10GBASE-SR SFP+ Transceiver for Sony Networked
Sony OTM-10GSR1 (OTM/10GSR1, OTM_10GSR1, OTM 10GSR1) 10GBASE-SR SFP+ Transceiver for Sony Networked The OTM-10GSR1 SFP+ Ethernet transceiver supports multi-mode optical fibre for up to 300m.
508645 EK 2000 IEM-AW-X Bodypack Receiver
Sennheiser 508645 (508-645, 508/645, 508 645) (EK-2000-IEM-AW-X, EK/2000/IEM/AW-/X) Bodypack Receiver This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
A 3700 Omnidirectional Antenna with Booster
Sennheiser 502195 (502-195, 502/195, 50-21-95, 502 195) (A-3700 , A/3700 , A3700) A 3700 Omnidirectional Antenna with Booster The SennheiserA 3700 Omnidirectional Antenna with Booster is an RF antenna for the Sennheiser EM3731, EM3732 and EM3732 Command receivers. The antenna significantly boosts RF strength and gain during long BNC cable runs. The A 3700 features up to 15dB of amplification.
A 5000-CP Passive Antenna for Wireless Microphones and Monitor Systems
Sennheiser 500887 (A/5000-CP, A/5000/CP, A5000CP, A 5000 CP) Passive Antenna for Wireless Microphones and Monitor Systems The A 5000-CP passive antenna provides an optimum solution for both transmitting and receiving RF signals throughout the UHF spectrum. Installations have demonstrated that the circular polarization of this antenna minimizes variations in signal strength and almost eliminates multipath problems, a primary cause of dropouts. The gain of this antenna over the entire UHF band is superior to common `off-the-shelf' antennas. The wideband design (450-960MHz) of the A 5000-CP allows it to accommodate antenna distribution systems for either wireless monitors or wireless microphones across multiple frequency ranges, offering maximum flexibility when designing complex RF systems.
AB 3700 Broadband Antenna Booster
Sennheiser 502196 (502-196, 502/196, 50-21-96, 502 196) (AB-3700, AB/3700, AB3700) AB 3700 Broadband Antenna Booster The Sennheiser AB 3700 Broadband Antenna Booster is an inline RF signal booster for the Sennheiser EM3731, EM3732 and EM3732 Command receivers. The antenna significantly boosts RF strength and gain during long BNC cable runs. The AB 3700 features up to 15dB of amplification and mounts to a standard 3/8" or 5/8" stud.
AD 3700 Active Directional Antenna
Sennheiser 502197 (502-197, 502/197, 50-21-97, 502 197) (AD3700, AD-3700, AD/3700) AD 3700 Active Directional Antenna The AD 3700 Active Directional Antenna from Sennheiser features an integrated AB 3700 booster, and has a front-to-back ratio of >= 14 dB. It can supply up to 15 dB of amplification, and is compatible with the EM 3731, EM 3732-II, and EM 2000 wireless receivers. It's powered from the connected receiver, via its BNC input.
AN-57/W Ground Plane Hall Broadcast Wireless Antenna
Sony AN-57/W (AN-57-W, AN/57/W, AN_57_W, AN57W, an-57/w) Ground Plane Hall Broadcast Wireless Antenna UHF Wireless Hall Broadcast Ground Plane Antenna. Collapsible design, non-directional so reception possible from any direction. Suitable for Hall and Broadcast applications.
AWM 4 SpeechLine Digital Wireless Wall-Mount 1.9 GHz Antenna with 4 Antennas
Sennheiser 507358 (507-358, 50-73-58, 507/358, 50 73 58) (AWM-4, AWM/4, AWM4) AWM 4 SpeechLine Digital Wireless Wall-Mount 1.9 GHz Antenna with 4 Antennas With the AWM 4, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall.
CineView 2 SDI 1500ft Wireless Video Transmission System - TX/RX
Accsoon ACSWIT08S (ACS-WIT08S, ACS/WIT08S, ACS WIT08S, ACS_WIT08S) CineView 2 SDI 1500ft Wireless Video Transmission System - TX/RX Unmatched Stability with Extended Range The CineView 2 is the latest innovation in Accsoon’s renowned CineView series, building on patented U.S. Dual-Band 2.4GHz + 5GHz technology. Featuring a brand-new antenna design, it delivers seamless 1080P 60fps video and audio transmission over an impressive 1500ft (450m) line-of-sight range, all while maintaining ultra-low latency under 50ms. Reliable Dual-Band Transmission with Enhanced Range Proven in the field, Accsoon’s Dual-Band transmission technology—now paired with a redesigned antenna—ensures unmatched stability, even across longer distances. Next-Gen Antenna Design for Superior Signal Strength Continuing to redefine wireless performance, the CineView 2’s upgraded antenna system outperforms the CineView SE and HE, pushing the range further to a remarkable 1500 feet with rock-solid reliability. Ultra-Compact and Lightweight With a sleek, compact form factor and weighing just 210g, the CineView 2 is easier to carry and quicker to rig—ideal for fast-paced production environments. Stream to Four Devices Simultaneously Each CineView 2 transmitter supports wireless video streaming to up to four devices—whether CineView receivers or smart devices (iOS and Android)—giving your crew full monitoring flexibility on set. Silent Operation for Quiet Shoots Designed without a fan, the CineView 2 offers silent operation while maintaining efficient heat dissipation—perfect for professional sets where quiet is critical. Seamless Compatibility with Existing CineView Models CineView 2 is fully backward compatible with CineView SE, HE, and Quad models, enabling users to mix and match systems as needed.
CineView 2 SDI RX 1500ft Wireless Video Transmission System
Accsoon ACSWIT08SRX (ACS-WIT08SRX, ACS/WIT08SRX, ACS WIT08SRX, ACS_WIT08SRX) CineView 2 SDI RX 1500ft Wireless Video Transmission System Exceptional Stability with Extended Range The CineView 2 is the latest evolution in Accsoon’s renowned CineView series. Building upon Accsoon’s patented Dual-Band 2.4GHz + 5GHz technology and incorporating a newly engineered antenna system, the CineView 2 delivers seamless 1080p 60fps video and audio transmission over an impressive 1500ft (450m) line-of-sight — all while maintaining ultra-low latency of under 50ms. Reliable Dual-Band Transmission Over Longer Distances Proven Wireless Stability Thanks to its refined Dual-Band connectivity and upgraded antenna design, the CineView 2 offers rock-solid performance, even at extended distances. Redesigned Antennas for Enhanced Signal Strength Accsoon continues to set the benchmark for wireless video transmission. The newly optimized antennas significantly improve signal strength and stability, outperforming previous models like the CineView SE and HE — now offering up to 1500 feet of transmission range. Compact, Lightweight, and Portable At just 210g, the CineView 2 is smaller and more portable than ever, making it quicker to rig and easier to transport — perfect for run-and-gun setups. Multi-Device Monitoring Made Easy Each CineView 2 transmitter can stream video to up to four devices simultaneously, including a mix of CineView RX units and mobile devices (iOS and Android), offering flexible monitoring options on set. Silent Operation for Professional Shoots Designed with passive cooling in mind, the CineView 2 eliminates fan noise, ensuring a silent shooting experience — ideal for film sets where audio integrity is critical. Cross-Compatible with the CineView Family The CineView 2 offers full backward compatibility with existing CineView SE, HE, and Quad models, enabling users to mix and match systems effortlessly based on their production needs.
CineView HE TX HDMI Wireless Video Transmitter
Accsoon ACSWIT04HETX (ACS-WIT04HETX, ACS/WIT04HETX, ACS WIT04HETX, ACS_WIT04HETX) CineView HE TX HDMI Wireless Video Transmitter The CineView SE is a wireless video transmitter and receiver, with new best in class latency at under 50ms, the CineView SE can transmit a video source via SDI & HDMI up to 1080p 60fps inputs/outputs. It transmits the signal on 2.4GHz+5GHz Dual-Band frequencies simultaneously for increased signal stability and sends video at an impressive maximum range of 1200ft line-of-sight. Market proved wireless stability The CineView SE utilizes dual-band transmission technology, which allows it to stream video via 2.4GHz and 5GHz Wi-Fi at the same time. The receiver can then intelligently identify interference and combine the two streams to form the complete audio and video stream. Superlow. Superfar The CineView SE is the most powerful model ever created for a faster, more responsive feel. Add to that a strong and powerful enough signal that can transmit up to 1200ft distance. Compact and lightweight. Easy to rig Rugged design with a 1.3-inch OLED display that fits in the palm of your hand. The solid aerospace-grade aluminum construction keeps the weight of the units down to a minimum. Lower power draw for longer shootings Choose between an NP-F style battery, a DC input port (7.4V~16.8V) as well as a USB-C power source (5V). Enjoy monitoring on up to 4 different devices Dedicated Receiver iPhone, iPad, Android phone and tablet iMac, Macbook(M1)
CineView M7 Pro 7inch 4K60 Wireless transmission Monitor
Accsoon ACSMIT01 (AC-SMIT01, AC/SMIT01, AC SMIT01, AC_SMIT01) CineView M7 Pro 7inch 4K60 Wireless transmission Monitor The Accsoon CineView M7 Pro is a rugged 7″ touchscreen smart monitor that combines full-featured HDMI/SDI monitoring and recording (up to 4K60 in H.264/H.265) with an integrated dual-band wireless TX/RX module supporting 350 m range and ~60 ms latency—everything powered by a robust Android-based platform with GPU and NPU acceleration. Featuring a sharp 1920 × 1200 Gorilla Glass Victus display with 100% Rec.709 coverage, 1000-nit brightness, and Delta E < 2 color accuracy, it also includes pro monitoring tools (False Color, Histogram, Zebras, Waveform, Vectorscope), LUT box functionality, cross-conversion, Wi‑Fi 6 with RTMP/SRT streaming, and flexible power via NP‑F, USB‑C PD, or DC input.
CineView Master 4K60 Wireless Video Transmission System - RX
Accsoon ACSWIT07RX (ACS-WIT07RX, ACS/WIT07RX, ACS WIT07RX, ACS_WIT07RX) CineView Master 4K60 Wireless Video Transmission System - RX (Receiver only) Experience high quality details with CineView Master 4K. From input to output, this fully end-to-end 4K60 solution offers stunning 4K resolution at a fluid 60 frames per second, perfect for monitoring, recording, live-streaming and any other video productions. Cutting-Edge Wireless Technology Pioneering Multi-Frequency Transmission Accsoon Tri-Band transmission technology is a quantum leap forward from the previous Dual-Band transmission technology. Based on the proprietary RTMS 4.0 protocol developed by Accsoon, it integrates 2.4GHz, 5GHz, and all-new 6GHz frequencies, enabling intelligent dynamic adjustment of audio and video data across three bands, promising greater robustness, faster connection times, lower latency, and the ability to gracefully manage multiple connections. Accsoon Tri-Band Transmission vs. SDR Greater interference resistance Wider bandwidth Better transmission efficiency 25 ms Best in Class Latency Follow the Moment, Focus the Frame Accsoon CineView Master 4K significantly reduces latency from input to output to only 25ms. This near real-time performance is notably faster and directly addresses the demands of cinematographers, camera operators and assistants, ensuring precision and efficiency in fast-paced filming environments, enhancing overall productivity in professional filmmaking. Maximized Creative Range Within Reach Accsoon CineView Master 4K with its original revolutionary Tri-band transmission technology and innovative hardware design, achieves an impressive 2.5 km ultra-long transmission distance. Distance is no barrier to the CineView Masrer 4K. Not only does it work over vast distances, it does so with incredible stability, pushing the limits to make it the highest performing Accsoon system to date. Direct On-camera Video Output to Your iPhone/iPad Superb Image Quality Resolution Up to 4K60 Apple Standard Display iPhone and iPad displays have been designed, tested, and manufactured for Apple quality and performance standards. Charge Your iOS Device Charge the connected iPhone or iPad at the same time over Lightning or USB-C. Wired Connection Without Latency Create smoothly and seamlessly, with every detail in real time. Camera to Cloud Easily share your creations to Frame.io through the C2C integration, enabling real-time automatic uploads from almost any camera to the cloud. Compatible with: iPhone/iPad equipped with Apple A14 proccesor and above [3] Versatile Wireless Connections for Any Production Crew CineView Master 4K Receiver Delivers stable, high-quality video transmission for sharp and smooth on-site monitoring. Wireless Monitoring Made Easy with Accsoon SEE App Adapts to versatile shooting needs, stays flexible and efficient even during fast movements. Empowered 8K Processor Wireless Optimized to Perfection Accsoon developed the proprietary RTMS 4.0 protocol to work with the new High-Performance A/V Processor with 8K capabilities. In combination the protocol and the processor represent a remarkable 400% increase in processing capabilities. Driving even greater performance for synchronized multi-video streams, the processor can effortlessly manage Tri-Band multi-stream video transmission even under the most demanding conditions. Measured when shooting 1080p/60fps video under low bitrate. Measured when shooting 1080p/60fps video under low bitrate with FCC compliance in an unobstructed, interference-free environment. iPhone 12 above and later; iPad Pro 12.9-inch Gen 3 above and later; iPad Pro 11-inch Gen 3 above and later; iPad Gen 9 above and later; iPad Air Gen 4 above and later; iPad mini 6. Requires separate purchase.
