC output at HBT-10 Transmitter Supports...