CineView SE SDI and HDMI Wireless Video Transmitter and Receiver
Accsoon ACSWIT04SE (ACS-WIT04SE, ACS/WIT04SE, ACS WIT04SE, ACS_WIT04SE) CineView SE SDI and HDMI Wireless Video Transmitter and Receiver The CineView SE is a wireless video transmitter and receiver, with new best in class latency at under 50ms, the CineView SE can transmit a video source via SDI & HDMI up to 1080p 60fps inputs/outputs. It transmits the signal on 2.4GHz+5GHz Dual-Band frequencies simultaneously for increased signal stability and sends video at an impressive maximum range of 1200ft line-of-sight. Market proved wireless stability The CineView SE utilizes dual-band transmission technology, which allows it to stream video via 2.4GHz and 5GHz Wi-Fi at the same time. The receiver can then intelligently identify interference and combine the two streams to form the complete audio and video stream. Superlow. Superfar The CineView SE is the most powerful model ever created for a faster, more responsive feel. Add to that a strong and powerful enough signal that can transmit up to 1200ft distance. Compact and lightweight. Easy to rig Rugged design with a 1.3-inch OLED display that fits in the palm of your hand. The solid aerospace-grade aluminium construction keeps the weight of the units down to a minimum. Lower power draw for longer shootings Choose between an NP-F style battery, a DC input port (7.4V~16.8V) as well as a USB-C power source (5V). Enjoy monitoring on up to 4 different devices. Dedicated Receiver iPhone, iPad, Android phone and tablet iMac, Macbook(M1)
CineView SE TX SDI and HDMI Wireless Video Transmitter
Accsoon ACSWIT04SETX (ACS-WIT04SETX, ACS/WIT04SETX, ACS WIT04SETX, ACS_WIT04SETX) CineView SE TX SDI and HDMI Wireless Video Transmitter The CineView SE is a wireless video transmitter and receiver, with new best in class latency at under 50ms, the CineView SE can transmit a video source via SDI & HDMI up to 1080p 60fps inputs/outputs. It transmits the signal on 2.4GHz+5GHz Dual-Band frequencies simultaneously for increased signal stability and sends video at an impressive maximum range of 1200ft line-of-sight. Market proved wireless stability The CineView SE utilizes dual-band transmission technology, which allows it to stream video via 2.4GHz and 5GHz Wi-Fi at the same time. The receiver can then intelligently identify interference and combine the two streams to form the complete audio and video stream. Superlow. Superfar The CineView SE is the most powerful model ever created for a faster, more responsive feel. Add to that a strong and powerful enough signal that can transmit up to 1200ft distance. Compact and lightweight. Easy to rig Rugged design with a 1.3-inch OLED display that fits in the palm of your hand. The solid aerospace-grade aluminium construction keeps the weight of the units down to a minimum. Lower power draw for longer shootings Choose between an NP-F style battery, a DC input port (7.4V~16.8V) as well as a USB-C power source (5V). Enjoy monitoring on up to 4 different devices. Dedicated Receiver iPhone, iPad, Android phone and tablet iMac, Macbook(M1)
CoMo SE 2.4GHz Full-duplex Wireless Intercom System - 1 Host 2 Remote
Accsoon ACSMIC031H2R (ACS-MIC031H2R, ACS/MIC031H2R, ACS MIC031H2R, ACS_MIC031H2R) CoMo SE 2.4GHz Full-duplex Wireless Intercom System - 1 Host 2 Remote The Accsoon CoMo SE is a 2.4GHz full-duplex wireless intercom system, engineered for seamless communication with a range of up to 1312ft(400m). It supports up to 5 users to communicate together, ensuring reliable and efficient coordination in diverse applications. With the advanced ENC(Environment Noise Cancellation) and 30+ hours of noise-free communication, Accsoon CoMo SE is professional in dependable, long-lasting performance. Up to 400m Transmission Range No Limitation in Communication Accsoon CoMo SE boasts an impressive transmission range of up to 400 meters, ensuring reliable connectivity even over extended distance. This extended range capability makes it ideal for various applications where maintaining strong, consistent signals is critical, offering users the flexibility and confidence to operate efficiently within a broad area. External Antenna Design for Wireless Stability With external antenna design, the Accsoon CoMo SE maintains an operational range of up to 1312ft/400m in a dependable connection between host and remote headsets. Exceptional Battery Life up to 30+ Hours The Accsoon CoMo SE offers an exceptional battery life of over 30 hours, ensuring long-lasting performance for extended use without frequent recharging, providing users with the convenience and reliability needed for continuous operation. Environment Noise Cancellation for Voice Clarity The Accsoon CoMo SE features advanced ENC (Environment Noise Cancellation) technology, effectively reducing background noise to deliver crystal-clear audio quality. This cutting-edge noise cancellation ensures that your communication remains uninterrupted and focused, even in noisy environments.
CoMo Wireless Intercom System - 1 Host 4 Remote
Accsoon ACSMIC021H4R (AC-SMIC021H4R, AC/SMIC021H4R, AC_SMIC021H4R, AC SMIC021H4R) CoMo Wireless Intercom System - 1 Host 4 Remote The Accsoon CoMo is a headset-based full-duplex 1.9GHz wireless intercom system with 1312ft (400m) range, allowing up to 9 users to work and communicate together. With the all-new product design and enhancement from dual-mic ENC, Accsoon CoMo provides over 10+ hours of noise-free communication experience. Industry-leading Wireless Stability and Ultra Long Transmission Range Accsoon is bringing its industry-leading wireless stability to its first wireless intercom system. 400m/1312ft The external antenna design allows the Accsoon CoMo to keep a reliable connection between host and remote headsets and an operating range of up to 400m/1312ft. Dual-Mic Environment Noise Cancellation for Voice Clarity Dual-mic is combined with advanced Environment Noise Cancellation (ENC) which detects ambient sounds and reduces it, leaving speech much clearer and more comprehensible. Ergonomic Design For All-Day Wearing Accsoon is designed with a wide range of physical adjustment for differing head sizes. Worn on both left and right. Zero Sound-leakage Allowing for easy operation and no interruption when shooting in quiet environments.
CoMo Wireless Intercom System - 1 Host 8 Remote
Accsoon ACSMIC021H8R (AC-SMIC021H8R, AC/SMIC021H8R, AC_SMIC021H8R, AC SMIC021H8R) CoMo Wireless Intercom System - 1 Host 8 Remote The Accsoon CoMo is a headset-based full-duplex 1.9GHz wireless intercom system with 1312ft (400m) range, allowing up to 9 users to work and communicate together. With the all-new product design and enhancement from dual-mic ENC, Accsoon CoMo provides over 10+ hours of noise-free communication experience. Industry-leading Wireless Stability and Ultra Long Transmission Range Accsoon is bringing its industry-leading wireless stability to its first wireless intercom system. 400m/1312ft The external antenna design allows the Accsoon CoMo to keep a reliable connection between host and remote headsets and an operating range of up to 400m/1312ft. Dual-Mic Environment Noise Cancellation for Voice Clarity Dual-mic is combined with advanced Environment Noise Cancellation (ENC) which detects ambient sounds and reduces it, leaving speech much clearer and more comprehensible. Ergonomic Design For All-Day Wearing Accsoon is designed with a wide range of physical adjustment for differing head sizes. Worn on both left and right. Zero Sound-leakage Allowing for easy operation and no interruption when shooting in quiet environments. Links up to 9 (1 Host and 8 Remote) Accsoon CoMo is so versatile that can link up to 9 users to work and communicate together.
CoMo Wireless Intercom System - Host
Accsoon ACSMIC02H (AC-SMIC02H, AC/SMIC02H, AC SMIC02H, AC_SMIC02H) CoMo Wireless Intercom System - Host The Accsoon CoMo is a headset-based full-duplex 1.9GHz wireless intercom system with 1312ft (400m) range, allowing up to 9 users to work and communicate together. With the all-new product design and enhancement from dual-mic ENC, Accsoon CoMo provides over 10+ hours of noise-free communication experience. Industry-leading Wireless Stability and Ultra Long Transmission Range Accsoon is bringing its industry-leading wireless stability to its first wireless intercom system. 400m/1312ft The external antenna design allows the Accsoon CoMo to keep a reliable connection between host and remote headsets and an operating range of up to 400m/1312ft. Dual-Mic Environment Noise Cancellation for Voice Clarity Dual-mic is combined with advanced Environment Noise Cancellation (ENC) which detects ambient sounds and reduces it, leaving speech much clearer and more comprehensible. Ergonomic Design For All-Day Wearing Accsoon is designed with a wide range of physical adjustment for differing head sizes. Worn on both left and right. Zero Sound-leakage Allowing for easy operation and no interruption when shooting in quiet environments. Links up to 9 (1 Host and 8 Remote) Accsoon CoMo is so versatile that can link up to 9 users to work and communicate together.
CP.RN.00000180.01 Video Transmitter
DJI CP.RN.00000180.01 (CP-RN-00000180-01, CP/RN/00000180/01, CPRN0000018001, CP RN 00000180 01) Video Transmitter DJI Transmission evolves from the established DJI aerial video transmission technology, delivering an integrated solution that combines a video receiver, monitor, controller, and recorder. It is designed for native integration with Ronin-series products and DJI Master Wheels, transforming the industry with a groundbreaking transmission experience that provides vision beyond boundaries. Long-Distance HD Live Feed DJI Transmission incorporates O3 Pro video transmission technology, which offers an incredible 6km/20,000ft [1] on-ground transmission distance. It also supports transmission at 1080p/60fps with a max bitrate of 40Mbps as well as live audio monitoring at 16-bit 48 kHz, providing crews on large sets with an excellent remote visual and audio monitoring experience. End-to-End Ultra-Low Latency The video transmitter and receiver use the same chip solution as Ronin 4D, with every link explicitly optimized to provide end-to-end ultra-low transmission latency when pairing with cinema cameras like ALEXA Mini LF. Seamless Auto Frequency Hopping O3 Pro adds DFS bands* on top of the traditional 2.4 GHz and 5.8 GHz frequency bands, offering up to 23 channel options that provide professional crews with more compliant and interference-free transmission channels. In addition, DJI Transmission supports triple-band automatic frequency hopping, which automatically scans the electromagnetic environment for the best wireless channel. With a built-in frequency sweeper, users can even manually select the optimal channel to avoid interference between devices. By mounting high-gain antennas, transmission capability is further boosted. One Transmitter with Multiple Receivers The High-Bright Remote Monitor supports one transmitter with multiple receivers for video and audio feeds in two transmission modes. In Control mode, DJI Transmission delivers optimal transmission performance. Monitoring can be done from two receivers at the same time, while Ronin 2, RS 3 Pro, and camera focus can all be controlled remotely. Meanwhile, for crews operating with multiple members and teams, such as lighting, art department, and props, Broadcast mode can also be enabled to allow an unlimited number of receivers (transmission performance differs with Broadcast mode enabled). This brings shooting efficiency and awareness to an entirely new level. Encrypted Transmission DJI Transmission supports secure pairing and AES 256-bit encryption to protect against unauthorized access to your information. Together with DJI's self-developed chip and transmission protocol, DJI Transmission is able to ensure the highest level of security for your footage. Integrated Design Integrated Design Compared with conventional solutions, DJI Transmission integrates a high-bright monitor with a built-in receiver, providing optimum portability and efficient setup to help you get started fast in any setting. The remote monitor comes with a built-in image processing chip that is the same as the one used on Ronin 4D. This allows it to offer many features in addition to monitoring for integrated and efficient receiving, monitoring, control, and recording. Wide-Gamut Touchscreen Wide-Gamut Touchscreen The High-Bright Remote Monitor is equipped with a 7-inch wide-gamut touchscreen with a brightness of up to 1,500 nits. It comes standard with a tempered glass screen protector and professional monitor hood to deliver rich, true-to-life colors, even in strong lighting conditions. With a 1920×1200 resolution, the screen displays a non-intrusive interface (OSD), with visible details like shooting parameters to ensure easily accessible information and seamless monitoring. Supportive Tools The remote monitor comes with supportive tools like safe zone, frame guide, zebra stripes, false color, peaking, and waveform for precise composition, exposure, and focusing. Independent Recording and Playback The remote monitor features a microSD card slot and allows for independent recording and storage of up to 1080p/60fps H.264 live feed. The remote monitor can automatically start and stop recording in synchronization with the camera, as well as simultaneously access video timecodes, making it easy to edit proxies right on set. When several remote monitors are used in conjunction, each monitor can even record or playback footage independently without interfering with other monitors. Built-In Motion Controller The High-Bright Remote Monitor has a built-in gyroscopic sensor that enables it to act as a standalone motion controller for Ronin 2 or RS 3 Pro without the need for additional accessories. This allows users to achieve more complex camera movements from a moving vehicle or with a jib. Compatible with Ronin 4D Hand Grips The High-Bright Remote Monitor comes with an expansion-protective frame. When using with Ronin 4D Hand Grips, [2] the joystick can control the Ronin 2 or RS 3 Pro gimbal, and the focus wheel can control focusing and the adjustment of camera parameters like aperture, shutter, and ISO, while the record button controls start/stop of recording, making the RS 3 Pro user experience similar to that of Ronin 4D. Compatible with DJI Master Wheels and DJI Force Pro When used with the DJI Master Wheels or DJI Force Pro, the remote monitor allows users to achieve more advanced gimbal control when using Ronin 2 or RS 3 Pro. In this scenario, the original equipment will transmit control signals directly through DJI Transmission, no longer utilizing the wireless signals from DJI Master Wheels or DJI Force Pro. This boosts the transmission performance by three times and enhances signal range, stability, and anti-interference capabilities. Mirror Control Mode When RS 3 Pro is mounted to jibs, cable cams, and vehicles, with Mirror Control mode, you can remotely control the menu of Sony mirrorless cameras from anywhere on set.
Datavideo (DATA-HBT11, DATAHBT11, DATA HBT11) The HBT-10 HDBaseT transmitter and HBT-11 receiver provide a maximum transmission distance of 100 meters. The pair supports video transmission up to 4K resolutions over Ethernet. With a 48V power source connected to the HBT-11 HDBaseT receiver, the HBT-11 can also remotely power the transmitter using Power over Ethernet (PoE). The HBT-10 transmitter can power external devices from the 12V/30W DC output. DVIP control can be achieved over the same Ethernet cable. In other words, HDMI video, DVIP control signals and Power over Ethernet (PoE) can be transmitted between the transmitter and the receiver using a single Ethernet cable.
Datavideo 3 Channel 4K HDBaseT Receiver Box
Datavideo 3 Channel 4K HDBaseT Receiver Box(DATA-HBT-30) This 3-Channel DataVideo Long-Range HDBaseT Receiver supplies power, Ultra HD 4K50/60 video, and camera control to up to 3 devices up to 328' distance. It simultaneously outputs HDMI, RS-422, and IP control signals. Seamlessly add HDBaseT to your Workflow HBT-30 can power PTZ video cameras via PoE, transmit signals over a single ethernet cable to and from the camera, and can be used to remotely control various camera parameters such as iris, presets, etc. Most importantly, it can output 4K HDMI signals to your switcher. Integrate Camera Control, Switcher, and Recorder Operations HBT-30 transmits 4K HDMI signals as well as camera control. With the HBT-30, the system can be integrated as a camera controller, video switcher, and ISO recorder. Remote Control Remote control of camera functions via RS-422 or DVIP with up to 3 cameras simultaneously up to 328'. HDBaseT HDBaseT allows you to transmit video, control, tally, and power over a single Cat 6 cable. This means you no longer need to run multiple cables for your cameras.
Datavideo HBT-5 HDBaseT Transmitter Box
Datavideo HBT-5 HDBaseT Transmitter Box(DATA-HBT5) Supports HDMI Deep Color & full 3D & 4K@30 HDMI Deep Color supports better color depths. To giving your display device a great image. Transmits HDMI signals up to 60m at 1080p and 35m at 4K@30 using Cat 6 cable The extender supports Ultra HD and Full HD resolution and the accompanying digital audio. Receiver can be powered directly by a power supply, or by Power over Ethernet from the transmitter HBT-5 transmitter can be powered by the same single power source using Power-over-Ethernet (PoE), easy to install for various applications. Support 12V power out for remotely located equipment. Receiver can be powered directly by a power supply, or by Power over Ethernet from the transmitter HDCP compliant Can perfectly display the video source with HDCP in high clarity with zero interruption. Supports control over RS-232/ RS-422 HBT-5 offers RS-232/RS-422 control signals, which allow to control the source device from the display location. Supports control over RS-232/ RS-422 Supports default EDID and EDID learning from the display EDID pass-through passes signal between the source and display Dolby TrueHD & DTS Master audio support Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
Digital Wireless Bodypack Transmitter
Sony ZTX-B02RC (ZTX/B02RC, ZTX_B02RC, ZTX B02RC) Digital Wireless Bodypack Transmitter The ZTX-B02RC Digital Wireless Bodypack Transmitter from Sony is a bodypack transmitter designed to work with the DWZ wireless systems. It is capable of transmitting 24-bit linear PCM digital data with 128-bit encryption for secure use. It has two RF transmission modes to select from, wide band hopping and narrow band hopping, allowing you to choose the mode that will provide the least amount of interference based upon the RF environment you are in.
Digital Wireless Receiver EU Version
Sony ZRX-HR50//EU8 (ZRX/HR50//EU8, ZRX_HR50//EU8, ZRX HR50//EU8) Digital Wireless Receiver EU Version The ZRX-HR50 Digital Wireless Half-Rack Receiver from Sony is designed to be used in DWZ digital wireless systems. It features Sony's Clear Channel Scan and Best Channel Selection that scan available frequencies and tunes itself to clearest channel for quick setup. It has two RF modes to select from, wide band hopping and narrow band hopping, allowing you to choose the mode that will provide the least amount of interference based upon the RF environment you are in. The ZRX-HR50 has a front-panel color LCD that provides a readout of your selected channel, audio level, and transmitter battery life. The rotary encoder allows you to make adjustments to the system, including the 5-band equalizer. The unit has a balanced XLR output that you can assign to mic or line level in additional to an unbalanced 1/4" out. A second 1/4" tuner output allows you to integrate the ZRX-HR50 into a wireless instrument system.
DJI Transmission (High-Bright Monitor Combo)
DJI Transmission (High-Bright Monitor Combo)(CP.RN.00000209.01) DJI Transmission evolves from the established DJI aerial video transmission technology, delivering an integrated solution that combines a video receiver, monitor, controller, and recorder. It is designed for native integration with Ronin-series products and DJI Master Wheels, transforming the industry with a groundbreaking transmission experience that provides vision beyond boundaries. Long-Distance HD Live Feed DJI Transmission incorporates O3 Pro video transmission technology, which offers an incredible 6km/20,000ft [1] on-ground transmission distance. It also supports transmission at 1080p/60fps with a max bitrate of 50Mbps as well as live audio monitoring at 6-bit 48 kHz, providing crews on large sets with an excellent remote visual and audio monitoring experience. End-to-End Ultra-Low Latency The video transmitter and receiver use the same chip solution as Ronin 4D, with every link explicitly optimized to provide end-to-end ultra-low transmission latency when pairing with cinema cameras like ALEXA Mini LF. Seamless Auto Frequency Hopping O3 Pro adds DFS bands on top of the traditional 2.4 GHz and 5.8 GHz frequency bands, offering up to 23 channel options that provide professional crews with more compliant and interference-free transmission channels. In addition, DJI Transmission supports triple-band automatic frequency hopping, which automatically scans the electromagnetic environment for the best wireless channel. One Transmitter with Multiple Receivers The High-Bright Remote Monitor supports one transmitter with multiple receivers for video and audio feeds in two transmission modes. In Control mode, DJI Transmission delivers optimal transmission performance. Monitoring can be done from two receivers at the same time, while Ronin 2, RS 3 Pro, and camera focus can all be controlled remotely. For crews operating with multiple members and teams, such as lighting, art department, and props, Broadcast mode can be enabled on top of Control mode to allow an unlimited number of receivers (transmission performance differs from Control mode). This brings shooting efficiency and awareness to an entirely new level. In dynamic, multi-team environments such as reality television sets, DJI’s unique transmission protocol can make better use of wireless channels. With DFS bands and seamless automatic frequency hopping technology, DJI Transmission can operate with 20 or more transmitters sending signals to 20 or more monitors simultaneously. This results in a smooth, coordinated experience that's difficult to achieve with traditional transmission setups.
DJI wireless Video Receiver(CP.RN.00000319.01) The DJITM Video Receiver features DJI O3 Pro video transmission and receives video signals from the transmitter. In an environment without interference or obstruction, the video receiver provides video transmission with a maximum transmission range of 6 km*, a bitrate of up to 40 Mbps, and a minimum end-to-end latency of 70 ms. It supports multiple frequency bands in both Control and Broadcast modes and simultaneously outputs multiple video signals to display devices for remote monitoring. When used with the DJI Video Transmitter or DJI Ronin 4D, the video receiver can meet the filming requirements of mediums such as movies, TV series, advertisements, and documentaries.
Dual Channel Digital Wireless Receiver
Sony DWR-S02D/42 (DWRS02D42, DWR S02D 42, DWR/S02D42) Dual Channel Digital Wireless Receiver The Sony DWRS02D/42 Dual Channel Digital Wireless Receiver is a digital dual-channel slot-in receiver. It operates within a 60 MHz range, from 638 to 698 MHz. The slot-in receiver can be mounted directly onto Sony digital slot-in compatible camcorders; the receiver then facilitates 2-channel wireless operation with unique wireless remote control of the digital wireless system from the camera viewfinder. It can also be mounted on existing cameras (or operated in a mixer bag) using the DWA-01D or DWA-F01D adapters, providing either AES3 digital audio or analog audio output. To assist in the wireless system set-up, the receiver includes both clear channel and active channel scan functions. Mounts directly onto HDW-650F, PDW-700/F800, PWM-500, and PMW-350/320/TD300 camcorder slots Supports 2 channel AES3 or analog output Includes clear channel and active channel scanning modes Innovative wireless remote control of the transmitter from the receiver (using 2.4 GHz IEEE802.15.4 communication technology) UHF-TV channels 42 to 51 (638 to 698 MHz)
DWA-F01D Digital Wireless Adaptor for DWX System
Sony DWA-F01D (DWA/F01D, DWA_F01D, DWAF01D, DWA F01D, dwa-f01d) Digital Wireless Adaptor for DWX System The DWA-F01D is an expandable adaptor for digital wireless receiver, designed to fit in mixer bags for ENG / EFP applications requiring top panel operation and the option of stand-alone battery power. The DWA-F01D can be used as a two-channel digital receiver with the DWR-S01D, and as a one-channel analogue receiver with the WRR-855S. The unit is also able to offer DWX digital audio for camcorders that do not feature an integral slot-in feature. The DWA-F01D can be used as a stand-alone two-channel digital receiver with the DWR-S01D, DWR-S02D or DWR-S02DN, and as a stand-alone one-channel analog receiver with the WRR-855S. Three-way parallel audio outputs allow sound engineers to flexibly manage everything on-site. There is XLR analogue output for use with portable audio mixers or camcorders, BNC Digital (AES3id) output for use with portable audio recorders with AES3id digital inputs or long-distance AES3id transmission, and mini-phone analogue output for use with PCM recorders and DSLRs. Simultaneous outputs enable easy, convenient and redundant work-flow, for example, using the XLR for mixing, AES3id for multi-track recording, and mini-phone for back up. (The mini-phone jack is selectable for headphones monitoring or mic level output.) Three-way powering allows sound engineers to adapt to any situation on-site. Choose an optional InfoLITHIUM L battery for stand-alone use. Choose Hirose 4-pin DC input for camera-mount operation, with DC supplied from a camera battery. For mixer-bag use with battery systems, centralized management can be achieved using the Hirose 4-pin or BP jack. For AC powering, you can use an InfoLITHIUM battery charger as an AC adapter, or use a conventional AC adaptor with the BP jack.
DWR-S02DN/21 Digital Wireless Receiver
Sony DWR-S02DN/21 (DWR-S02DN-21, DWRS02DN21, DWR_S02DN_21, dwr-s02dn-21) Digital Wireless Receiver The DWR-S02DN is a two-channel portable slot-in receiver for Sony camcorders that, as part of the DWX N series digital wireless microphone system, works seamlessly with Sony digital wireless transmitters, such as the DWT-B01N, DWT-P01N and digital wireless microphones, such as the DWM-02N. The receiver operates with a wide bandwidth up to 72 MHz bandwidth (depending on region), giving users a higher probability of finding unoccupied frequencies in congested metropolitan areas. Ideal for a range of applications including live concert, theatre, opera, broadcast studio, news gathering, field production, and sound recording, the DWR-S02DN offers a truly digital wireless microphone platform. It combines advanced digital technologies, analogue microphone expertise, wireless audio transmission technologies, and an enviable reputation for stability. Three codec modes designed for wide variety of applications MODE1 for compatibility with DWX series applications, MODE2 with higher quality sound and low latency ideal for theatre, tour and broadcast applications, and MODE3 with more reliable RF transmission ideal for speech applications. Low audio latency and high quality sound MODE2 provides higher quality sound with a 96kHz sampling rate and very low audio latency of 1.5 msec. More reliable RF transmissions expands the operation range MODE3 operation optimised for reliable transmission by preventing drop out by interference with additional error correction. Compatibility with DWX series MODE1 operation provides the same high quality, reliability and audio latency as the previous DWX series version. Wide frequency coverage with choice of channels available The extra wide switching bandwidth covers a wide area, with a wide choice of channels available across multiple models—please refer to product specifications for more information. 14UC: 470.125 MHz to 541.875 MHz (UHF-TV channels 14 to 25) 30A UC: 566.125 MHz to 607.875 MHz (UHF-TV channels 30 to 36), 25 kHz steps 42LA: 638.125 MHz to 697.875 MHz (UHF-TV channels 42 to 51), 25 kHz steps
DWR-S02DN/42 Dual Channel Digital Wireless Receiver
Sony DWR-S02DN/42 (DWR-S02DN-42, DWR_S02DN_42, DWRS02DN42, DWR S02DN 42, dwr-s02dn/42) Dual Channel Digital Wireless Receiver The DWR-S02DN is a two-channel portable slot-in receiver for Sony camcorders that, as part of the DWX N series digital wireless microphone system, works seamlessly with Sony digital wireless transmitters, such as the DWT-B01N, DWT-P01N and digital wireless microphones, such as the DWM-02N. The receiver operates with a wide bandwidth up to 72 MHz bandwidth (depending on region), giving users a higher probability of finding unoccupied frequencies in congested metropolitan areas. Ideal for a range of applications including live concert, theatre, opera, broadcast studio, news gathering, field production, and sound recording, the DWR-S02DN offers a truly digital wireless microphone platform. It combines advanced digital technologies, analogue microphone expertise, wireless audio transmission technologies, and an enviable reputation for stability. Three codec modes designed for wide variety of applications MODE1 for compatibility with DWX series applications, MODE2 with higher quality sound and low latency ideal for theatre, tour and broadcast applications, and MODE3 with more reliable RF transmission ideal for speech applications. Low audio latency and high quality sound MODE2 provides higher quality sound with a 96kHz sampling rate and very low audio latency of 1.5 msec. More reliable RF transmissions expands the operation range MODE3 operation optimised for reliable transmission by preventing drop out by interference with additional error correction. Compatibility with DWX series MODE1 operation provides the same high quality, reliability and audio latency as the previous DWX series version. Wide frequency coverage with choice of channels available The extra wide switching bandwidth covers a wide area, with a wide choice of channels available across multiple models—please refer to product specifications for more information. 14UC: 470.125 MHz to 541.875 MHz (UHF-TV channels 14 to 25) 30A UC: 566.125 MHz to 607.875 MHz (UHF-TV channels 30 to 36), 25 kHz steps 42LA: 638.125 MHz to 697.875 MHz (UHF-TV channels 42 to 51), 25 kHz steps
DWR-S03D-H DWX Gen3 2-Channel Digital Wireless Slot-In Receiver
Sony DWR-S03D-H (DWR-S03D/H, DWR_S03D_H, DWRS03DH, DWR-S03D_H, DWR/S03D/H, dwr-s03d/h) DWX Gen3 2-Channel Digital Wireless Slot-In Receiver This high performance 2-channel portable slot-in receiver is an ideal choice for ENG/EFP and location sound applications. The DWR-S03D is part of Sony's third generation DWX series digital wireless microphone system that combines advanced digital technologies, analogue microphone expertise, wireless audio transmission technologies and an enviable reputation for stability. The receiver operates with a wide bandwidth up to 148 MHz (depending on region), increasing the probability of finding unoccupied frequencies in congested metropolitan areas. Light and compact, the DWR-S03D can be mounted in the slot of Sony or other professional camcorders using the optional DWA-SLAS1 or DWA-SLAU1 interface adaptor. Automatic channel scan and sync permits quick, easy frequency setting, and the high density 375 kHz interval channel plan enables simultaneous multi-channel operation.
DWR-S03D-HS1 DWX Gen3 2-Channel Digital Wireless Slot-In Receiver
Sony DWR-S03D-HS1 (DWR-S03D/HS1, DWR_S03D_HS1, DWR/S03D/HS1, DWRS03DHS1, dwr-s03d/hs1) DWX Gen3 2-Channel Digital Wireless Slot-In Receiver The DWR-S03D is a digital wireless 2-channel slot-in radio receiver of the DWX series, which is especially suitable for multi-channel operation with high density in large productions. The receiver belongs to the 3rd generation of the professional DWX series and has four different codec modes for a variety of applications. MODE1 is compatible with the 1st generation DWX series devices, MODE2 prioritizes short latency times while maintaining transmission stability and high audio quality, MODE3 provides additional signal processing and suppresses noise caused by unexpected pulse interference, and MODE4 prioritizes audio quality while maintaining transmission stability and low delay time. It transmits high-quality 24-bit audio within certain frequency bandwidths (depending on the country). The monitoring and control functions of Cross Remote™ allow input attenuation, RF frequency selection, RF output power, cut-off frequency for audio low-pass filters, and sleep mode of the associated Sony DWT-B30 pocket transmitter to be remotely controlled via the receiver. This eliminates unplanned shooting breaks and walking distances. Included in delivery is the interface adapter DWA-SLAS1 with 15-pin D-Sub connector, which can be attached to Sony camcorders. Optionally, the interface adapter DWA-SLAU1 with 25-pin D-Sub connector is also available, which enables it to be attached to devices with UniSlot®. For ENG/EFP applications, the two optional receiver adapters DWA-01D and DWA-F01D are available.
DWR-S03D-HU1 Digital wireless 2-channel slot-in radio receiver
Sony DWR-S03D-HU1 (DWR-S03D/HU1, DWR_S03D_HU1, DWR/S03D/HU1, DWRS03DHU1, dwr-s03d-hu1) Digital wireless 2-channel slot-in radio receiver The DWR-S03D is a digital wireless 2-channel slot-in radio receiver of the DWX series, which is especially suitable for multi-channel operation with high density in large productions. The receiver belongs to the 3rd generation of the professional DWX series and has four different codec modes for a variety of applications. MODE1 is compatible with the 1st generation DWX series devices, MODE2 prioritizes short latency times while maintaining transmission stability and high audio quality, MODE3 provides additional signal processing and suppresses noise caused by unexpected pulse interference, and MODE4 prioritizes audio quality while maintaining transmission stability and low delay time. It transmits high-quality 24-bit audio within certain frequency bandwidths (depending on the country). The monitoring and control functions of Cross Remote™ allow input attenuation, RF frequency selection, RF output power, cut-off frequency for audio low-pass filters, and sleep mode of the associated Sony DWT-B30 pocket transmitter to be remotely controlled via the receiver. This eliminates unplanned shooting breaks and walking distances. Included in delivery is the interface adapter DWA-SLAU1 with 25-pin D-Sub connector, which can be attached to devices with UniSlot®. Optionally, the interface adapter DWA-SLAS1 with 15-pin D-Sub connector is also available, which enables it to be attached to camcorders by Sony. For ENG/EFP applications, the two optional receiver adapters DWA-01D and DWA-F01D are available.
DWR-S03D-L DWX Gen3 2-Channel Digital Wireless Slot-In Receiver
Sony DWR-S03D-L (DWR-S03D/L, DWR_S03D_L, DWRS03DL, DWR/S03D/L, DWR-S03D_L, dwr-s03D/l) DWX Gen3 2-Channel Digital Wireless Slot-In Receiver This high performance 2-channel portable slot-in receiver is an ideal choice for ENG/EFP and location sound applications. The DWR-S03D is part of Sony's third generation DWX series digital wireless microphone system that combines advanced digital technologies, analogue microphone expertise, wireless audio transmission technologies and an enviable reputation for stability. The receiver operates with a wide bandwidth up to 148 MHz (depending on region), increasing the probability of finding unoccupied frequencies in congested metropolitan areas. Light and compact, the DWR-S03D can be mounted in the slot of Sony or other professional camcorders using the optional DWA-SLAS1 or DWA-SLAU1 interface adaptor. Automatic channel scan and sync permits quick, easy frequency setting, and the high density 375 kHz interval channel plan enables simultaneous multi-channel operation.
DWR-S03D-LS1 Digital wireless 2-channel slot-in radio receiver
Sony DWR-S03D-LS1 (DWR-S03D/LS1, DWR_S03D_LS1, DWR/S03D/LS1, DWRS03DLS1, dwr-s03d-ls1) Digital wireless 2-channel slot-in radio receiver The DWR-S03D is a digital wireless 2-channel slot-in radio receiver of the DWX series, which is especially suitable for multi-channel operation with high density in large productions. The receiver belongs to the 3rd generation of the professional DWX series and has four different codec modes for a variety of applications. MODE1 is compatible with the 1st generation DWX series devices, MODE2 prioritizes short latency times while maintaining transmission stability and high audio quality, MODE3 provides additional signal processing and suppresses noise caused by unexpected pulse interference, and MODE4 prioritizes audio quality while maintaining transmission stability and low delay time. It transmits high-quality 24-bit audio within certain frequency bandwidths (depending on the country). The monitoring and control functions of Cross Remote™ allow input attenuation, RF frequency selection, RF output power, cut-off frequency for audio low-pass filters, and sleep mode of the associated Sony DWT-B30 pocket transmitter to be remotely controlled via the receiver. This eliminates unplanned shooting breaks and walking distances. Included in delivery is the interface adapter DWA-SLAS1 with 15-pin D-Sub connector, which can be attached to Sony camcorders. Optionally, the interface adapter DWA-SLAU1 with 25-pin D-Sub connector is also available, which enables it to be attached to devices with UniSlot®. For ENG/EFP applications, the two optional receiver adapters DWA-01D and DWA-F01D are available.
DWR-S03D-LU1 Digital wireless 2-channel slot-in radio receiver
Sony DWR-S03D-LU1 (DWR-S03D/LU1, DWR_S03D_LU1, DWR/S03D/LU1, DWRS03DLU1, dwr-s03d-lu1) Digital wireless 2-channel slot-in radio receiver The DWR-S03D is a digital wireless 2-channel slot-in radio receiver of the DWX series, which is especially suitable for multi-channel operation with high density in large productions. The receiver belongs to the 3rd generation of the professional DWX series and has four different codec modes for a variety of applications. MODE1 is compatible with the 1st generation DWX series devices, MODE2 prioritizes short latency times while maintaining transmission stability and high audio quality, MODE3 provides additional signal processing and suppresses noise caused by unexpected pulse interference, and MODE4 prioritizes audio quality while maintaining transmission stability and low delay time. It transmits high-quality 24-bit audio within certain frequency bandwidths (depending on the country). The monitoring and control functions of Cross Remote™ allow input attenuation, RF frequency selection, RF output power, cut-off frequency for audio low-pass filters, and sleep mode of the associated Sony DWT-B30 pocket transmitter to be remotely controlled via the receiver. This eliminates unplanned shooting breaks and walking distances. Included in delivery is the interface adapter DWA-SLAU1 with 25-pin D-Sub connector, which can be attached to devices with UniSlot®. Optionally, the interface adapter DWA-SLAS1 with 15-pin D-Sub connector is also available, which enables it to be attached to camcorders by Sony. For ENG/EFP applications, the two optional receiver adapters DWA-01D and DWA-F01D are available.
DWT-B01N/42 Digital Wireless Body-Pack Transmitter
Sony DWT-B01N/42 (DWT-B01N-42, DWT/B01N/42, DWT_B01N_42, DWTB01N42, dwt-b01n/42) Digital Wireless Body-Pack Transmitter High quality wide-band transmitter with three codec modes providing short audio latency and more reliable transmission The DWT-B01N body-pack transmitter forms part of the DWX series system, offering high-quality full-digital operation, shorter audio latency and more reliable RF transmission mode – ideal for a variety of high-quality applications, including broadcast studio, theatre and live sound. The DWX series system delivers superb-quality wireless transmission of 24-bit digital audio. Thanks to its improved codec and new hardware, it can provide higher sound quality with lower audio latency. The DWX series works with Sony control software Wireless Studio for PC and Wireless Studio Mobile for smartphones* to give users flexible control of the system. Remote control of up to 82 transmitters can be achieved using the Cross Remote™ function combined with the RMU-01 remote control unit. Three codec modes designed for wide variety of applications MODE1 for compatibility with DWX series applications, MODE2 with higher quality sound and low latency ideal for theatre, tour and broadcast applications, and MODE3 with more reliable RF transmission ideal for speech applications. Low audio latency and high quality sound MODE2 provides higher quality sound with a 96kHz sampling rate and very low audio latency of 1.5 msec**. Compatibility with DWX series MODE1 operation provides the same high quality, reliability and audio latency as the previous DWX series version. Smartphone control* Wireless Studio Mobile software gives users remote control of the DWX series system via a smartphone. Notes * Wireless Studio Mobile supported OS: iOS Ver.8.0 or later and Android Ver.4.1 or later. Operation is not guaranteed on all smartphones. **Analogue out, 2.5 msec for digital out
DWT-B03R/H DWX Series Digital Wireless Microphone Bodypack Transmitter
Sony DWT-B03R/H (DWT/B03R/H, DWT-B03R-H, DWT_B03R_H, DWTB03RH, dwt-b03r/h) DWX Series Digital Wireless Microphone Bodypack Transmitter The Sony DWT-B03R Transmitter is an ideal choice for live sound applications including theatre and concerts, as well as studio based TV production and ENG/EFP. Light and compact (27% smaller than its DWT-B01N predecessor), the DWT-B03R features a tough magnesium body that's resistant to rain, spray and sweat. Sony's advanced digital audio processing, encryption and RF transmission technologies assure secure, stable transmission and reception of very high-quality audio with low latency. The DWT-B03R is ideal for use in large-scale multichannel productions, supporting up to 21 simultaneous channels per 8MHz TV band. The DWT-B03R is compatible with Sony Wireless Studio control software for PC (Ver 5.0 or later), allowing flexible remote operation. Remote control of up to 82 transmitters is possible using the Cross Remote™ function combined with the RMU-01 remote control unit (available separately). The small, lightweight and sweat-proof bodypack transmitter is ideal for theatre, drama and movie production. It offers a remarkably low audio latency of 1.2ms1, with 148MHz wideband operation. It utilises a rechargeable Li-ion battery that equips users with many hours of battery operation time.
DWT-B03R/L DWX Series Digital Wireless Microphone Bodypack Transmitter
Sony DWT-B03R/L (DWT-B03R-L, DWT/B03R/L, DWT_B03R_L, DWTB03RL, dwt-b03r/l) DWX Series Digital Wireless Microphone Bodypack Transmitter Superb audio quality and stable operation in a wide range of environments The third generation of Sony's acclaimed DWX series, this high performance digital wireless bodypack transmitter is an ideal choice for live sound applications including theatre and concerts, as well as studio based TV production and ENG/EFP. Light and compact (27% smaller than its DWT-B01N predecessor), the DWT-B03R features a tough magnesium body that's resistant to rain, spray and sweat. Sony's advanced digital audio processing, encryption and RF transmission technologies assure secure, stable transmission and reception of very high quality audio with low latency. The DWT-B03R is ideal for use in large-scale multi-channel productions, supporting up to 21 simultaneous channels per 8MHz TV band or up to 16 simultaneous channels per 6MHz TV band. The DWT-B03R is compatible with Sony Wireless Studio control software for PC (Ver 5.0 or later) , allowing flexible remote operation. Remote control of up to 82 transmitters is possible using the Cross Remote™ function combined with the RMU-01 remote control unit (available separately).
DWT-B30/H DWX Gen3 Digital Wireless Bodypack Transmitter
Sony DWT-B30/H (DWT/B30/H, DWT-B30-H, DWT_B30_H, DWTB30H, dwt-b30/h) DWX Gen3 Digital Wireless Bodypack Transmitter This highDWX Series Gen3 bodypack, 566.025 MHz to 714.000 MHz Performance wireless bodypack transmitter is an ideal choice for live sound applications including theatre and concerts, as well as studio-based TV production and ENG/EFP. The DWT-B30 is part of Sony's third generation DWX series digital wireless microphone system that combines advanced digital technologies, analogue microphone expertise, wireless audio transmission technologies and an enviable reputation for stability. Sophisticated audio processing, encryption and RF transmission technologies assure secure, stable digital transmission and reception of very high-quality audio with low latency. The transmitter operates with a wide bandwidth of up to 148 MHz (depending on region), and the high density 375 kHz interval channel plan enables simultaneous multi-channel operation, increasing the probability of finding unoccupied frequencies in congested metropolitan areas. The DWT-B30 is compatible with Sony Wireless Studio control software for PC (Ver 5.22 or later) , allowing flexible remote operation. Control of up to 82 transmitters is possible using the Cross Remote™ function combined with the RMU-01 remote control unit (available separately).
DWT-B30/L DWX Gen3 Digital Wireless Bodypack Transmitter
Sony DWT-B30/L (DWT/B30/L, DWT-B30-L, DWT_B30_L, DWTB30L, dwt-b30/l) DWX Gen3 Digital Wireless Bodypack Transmitter This high performance wireless bodypack transmitter is an ideal choice for live sound applications including theatre and concerts, as well as studio based TV production and ENG/EFP. The DWT-B30 is part of Sony's third generation DWX series digital wireless microphone system that combines advanced digital technologies, analogue microphone expertise, wireless audio transmission technologies and an enviable reputation for stability. Sophisticated audio processing, encryption and RF transmission technologies assure secure, stable digital transmission and reception of very high quality audio with low latency. The transmitter operates with a wide bandwidth up to 148 MHz (depending on region), and the high density 375 kHz interval channel plan enables simultaneous multi-channel operation, increasing the probability of finding unoccupied frequencies in congested metropolitan areas. The DWT-B30 is compatible with Sony Wireless Studio control software for PC (Ver 5.22 or later) , allowing flexible remote operation. Control of up to 82 transmitters is possible using the Cross Remote™ function combined with the RMU-01 remote control unit (available separately).
DWT-P01N/21 Digital Wireless Microphone Plug-On Transmitter
Sony DWT-P01N/21 (DWT-P01N-21, DWT/P01N/21, DWT_P01N_21, DWTP01N21, dwt-p01n/21) Digital Wireless Microphone Plug-On Transmitter High quality wide-band transmitter with three codec modes providing short audio latency and more reliable transmission The DWT-P01N XLR plug-on transmitter forms part of the DWX series digital wireless microphone system that offers high-quality full-digital operation shorter audio latency and more reliable RF transmission mode - a perfect match for high-quality ENG/EFP applications. The DWX series system delivers superb-quality wireless transmission of 24-bit digital audio. Thanks to its improved codec and new hardware, it can provide higher sound quality with lower audio latency. NOTE: This model is available in multiple versions to support the widest possible range of operating frequencies. Please refer to product specifications for more information. Three codec modes designed for wide variety of applications MODE1 for compatibility with DWX series applications, MODE2 with higher quality sound and low latency ideal for theatre, tour and broadcast applications, and MODE3 with more reliable RF transmission ideal for speech applications. Low audio latency and high quality sound MODE2 provides higher quality sound with a 96kHz sampling rate and very low audio latency of 1.5 msec*. More reliable RF transmissions expands the operation range MODE3 operation optimised for reliable transmission by preventing drop out by interference with additional error correction. Compatibility with DWX series MODE1 operation provides the same high quality, reliability and audio latency as the previous DWX series version.
DWT-P01N/33 Digital Wireless Microphone Plug-on Transmitter
Sony DWT-P01N/33 (DWT-P01N-33, DWT/P01N/33, DWT_P01N_33, DWTP01N33, dwt-p01n/33) Digital Wireless Microphone Plug-on Transmitter High quality wide-band transmitter with three codec modes providing short audio latency and more reliable transmission The DWT-P01N XLR plug-on transmitter forms part of the DWX series digital wireless microphone system that offers high-quality full-digital operation shorter audio latency and more reliable RF transmission mode - a perfect match for high-quality ENG/EFP applications. The DWX series system delivers superb-quality wireless transmission of 24-bit digital audio. Thanks to its improved codec and new hardware, it can provide higher sound quality with lower audio latency. NOTE: This model is available in multiple versions to support the widest possible range of operating frequencies. Please refer to product specifications for more information. Three codec modes designed for wide variety of applications MODE1 for compatibility with DWX series applications, MODE2 with higher quality sound and low latency ideal for theatre, tour and broadcast applications, and MODE3 with more reliable RF transmission ideal for speech applications. Low audio latency and high quality sound MODE2 provides higher quality sound with a 96kHz sampling rate and very low audio latency of 1.5 msec*. More reliable RF transmissions expands the operation range MODE3 operation optimised for reliable transmission by preventing drop out by interference with additional error correction. Compatibility with DWX series MODE1 operation provides the same high quality, reliability and audio latency as the previous DWX series version. NOTE: *Analogue out, 2.5 msec for digital out
DWT-P01N/42 Digital Wireless Microphone Plug-On Transmitter
Sony DWT-P01N/42 (DWT/P01N/42, DWT-P01N-42, DWT_P01N_42, DWTP01N42, dwt-p01n/42) Digital Wireless Microphone Plug-On Transmitter High quality wide-band transmitter with three codec modes providing short audio latency and more reliable transmission The DWT-P01N XLR plug-on transmitter forms part of the DWX series digital wireless microphone system that offers high-quality full-digital operation shorter audio latency and more reliable RF transmission mode - a perfect match for high-quality ENG/EFP applications. The DWX series system delivers superb-quality wireless transmission of 24-bit digital audio. Thanks to its improved codec and new hardware, it can provide higher sound quality with lower audio latency. NOTE: This model is available in multiple versions to support the widest possible range of operating frequencies. Please refer to product specifications for more information. Three codec modes designed for wide variety of applications MODE1 for compatibility with DWX series applications, MODE2 with higher quality sound and low latency ideal for theatre, tour and broadcast applications, and MODE3 with more reliable RF transmission ideal for speech applications. Low audio latency and high quality sound MODE2 provides higher quality sound with a 96kHz sampling rate and very low audio latency of 1.5 msec*. More reliable RF transmissions expands the operation range MODE3 operation optimised for reliable transmission by preventing drop out by interference with additional error correction. Compatibility with DWX series MODE1 operation provides the same high quality, reliability and audio latency as the previous DWX series version. NOTE: *Analogue out, 2.5 msec for digital out
EK 2000 IEM BW-X Bodypack receiver
Sennheiser 503865 (503-865, 503/865, 50-38-65, 503 865) (EK-2000-IEM-BW-X, EK/2000/IEM/BW/X, EK 2000 IEM BW X) EK 2000 IEM BW-X Bodypack receiver This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
EK 2000 IEM GW-X Bodypack receiver
Sennheiser 503863 (503-863, 503/863, 50-38-63, 503 863) (EK-2000-IEM-GW-X, EK/2000/IEM/GW/X, EK 2000 IEM GW X) EK 2000 IEM GW-X Bodypack receiver This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
EK 2000 IEM-GBW Bodypack receiver
Sennheiser 504947 (504-947, 504/947, 50-49-47, 504 947) (EK-2000-IEM-GBW, EK/2000/IEM/GBW, EK 2000 IEM GBW) EK 2000 IEM-GBW Bodypack receiver This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
EK IEM G4-A Stereo Bodypack Receiver
Sennheiser 509622 (EK-IEM-G4-A, EK/IEM-G4-A, EK/IEM/G4/A, EK IEM G4 A) EK IEM G4-A Stereo Bodypack Receiver. Robust bodypack receiver delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
EK IEM G4-A1 Stereo Bodypack Receiver
Sennheiser 509621 (EK-IEM-G4-A1, EK/IEM-G4-A1, EK/IEM/G4/A1, EK IEM G4 A1) EK IEM G4-A1 Stereo Bodypack Receiver. Robust bodypack receiver delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
EK IEM G4-B Stereo Bodypack Receiver
Sennheiser 509624 (EK-IEM-G4-B, EK/IEM-G4-B, EK/IEM/G4/B, EK IEM G4 B) EK IEM G4-B Stereo Bodypack Receiver. Robust bodypack receiver delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
EK IEM G4-G Stereo Bodypack Receiver
Sennheiser 509623 (EK-IEM-G4-G, EK/IEM-G4-G, EK/IEM/G4/G, EK IEM G4 G) EK IEM G4-G Stereo Bodypack Receiver. Robust bodypack receiver delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
EK IEM G4-GB Stereo Bodypack Receiver
Sennheiser 509911 (EK-IEM-G4-GB, EK/IEM-G4-GB, EK/IEM/G4/GB, EK IEM G4 GB) EK IEM G4-GB Stereo Bodypack Receiver. Robust bodypack receiver delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
EM-XSW 1 DUAL-A Dual-Channel Stationary Receiver with Internal Antennas A Range
Sennheiser 508277 (508 277, 508/277, 508-277, 50-82-77) (EMXSW-1-DUAL-A, EM/XSW 1 DUAL/A, EM-XSW-1 DUAL-A) EM-XSW 1 DUAL-A Dual-Channel Stationary Receiver with Internal Antennas A Range The EM-XSW 1 Dual-Channel Stationary Receiver with Internal Antennas from Sennheiser is a 2-channel analog UHF wireless receiver. It can be used for singers and presenters when paired with an XS wireless 1 series handheld transmitter and microphone capsule (sold separately). The dual-channel receiver is designed with ease of use in mind and is well suited for DJ, church, and school applications. Each receiver channel is built with antenna-switching diversity reception and features automatic frequency management and synchronization via remote channel. Up to 10 compatible channels are available.
EM-XSW 1 DUAL-B Dual-Channel Stationary Receiver with Internal Antennas B Range
Sennheiser 508278 (508 278, 508/278, 508-278, 50-82-78) (EMXSW 1 DUAL-B, EM/XSW 1 DUAL-B, EM XSW 1 DUAL B) EM-XSW 1 DUAL-B Dual-Channel Stationary Receiver with Internal Antennas B Range The EM-XSW 1 Dual-Channel Stationary Receiver with Internal Antennas from Sennheiser is a 2-channel analog UHF wireless receiver. It can be used for singers and presenters when paired with an XS wireless 1 series handheld transmitter and microphone capsule (sold separately). The dual-channel receiver is designed with ease of use in mind and is well suited for DJ, church, and school applications. Each receiver channel is built with antenna-switching diversity reception and features automatic frequency management and synchronization via remote channel. Up to 10 compatible channels are available.
EM-XSW 1 DUAL-E Dual-Channel Stationary Receiver with Internal Antennas E Range
Sennheiser 508281 (508 281, 508/281, 508-281, 50-82-81) (EM XSW 1 DUAL-E, EM/XSW 1 DUAL/E, EM XSW 1 DUAL E) EM-XSW 1 DUAL-E Dual-Channel Stationary Receiver with Internal Antennas E Range The EM-XSW 1 Dual-Channel Stationary Receiver with Internal Antennas from Sennheiser is a 2-channel analog UHF wireless receiver. It can be used for singers and presenters when paired with an XS wireless 1 series handheld transmitter and microphone capsule (sold separately). The dual-channel receiver is designed with ease of use in mind and is well suited for DJ, church, and school applications. Each receiver channel is built with antenna-switching diversity reception and features automatic frequency management and synchronization via remote channel. Up to 10 compatible channels are available.
EM-XSW 1 DUAL-GB Dual-Channel Stationary Receiver with Internal Antennas GB Range
Sennheiser 508282 (508-282, 508/282, 508 282, 50-82-82) (EM-XSW 1 DUAL-GB, EM-XSW 1 DUAL-GB , EM-XSW 1 DUAL-GB) EM-XSW 1 DUAL-GB Dual-Channel Stationary Receiver with Internal Antennas GB Range The EM-XSW 1 Dual-Channel Stationary Receiver with Internal Antennas from Sennheiser is a 2-channel analog UHF wireless receiver. It can be used for singers and presenters when paired with an XS wireless 1 series handheld transmitter and microphone capsule (sold separately). The dual-channel receiver is designed with ease of use in mind and is well suited for DJ, church, and school applications. Each receiver channel is built with antenna-switching diversity reception and features automatic frequency management and synchronization via remote channel. Up to 10 compatible channels are available.
EM-XSW 1-A Table Top Receiver A Range
Sennheiser 507308 (507-308, 507/308, 50-73-08, 507 308) (EM/XSW/1-A, EMXSW 1-A, EM XSW 1 A) EM-XSW 1-A Table Top Receiver A Range The EM-XSW 1-A Table Top Receiver from Sennheiser is designed to be paired with the XSW 1-A handheld microphone or bodypack transmitter with a lavalier microphone (sold separately). It can be used to capture audio for live stage applications and features internal, integrated antennas, as well as automatic frequency management, which offers up to ten coordinated frequency presets for wireless applications. The receiver is built to withstand even the toughest stress in everyday on-stage use and offers reliable transmission with easy-to-use set up. No matter whether you're a band, a theater, or at a seminar, the XS Wireless 1 receiver lets you do your thing and not worry about equipment.
EM-XSW 1-A Table Top Receiver B Range
Sennheiser 507309 (507-309, 507/309, 507 309, 50-73-09) (EM/XSW 1-A, EM XSW 1-A, EMXSW 1-A) EM-XSW 1-A Table Top Receiver B Range The EM-XSW 1-B Table Top Receiver from Sennheiser is designed to be paired with the XSW 1-B handheld microphone or bodypack transmitter with a lavalier microphone (sold separately). It can be used to capture audio for live stage applications and features internal, integrated antennas, as well as automatic frequency management, which offers up to ten coordinated frequency presets for wireless applications. The receiver is built to withstand even the toughest stress in everyday on-stage use and offers reliable transmission with easy-to-use set up. No matter whether you're a band, a theater, or at a seminar, the XS Wireless 1 receiver lets you do your thing and not worry about equipment.
EM-XSW 1-E Table Top Receiver E Range
Sennheiser 507312 (507 312, 507/312, 50-73-12, 507-312) (EM/XSW 1-E, EM XSW 1-E, EMXSW 1/E ) EM-XSW 1-E Table Top Receiver E Range The EM-XSW 1-E Table Top Receiver from Sennheiser is designed to be paired with the XSW 1-E handheld microphone or bodypack transmitter with a lavalier microphone (sold separately). It can be used to capture audio for live stage applications and features internal, integrated antennas, as well as automatic frequency management, which offers up to ten coordinated frequency presets for wireless applications. The receiver is built to withstand even the toughest stress in everyday on-stage use and offers reliable transmission with easy-to-use set up. No matter whether you're a band, a theater, or at a seminar, the XS Wireless 1 receiver lets you do your thing and not worry about equipment.
EM-XSW 1-GB Table Top Receiver GB Range
Sennheiser 507313 (507-313, 507 313, 50-73-13, 507/313) (EM/XSW 1/GB, EM XSW 1-GB, EMXSW 1-GB) EM-XSW 1-GB Table Top Receiver GB Range The EM-XSW 1-GB Table Top Receiver from Sennheiser is designed to be paired with the XSW 1-GB handheld microphone or bodypack transmitter with a lavalier microphone (sold separately). It can be used to capture audio for live stage applications and features internal, integrated antennas, as well as automatic frequency management, which offers up to ten coordinated frequency presets for wireless applications. The receiver is built to withstand even the toughest stress in everyday on-stage use and offers reliable transmission with easy-to-use set up. No matter whether you're a band, a theater, or at a seminar, the XS Wireless 1 receiver lets you do your thing and not worry about equipment.
EM-XSW 2-B True Diversity Receiver with External Antennas B Range
Sennheiser 507316 (507 316, 507/316, 507-316 , 50-73-16) (EM XSW 2-B, EMXSW 2-B, EM/XSW 2/B) EM-XSW 2-B True Diversity Receiver with External Antennas B Range The EM-SXW 2 True Diversity Receiver from Sennheiser is an all-in-one series receiver for music, theater, and speech. It can be used when paired with a transmitter and microphone (sold separately) to capture audio for live sound applications. In addition, the series features automatic frequency selection that is simple to operate. Featuring a metal receiver housing, detachable external antennas, and true diversity reception, the EM-SXW 2 receiver has 8 banks with 12 channels, and provides a detailed display with 960 user tuning frequencies. The receiver is offered with easy-to-use scanning and synchronization functions. Thanks to this intuitive operation, you'll almost forget it's wireless.
EM-XSW 2-E True Diversity Receiver with External Antennas E Range
Sennheiser 507319 (507-319, 507 319, 507/319, 50-73-19) (EM XSW 2-E, EM/XSW 2-E, EMXSW 2-E) EM-XSW 2-E True Diversity Receiver with External Antennas E Range The EM-SXW 2 True Diversity Receiver from Sennheiser is an all-in-one series receiver for music, theater, and speech. It can be used when paired with a transmitter and microphone (sold separately) to capture audio for live sound applications. In addition, the series features automatic frequency selection that is simple to operate. Featuring a metal receiver housing, detachable external antennas, and true diversity reception, the EM-SXW 2 receiver has 8 banks with 12 channels, and provides a detailed display with 960 user tuning frequencies. The receiver is offered with easy-to-use scanning and synchronization functions. Thanks to this intuitive operation, you'll almost forget it's wireless.
EM-XSW 2-GB True Diversity Receiver with External Antennas GB Range
Sennheiser 507320 (507-320, 507/320, 507 320, 50-73-20) (EM XSW 2-GB, EM/XSW 2-GB, EMXSW 2/GB) EM-XSW 2-GB True Diversity Receiver with External Antennas GB Range The EM-SXW 2 True Diversity Receiver from Sennheiser is an all-in-one series receiver for music, theater, and speech. It can be used when paired with a transmitter and microphone (sold separately) to capture audio for live sound applications. In addition, the series features automatic frequency selection that is simple to operate. Featuring a metal receiver housing, detachable external antennas, and true diversity reception, the EM-SXW 2 receiver has 8 banks with 12 channels, and provides a detailed display with 960 user tuning frequencies. The receiver is offered with easy-to-use scanning and synchronization functions. Thanks to this intuitive operation, you'll almost forget it's wireless.
EW IEM G4-A Wireless Monitor System
Sennheiser 509609 (EW-IEM-G4-A, EW/IEM/G4-A, EW/IEM/G4/A, EW IEM G4 A) Wireless Monitor System Hear anywhere on stage and make your gig an extraordinary experience – not just for your audience, but also for you. Engineered for pro live sound. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-A1 Wireless Monitor System
Sennheiser 509608 (EW-IEM-G4-A1, EW/IEM/G4-A1, EW/IEM/G4/A1, EW IEM G4 A1) Wireless Monitor System "Special Delivery Item" Hear anywhere on stage and make your gig an extraordinary experience – not just for your audience, but also for you. Engineered for pro live sound. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-B Wireless Monitor System
Sennheiser 509611 (EW-IEM-G4-B, EW/IEM/G4-B, EW/IEM/G4/B, EW IEM G4 B) Wireless Monitor System Hear anywhere on stage and make your gig an extraordinary experience – not just for your audience, but also for you. Engineered for pro live sound. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-E Wireless Monitor System
Sennheiser 509919 (EW-IEM-G4-E, EW/IEM/G4-E, EW/IEM/G4/E, EW IEM G4 E) Wireless Monitor System Hear anywhere on stage and make your gig an extraordinary experience – not just for your audience, but also for you. Engineered for pro live sound. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-G Wireless Monitor System
Sennheiser 509610 (EW-IEM-G4-G, EW/IEM/G4-G, EW/IEM/G4/G, EW IEM G4 G) Wireless Monitor System Hear anywhere on stage and make your gig an extraordinary experience – not just for your audience, but also for you. Engineered for pro live sound. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you! Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency spectrum for daily use on stage.
EW IEM G4-GB Wireless Monitor System 606 - 648 MHz
Sennheiser 509908 (EW-IEM-G4-GB, EW/IEM/G4-GB, EW/IEM/G4/GB, EW IEM G4 GB) Wireless Monitor System Hear anywhere on stage and make your gig an extraordinary experience – not just for your audience, but also for you. Engineered for pro live sound. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you! Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency spectrum for daily use on stage.
EW IEM G4-TWIN-A Wireless Monitor System Kit
Sennheiser 509614 (EW-IEM-G4-TWIN-A, EW/IEM/G4-TWIN-A, EW/IEM/G4/TWIN/A, EWIEMG4TWINA) Wireless Monitor System Kit Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-TWIN-A1 Wireless Monitor System Kit
Sennheiser 509613 (EW-IEM-G4-TWIN-A1, EW/IEM/G4-TWIN-A1, EW/IEM/G4/TWIN/A1, EWIEMG4TWINA1) Wireless Monitor System Kit Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-TWIN-B Wireless Monitor System Kit
Sennheiser 509616 (EW-IEM-G4-TWIN-B, EW/IEM/G4-TWIN-B, EW/IEM/G4/TWIN/B, EWIEMG4TWINB) Wireless Monitor System Kit Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-TWIN-E Wireless Monitor System Kit
Sennheiser 509920 (EW-IEM-G4-TWIN-E, EW/IEM/G4-TWIN-E, EW/IEM/G4/TWIN/E, EWIEMG4TWINE) Wireless Monitor System Kit Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-TWIN-G Wireless Monitor System Kit
Sennheiser 509615 (EW-IEM-G4-TWIN-G, EW/IEM/G4-TWIN-G, EW/IEM/G4/TWIN/G, EWIEMG4TWING) Wireless Monitor System Kit Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications. Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW IEM G4-TWIN-GB Wireless Monitor System Kit
Sennheiser 509909 (EW-IEM-G4-TWIN-GB, EW/IEM/G4-TWIN-GB, EW/IEM/G4/TWIN/GB, EWIEMG4TWINGB) Wireless Monitor System Kit Full control over your performance – everywhere, every day. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you!
EW-D 835-S SET (Q1-6) 470.2 - 526 MHz Wireless Handheld Microphone System
Sennheiser 508750 (50-87-50, 50/8750, 50 87 50, 50/87 50) EW-D 835-S SET (Q1-6) 470.2 - 526 MHz Wireless Handheld Microphone System All-in-one digital wireless handheld set for those who sing or speak featuring Sennheiser's renowned e 835 capsule. Versatile and feature-rich digital wireless system for those who sing, speak or play instruments that allows for seamless product pairing and management via the EW-D Smart Assist App. Receive state-of-the-art live sound featuring Sennheiser‘s renowned e 835 capsule on a lightweight handheld transmitter with integrated mute switch. Raising the bar Evolution Wireless Digital breaks the boundaries by providing more dynamic range than any wireless system currently on the market. Automatically securing the most reliable signal in a matter of seconds and scalable up 90 channels thanks to 56 MHz of tuning bandwidth, it’s easy to see why this wireless system is in a class of its own. Equidistant Spacing – simpler than it sounds Evolution Wireless Digital features an equidistant tuning grid previously only found in our flagship Digital 6000 and Digital 9000 wireless systems. Quality components with exceptional linearity eliminate intermodulation between EW-D transmitters, allowing frequencies to be equally spaced every 600 kHz alongside each other. This simplifies frequency coordination for wireless beginners and seasoned professionals alike, and also contributes to the system’s scalability and impressively high channel count. An engineer in your pocket The power of Bluetooth Low Energy puts full control right in the palm of your hand with the Sennheiser Smart Assist app. Take advantage of a remarkably fast automated setup, mobile access to every system setting and the added benefit of remote monitoring, all from the convenience of your Android or iOS device. Save time, save energy and perform with confidence.
Mobile Network 3G/4G/LTE Wireless Adapter for XDCAM
Sony CBK-WA101/IFU (CBKWA101/IFU, CBK/WA101/IFU, cbk-wa101/ifu) Mobile Network 3G/4G/LTE Wireless Adapter for XDCAMThe CBKWA101/IFU Mobile Network 3G/4G/LTE Wireless Adapter for XDCAM from Sony support Wi-Fi, 3G/4G, and LTE transmission to transmit both proxy data, as well as high resolution data via a USB connection. This wireless adapter unit connects with mobile devices such as smartphones and tablets. It supports Android OS (version 4.1 and later) and iOS (version 7). It also supports TV program production in the field, and is ideal for ENG professionals.The CBKWA101/IFU is designed for the PMW-400 camera, and can be used with the PMW-500/300/200/160/50 with a USB connection, and the PMW-320 & PDW-F800/700 with HD-SDI connection as well. When the wireless adapter is connected to a camcorder/deck via a USB cable, you can use it for high resolution file transmission, basic remote camera control, and wireless adapter status indication. This unit does not require BNC and DC power cable connection.
Sony CBK-NA1 (CBKNA1, CBK/NA1, cbk-na1) Network Accessory Kit Optimises LAN connection for PXW-X180, PXW-X200 and PXW-X500 camcorders working with CBK-WA100 and CBK-WA101 wireless adapters The CBK-NA1 network adapter kit consists of a CBK-NA1E modem attachment for 3G/4G/LTE and Wi-Fi communication, and a CBK-NA1R USB/RJ-45 adapter. The CBK-NA1E allows you to attach the modem to the camcorder’s handle to avoid interfering with the camcorder operation and to improve the signal transmission. The CBK-NA1R allows you to use the camcorder’s streaming features with a wired connection. The unit has a cable clamp mechanism to avoid the USB connector being damaged by a cable stress. Network module extension adapter The CBK-NA1E allows you to attach a 3G/4G/LTE modem to a Sony camcorder and is optimised for the PXW-X180, PXW-X200 and PXW-X500 camcorders. The module is fixed on a 1/4-inch accessory shoe. USB/RJ-45 adapter The CBK-NA1R converts the USB terminal* to the RJ-45 terminal of the camcorder or wireless adapter CBK-WA100 and CBK-WA101. It allows you to connect the camcorder to a network using a LAN cable for streaming with a wired connection. A cable clamp secures the USB connector. The terminal name differs depending on the attaching device (USB wireless LAN module terminal or connecting terminal for external devices).
Network RX Station for XDCAM Camcorders Live Streaming over 4G/LTE and Wi-Fi
Sony PWS-110RX1 (PWS/110RX1, PWS_110RX1, PWS 110RX1) Network RX Station for XDCAM Camcorders Live Streaming over 4G/LTE and Wi-Fi The PWS-110RX1 network RX station is an advanced system for cost efficient live streaming video and audio direct from XDCAM camcorders using 4G/LTE and Wi-Fi networks. The PWS-110RX1 uses Sony’s unique QoS (quality of service) technology or MPEG2-TS to maintain video and audio integrity during transmission. Each PWS-110RX1 unit can simultaneously control two SDI outputs: these can be used to live stream from two locations at the same time. Multiple systems can be added for greater input and output loads. The unit includes reference and timecode input connectors, which enable synchronised operation with broadcast systems. In addition, it can output in a variety of broadcast formats, including 1080i. The PWS-110RX1 system comes with preinstalled Connection Control Manager software that enables easy connection to camcorders and delivers efficient handling of the live streams. Cost efficient live streaming of 1080i over 4G/LTE or Wi-Fi Live streaming video and audio direct from XDCAM camcorders using 4G/LTE and Wi-Fi networks in a variety of broadcast formats, including 1080i High quality Sony's QoS ensures no lost video or audio Sony’s unique QoS (quality of service) technology or MPEG2-TS to maintain video and audio integrity during transmission. SDI outputs Two SDI outputs on each unit allow you to manage two separate streams in and out. Multiple units can be used together to increase capacity.
Networked Media Interface I/O Board for PWS-4500
Sony PWSK-4505 (PWSK/4505, PWSK_4505, PWSK4505) Networked Media Interface I/O Board for PWS-4500 Sony has been developing a next-generation production infrastructure using 10 GbE IP networking, culminating in a practical solution for IP live production systems, the Networked Media Interface. This interface is available with the PWS-4500 system. You can connect with any IP live production environment simply by installing the optional PWSK-4506F Networked Media Interface Board to PWS-4500 live server, allowing video and audio signals to be received and transmitted over an IP network.
PAN-AJWM50E Dual band, compact wireless module
Panasonic PAN-AJWM50E ( AJWM50E, PANAJWM50E, PAN/AJWM50E, PAN AJWM50E) Dual Band, Compact Wireless ModuleThe AJ-WM50 is the dual band, compact wireless module for P2HD and AG-DVX200 camera recorders.The WM50 dual band (2.4GHz and 5GHz) makes for a more reliable, stable connection to a network in various environments yet its compact size enables it to fit in the wireless module compartment of the P2HD cameras. 2.4GHz offers strong connection through obstacles and compatible with many devices whereas 5GHz offers stability from radio wave interference (Microwave, Bluetooth, etc).The current range of P2HD cameras and the AG-DVX200 will support the new wireless module, but it is necessary to update their firmware.The update will be available free of charge on the Panasonic Service site between end of April and June (depending on model). Please check the Panasonic Service site for more details.
RMU-01 Digital Wireless Remote Control Unit
Sony RMU-01 (RMU/01, RMU_01, RMU 01, RMU01, rmu-01) Digital Wireless Remote Control Unit The RMU-01 controls up to 82 digital wireless transmitters via a separate RF carrier in the 2.4GHz spectrum. This unit can be connected using Ethernet cabling (RJ-45) with an optional third-party PoE switch (Power-over-Ethernet) to create a remote control network for use with one or more DWR-R01D receivers. The RMU-01 covers a 10 meter radius (32 feet). Multiple units can be configured to expand the 2.4GHz spectrum coverage area (up to 9 x RMU-01’s max.). The RMU-01 is supplied with a 12V AC adapter for powering the unit when PoE (Power over Ethernet) powering isn’t available. Mounting options include mounting the RMU-01 onto a mic stand using supplied screw adapters or using a supplied bracket mount for ceiling or wall mounting.
RX UHD/HD Wireless Video Transmitter and Receiver System - Receiver only
Atomos AOATOMRXSL01 (AO-ATOMRXSL01, AO/ATOMRXSL01, AO_ATOMRXSL01, AO ATOMRXSL01) RX UHD/HD Wireless Video Transmitter and Receiver System - Receiver only Atomos TX-RX: UHD/HD Wireless Video Transmission System Enhance your production workflow—on set, on location, or in the studio—with the Atomos TX-RX, a professional-grade wireless video transmitter and receiver system. Engineered for ultra-low-latency performance, it delivers stunning 4K HDMI and HD-SDI video over long distances without the need for cables. Seamless Wireless Monitoring TX-RX ensures smooth, real-time video transmission from camera to monitor, monitor to monitor, or even to mobile devices. It allows production crews to freely move, reposition gear, or shoot handheld—keeping director and client monitors connected at all times via reliable 5G Wi-Fi technology. Field-Ready, Professional Performance Compact yet powerful, TX-RX offers up to 300 meters (985 feet) of range with latency as low as 0.06 seconds. The receiver includes both SDI and HDMI outputs, supporting multiple monitors simultaneously. Each transmitter can connect to up to four receivers, making it ideal for multi-camera, multi-monitor environments—from single-operator setups to full production teams. Scalable & Reliable for Any Setup Perfect for filmmakers, broadcasters, and content creators, TX-RX adapts to any workflow with ease. Its lightweight, rugged build ensures durability without sacrificing portability or performance. Flexible Power Options Power the TX-RX with DC input (9–16V), USB-C (5V/2A), or standard NP-F batteries—ideal for both studio and remote shoots. Mobile Monitoring Made Easy Use the free Atomos app to turn your iOS or Android device into a wireless receiver and monitor video in real time—no extra hardware required.
Sennheiser AWM 2 MK II Wallmount Antenna
Sennheiser AWM 2 MK II Wallmount Antenna (509297) With the AWM 2 MK II, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall. Unobtrusive antenna wall or tripod mounting Robust metal housing
Sennheiser Digital UHF Xlr Plug-On Transmitter
Sennheiser Digital UHF Xlr Plug-On Transmitter(700083) The Sennheiser EW-DP SKP Digital Plug-on Transmitter adds versatility and flexibility to EW-DP systems. The SKP turns any wired microphone into a wireless option, opening up opportunities on set. It features an XLR input with a +48V phantom power, a 3.5mm lav mic input, and a micro-SD card slot that enable 24-bit, 48kHz on-board recording.
Sennheiser EW-D ASA Antenna Splitter
Sennheiser EW-D ASA Antenna Splitter(508879) Versatile and feature-rich digital wireless system for those who sing, speak or play instruments that allows for seamless product pairing and management via the EW-D Smart Assist App. Receive state-of-the-art live sound. Raising the bar Evolution Wireless Digital breaks the boundaries by providing more dynamic range than any wireless system currently on the market. Automatically securing the most reliable signal in a matter of seconds and scalable up 90 channels thanks to 56 MHz of tuning bandwidth, it’s easy to see why this wireless system is in a class of its own. Equidistant Spacing – simpler than it sounds Evolution Wireless Digital features an equidistant tuning grid previously only found in our flagship Digital 6000 and Digital 9000 wireless systems. Quality components with exceptional linearity eliminate intermodulation between EW-D transmitters, allowing frequencies to be equally spaced every 600 kHz alongside each other. This simplifies frequency coordination for wireless beginners and seasoned professionals alike, and also contributes to the system’s scalability and impressively high channel count. An engineer in your pocket The power of Bluetooth Low Energy puts full control right in the palm of your hand with the Sennheiser Smart Assist app. Take advantage of a remarkably fast automated setup, mobile access to every system setting and the added benefit of remote monitoring, all from the convenience of your Android or iOS device. Save time, save energy and perform with confidence.
Sennheiser EW-DX 835-S Set (S1-10)
Sennheiser EW-DX 835-S Set (S1-10)(509302) Perfect for Presenters and Singers This set consists of 2 x EW-DX SKM-S (handheld with mute switch), 2 x MMD 835 capsule (cardioid, dynamic), 1 x EW-DX EM 2 rackmout receiver (2 channels) and 2 x BA 70 rechargeable batteries. Focus less on the wireless and more on the audio. Sennheiser EW-DX simplifies your professional workflow by utilizing refined technologies and decades of research to deliver a digital UHF system that can be scaled with ease. Multiple hardware and software options create networkable solutions for nearly any stage or campus, while equidistant channel spacing, auto scan, and Bluetooth® Low Energy sync automatically coordinate and set frequencies with the push of a button. Monitor your devices from a distance—even from your pocket—with tools like Sennheiser’s Control Cockpit, Wireless Systems Manager, and Smart Assist app. The future of wireless is here. Truly simplified workflow EW-DX takes the complexities out of wireless audio by employing sophisticated tools that streamline the setup and monitoring process. With the press of a button, Auto Scan automatically assigns channels using an equidistant tuning grid that allow you to pack more channels more reliably, without problematic intermodulation interference. Take control of the system from your mobile device via the Sennheiser Smart Assist app or utilize advanced software options like Wireless Systems Manager (WSM) and Sennheiser Control Cockpit for a detailed system view in complex, networked environments. Ready to scale, ready to deliver Evolution Wireless Digital is a system that evolves with you. Choose from multiple hardware options, including 2-channel half-rack (9,5") or 4-channel full-rack (19") receivers to right-size your needs today, while keeping expansion open for tomorrow. Dante® network audio, Ethernet control ports, and AES-256 encryption allow EW-DX to be securely transmitted and placed on IT networks, allowing systems to be managed and flex as needs change. Activate Link Density Mode to pack even more channels in a dedicated space and take full advantage of interchangeable series components across the Evolution Wireless Digital line. A wide range of accessories to manage power and signal distribution give you the options you need to build a system you can count on. Rock-solid digital audio throughout Quality and reliability are standard with all Sennheiser products. With EW-DX, digital UHF transmission is augmented by wide, class-leading dynamic range and ultra-low latency. Sennheiser’s proprietary SePac audio codec and new conversion technology sum up to deliver outstanding audio transparency, from capsule input to system output. Intelligent Switching Diversity is an advancement in RF technology that enables the switching of antennas between audio frames to deliver a stable transmission without audible artifacts. In-device charging, 12-hour battery operation, and switching bandwidth up to 88 MHz are only a few more of the many features that make EW-DX the right tool for the job.
Sennheiser SKM 825-XSW-A Handheld Transmitter with e825 Capsule
Sennheiser SKM 825-XSW-A Handheld Transmitter with e825 Capsule(507465) The SKM 825-XSW-A Handheld Transmitter from Sennheiser is a wireless microphone equipped with an e825 Dynamic Cardioid Capsule. It is designed to be paired with the EM-XSW 1 or EM-XSW 2 wireless receivers (sold separately) and can be used to capture audio for singers, presenters, and live sound applications. Featuring automatic frequency management, the transmitter offers up to 10 compatible channels in a stable UHF band. This transmitter is built to withstand even the toughest stress in everyday on-stage use and offers reliable transmission with an easy-to-use set up. No matter whether you're a band, a theater, or at a seminar, the SKM 825-XSW-A Handheld Transmitter lets you do your thing and not worry about channel selection. Great Performance and Price The SKM XSW transmitter lets you concentrate on your talent—and not the equipment. Just switch it on and its automatic frequency management does the rest. You can operate up to 10 coordinated frequency preset wireless connections. Live Sound The transmitter yields an open, natural sound. No lengthy set up—just go! Reliable Transmission On stage, you must put up with a lot of things—so does your equipment. XS Wireless 1 is built to last: Transmitters are designed to withstand even the toughest stress in everyday on-stage use.
Sennheiser SL Bodypack - MKE 2 KIT DW-3
Sennheiser SL Bodypack - MKE 2 KIT DW-3(509210) The SL Bodypack KITs DW are the perfect complement to the new SL Multi-Channel Receiver DW. This KIT contains the compact and robust SL Bodypack DW bodypack transmitter, which is specially designed to transmit the spoken word and is compatible with all Sennheiser neckband and lavalier microphones (e.g. SL Headmic 1 or MKE 1). Thanks to the bi-directional communication between transmitter and receiver, no adjustments need to be made at the transmitter and the automatic frequency and interference management ensures easy setup and maximum transmission reliability. The transmitter's LC display shows the name of the radio link, the charge level of the battery pack(s) and the reception quality. With the easily accessible mute switch, the transmitter can be muted if necessary. The SL Bodypack DW is equipped with a rechargeable lithium-ion battery pack with external charging contacts for easy charging in the chargers and a USB socket for charging via USB. Also included in the kit is the MKE 2 ew Gold, a high-quality, sub-miniature clip-on lavalier microphone which is suitable for all areas of live work. It fulfils the most stringent demands on sound quality and is extremely rugged. A special Umbrella Diaphragm™ and a welded housing protect the MKE 2 ew Gold against sweat and moisture. Colour: matte black. Lockable 3.5 mm jack socket Clear and easy focused user interface Long operation time (up to 15 hours) Advanced power management and Li-Ion rechargeables Secure 256 bit AES encryption Remote controllable New Umbrella Diaphragm™ protects the mic against sweat Very high sound pressure handling capability Versatile attachment due to an extensive range of accessories
Sennheiser SL Bodypack - MKE 40 Kit DW-3
Sennheiser SL Bodypack - MKE 40 Kit DW-3(509225) The SL Bodypack KITs DW are the perfect complement to the new SL Multi-Channel Receiver DW. This KIT contains the compact and robust SL Bodypack DW bodypack transmitter, which is specially designed to transmit the spoken word and is compatible with all Sennheiser neckband and lavalier microphones (e.g. SL Headmic 1 or MKE 1). Thanks to the bi-directional communication between transmitter and receiver, no adjustments need to be made at the transmitter and the automatic frequency and interference management ensures easy setup and maximum transmission reliability. The transmitter's LC display shows the name of the radio link, the charge level of the battery pack(s) and the reception quality. With the easily accessible mute switch, the transmitter can be muted if necessary. The SL Bodypack DW is equipped with a rechargeable lithium-ion battery pack with external charging contacts for easy charging in the chargers and a USB socket for charging via USB. Also included in the kit is the MKE 40 ew, Clip-on microphone with cardioid pattern.
Sennheiser SL MCR 4 DW-3 Multi Channel Receiver for SpeechLine
Sennheiser SL MCR 4 DW-3 Multi Channel Receiver for SpeechLine(508854) The SpeechLine Multi-Channel Receiver with its 2 or 4 channels is the perfect addition to the SpeechLine series. Thanks to its unobtrusive design, the Multi-Channel Receiver can be installed quickly and easily in any room, whether on the wall or ceiling. The device can be operated with a single network cable, thanks to PoE and Dante. Complex analog audio cabling is a thing of the past. The Multi-Channel Receiver also offers a convenient solution for existing installations. Thanks to an integrated auto mixer and the analog mix output, all audio channels can be used simply as a sum signal. The audio mix is also available digitally via Dante, which allows an extension of the existing setup without exchanging the DSP. Due to the bidirectional communication between receiver and transmitter, all settings of the mobile transmitters can easily be made in the Sennheiser Control Cockpit. The receiver's automatic frequency management eliminates the need for manual frequency settings and the automatic interference management guarantees maximum transmission reliability. The user-friendly pairing function ensures a reliable connection between transmitter and receiver. Network integration also makes it possible to remotely control and monitor the receiver via a media control system (e.g. AMX, Crestron). Due to the integrated antennas, a complex antenna installation is no longer necessary.
Sennheiser SR 2050 IEM-AW+(508644) The SR 2050 rack-mount twin transmitter is an in-ear monitoring system designed to meet the highest demands for audio quality and RF transmission and is therefore the first choice for professional touring, broadcast, musical and theater applications. Network-compatible and remotely controllable with the Wireless System Manager (WSM) software. Rugged 19" all-metal housing with integrated power supply unit Up to 3000 frequencies in up to 75 MHz switching bandwidth 20 fixed frequency banks with up to 32 compatible presets 6 banks each with up to 32 tunable channels Frequency setting in 25 kHz steps Switchable RF output power for versatile use Enhanced audio frequency response in the bass range Receivers can be configured from the transmitter menu Can be synchronized with the receiver using infrared interface Monitoring and control using Sennheiser WSM PC software User-friendly menu interface with two-color backlit graphic display (red as a warning) Pilot tone transmission for interference-free operation Adjustable headphone connections For universal application due to extensive range of accessories
Sennheiser XSW IEM EK (C)(509158) A professional IEM receiver is unnoticeable most of the time, but becomes a powerful tool with just a few clicks. That is the DNA of the lightweight XS Wireless IEM bodypack. You can easily expand any XS Wireless IEM setup by connecting additional receivers to your transmitter. Its small status LED is all you might see during rehearsals or gigs. It signals both battery and wireless link status. The LC display only lights up when you access the well-secured settings panel. With just a few clicks, you can balance your in-ear mix, switch between focus modes, use an EQ for elevated high frequencies, enable the limiter, choose a new option from the preset channels, or set your frequency manually. The standard 3.5 mm output is open for the included pair of IE 4 in-ear monitors – or you can upgrade your sound with a model of the IE PRO in-ear monitor line. Advanced features like the limiter help you to protect your ears by clamping down on sudden loud signals. With the EQ option, you can get more air and extra brightness by boosting your sound at 13 kHz. The bodypack operates with two AA primary cells or rechargeable batteries. Depending on the volume level, you can expect about six hours of operating time.
Sennheiser Xsw Iem ek (E) (509159) A professional IEM receiver is unnoticeable most of the time, but becomes a powerful tool with just a few clicks. That is the DNA of the lightweight XS Wireless IEM bodypack. You can easily expand any XS Wireless IEM setup by connecting additional receivers to your transmitter. Its small status LED is all you might see during rehearsals or gigs. It signals both battery and wireless link status. The LC display only lights up when you access the well-secured settings panel. With just a few clicks, you can balance your in-ear mix, switch between focus modes, use an EQ for elevated high frequencies, enable the limiter, choose a new option from the preset channels, or set your frequency manually. The standard 3.5 mm output is open for the included pair of IE 4 in-ear monitors – or you can upgrade your sound with a model of the IE PRO in-ear monitor line. Advanced features like the limiter help you to protect your ears by clamping down on sudden loud signals. With the EQ option, you can get more air and extra brightness by boosting your sound at 13 kHz. The bodypack operates with two AA primary cells or rechargeable batteries. Depending on the volume level, you can expect about six hours of operating time.
Sennheiser XSW IEM EK Receiver
Sennheiser XSW IEM EK Receiver(509157) A professional IEM receiver is unnoticeable most of the time, but becomes a powerful tool with just a few clicks. That is the DNA of the lightweight XS Wireless IEM bodypack. You can easily expand any XS Wireless IEM setup by connecting additional receivers to your transmitter. Its small status LED is all you might see during rehearsals or gigs. It signals both battery and wireless link status. The LC display only lights up when you access the well-secured settings panel. With just a few clicks, you can balance your in-ear mix, switch between focus modes, use an EQ for elevated high frequencies, enable the limiter, choose a new option from the preset channels, or set your frequency manually. The standard 3.5 mm output is open for the included pair of IE 4 in-ear monitors – or you can upgrade your sound with a model of the IE PRO in-ear monitor line. Advanced features like the limiter help you to protect your ears by clamping down on sudden loud signals. With the EQ option, you can get more air and extra brightness by boosting your sound at 13 kHz. The bodypack operates with two AA primary cells or rechargeable batteries. Depending on the volume level, you can expect about six hours of operating time.
Sennheiser XSW IEM SET (A) (509146) Out of the box, the XS Wireless IEM set has all the components you need to set up your personal monitoring in minutes. XS Wireless IEM is the entry to Sennheiser’s renowned in-ear monitoring sound. It delivers the whole potential of in-ear monitoring with an elegant, easy-to-use interface. No tech expertise is needed to get all the benefits: You hear yourself perfectly in any environment and can aim for new levels of perfection. The system includes a rugged transmitter, a lightweight bodypack receiver, IE 4 in-ear starter headphones, batteries, a power supply with multi-voltage adapter, and a rack mount kit for the transmitter. Eight pre-configured frequency banks in the professional UHF range (with 12 perfectly aligned channels each) keep your connection reliable and clear in every situation. Standard and advanced features make XS Wireless IEM flexible in both small and large applications. The series scales with your demands during rehearsals or live shows, on a club stage or for a worship service. Multiple audio modes match varying performances and mixing demands. You can easily change to mono, stereo, or a two-channel focus mode. The stereo receiver bodypack, although lightweight, is designed with live stages in mind. Setting options are well secured behind a stage-proof panel. A status LED keeps you informed about battery and connection status, while the LC display offers access to further settings. You can fine-tune your preferred focus mode for in-ear monitoring, balance your mix, switch the EQ to enhance the higher frequencies, or select your channel or a manual frequency. The stereo transmitter comes with a rugged metal housing. Fine-tuning the most important options has never been easier. Whether you want to increase gain, check the frequency setup, or sync some more receivers for your band setup: It all needs fewer clicks than the count-in of your drummer. A rack mount kit and a removable antenna allow for flexible setups and configurations. The set also includes a pair of IE 4 in-ear headphones. They reproduce outstanding sound quality and high dynamics, and are equipped with exchangeable ear sleeves to give a secure and comfortable fit. You get a good isolation from environmental noise as well as a very good bass response.
Sennheiser xsw Iem set (B) (509147) Out of the box, the XS Wireless IEM set has all the components you need to set up your personal monitoring in minutes. XS Wireless IEM is the entry to Sennheiser’s renowned in-ear monitoring sound. It delivers the whole potential of in-ear monitoring with an elegant, easy-to-use interface. No tech expertise is needed to get all the benefits: You hear yourself perfectly in any environment and can aim for new levels of perfection. The system includes a rugged transmitter, a lightweight bodypack receiver, IE 4 in-ear starter headphones, batteries, a power supply with multi-voltage adapter, and a rack mount kit for the transmitter. Eight pre-configured frequency banks in the professional UHF range (with 12 perfectly aligned channels each) keep your connection reliable and clear in every situation. Standard and advanced features make XS Wireless IEM flexible in both small and large applications. The series scales with your demands during rehearsals or live shows, on a club stage or for a worship service. Multiple audio modes match varying performances and mixing demands. You can easily change to mono, stereo, or a two-channel focus mode. The stereo receiver bodypack, although lightweight, is designed with live stages in mind. Setting options are well secured behind a stage-proof panel. A status LED keeps you informed about battery and connection status, while the LC display offers access to further settings. You can fine-tune your preferred focus mode for in-ear monitoring, balance your mix, switch the EQ to enhance the higher frequencies, or select your channel or a manual frequency. The stereo transmitter comes with a rugged metal housing. Fine-tuning the most important options has never been easier. Whether you want to increase gain, check the frequency setup, or sync some more receivers for your band setup: It all needs fewer clicks than the count-in of your drummer. A rack mount kit and a removable antenna allow for flexible setups and configurations. The set also includes a pair of IE 4 in-ear headphones. They reproduce outstanding sound quality and high dynamics, and are equipped with exchangeable ear sleeves to give a secure and comfortable fit. You get a good isolation from environmental noise as well as a very good bass response.
Sennheiser XSW IEM SET (C) (509148) Out of the box, the XS Wireless IEM set has all the components you need to set up your personal monitoring in minutes. XS Wireless IEM is the entry to Sennheiser’s renowned in-ear monitoring sound. It delivers the whole potential of in-ear monitoring with an elegant, easy-to-use interface. No tech expertise is needed to get all the benefits: You hear yourself perfectly in any environment and can aim for new levels of perfection. The system includes a rugged transmitter, a lightweight bodypack receiver, IE 4 in-ear starter headphones, batteries, a power supply with multi-voltage adapter, and a rack mount kit for the transmitter. Eight pre-configured frequency banks in the professional UHF range (with 12 perfectly aligned channels each) keep your connection reliable and clear in every situation. Standard and advanced features make XS Wireless IEM flexible in both small and large applications. The series scales with your demands during rehearsals or live shows, on a club stage or for a worship service. Multiple audio modes match varying performances and mixing demands. You can easily change to mono, stereo, or a two-channel focus mode. The stereo receiver bodypack, although lightweight, is designed with live stages in mind. Setting options are well secured behind a stage-proof panel. A status LED keeps you informed about battery and connection status, while the LC display offers access to further settings. You can fine-tune your preferred focus mode for in-ear monitoring, balance your mix, switch the EQ to enhance the higher frequencies, or select your channel or a manual frequency. The stereo transmitter comes with a rugged metal housing. Fine-tuning the most important options has never been easier. Whether you want to increase gain, check the frequency setup, or sync some more receivers for your band setup: It all needs fewer clicks than the count-in of your drummer. A rack mount kit and a removable antenna allow for flexible setups and configurations. The set also includes a pair of IE 4 in-ear headphones. They reproduce outstanding sound quality and high dynamics, and are equipped with exchangeable ear sleeves to give a secure and comfortable fit. You get a good isolation from environmental noise as well as a very good bass response.
Sennheiser Xsw Iem Set (E)(509149) Out of the box, the XS Wireless IEM set has all the components you need to set up your personal monitoring in minutes. XS Wireless IEM is the entry to Sennheiser’s renowned in-ear monitoring sound. It delivers the whole potential of in-ear monitoring with an elegant, easy-to-use interface. No tech expertise is needed to get all the benefits: You hear yourself perfectly in any environment and can aim for new levels of perfection. The system includes a rugged transmitter, a lightweight bodypack receiver, IE 4 in-ear starter headphones, batteries, a power supply with multi-voltage adapter, and a rack mount kit for the transmitter. Eight pre-configured frequency banks in the professional UHF range (with 12 perfectly aligned channels each) keep your connection reliable and clear in every situation. Standard and advanced features make XS Wireless IEM flexible in both small and large applications. The series scales with your demands during rehearsals or live shows, on a club stage or for a worship service. Multiple audio modes match varying performances and mixing demands. You can easily change to mono, stereo, or a two-channel focus mode. The stereo receiver bodypack, although lightweight, is designed with live stages in mind. Setting options are well secured behind a stage-proof panel. A status LED keeps you informed about battery and connection status, while the LC display offers access to further settings. You can fine-tune your preferred focus mode for in-ear monitoring, balance your mix, switch the EQ to enhance the higher frequencies, or select your channel or a manual frequency. The stereo transmitter comes with a rugged metal housing. Fine-tuning the most important options has never been easier. Whether you want to increase gain, check the frequency setup, or sync some more receivers for your band setup: It all needs fewer clicks than the count-in of your drummer. A rack mount kit and a removable antenna allow for flexible setups and configurations. The set also includes a pair of IE 4 in-ear headphones. They reproduce outstanding sound quality and high dynamics, and are equipped with exchangeable ear sleeves to give a secure and comfortable fit. You get a good isolation from environmental noise as well as a very good bass response.
Sennheiser Xsw Iem Sr (A)(509151) The rugged XS Wireless IEM transmitter features metal housing designed for ever-changing stages, rehearsals, and travels. The transmitter can be operated stand-alone or as part of a rack with the optional rack mount kit. The removeable BNC antenna allows for various mounting options. The backlit front interface offers easy and simplified access in a clearly arranged menu. Just a few clicks, even on dark stages, and you can optimize input signals, link additional receivers with the infrared panel, or simply monitor the audio status. The two XLR combo inputs on the back are open for both XLR or 6.3 mm (1/4 inch) connections, resulting in a high flexibility with different cabling options. A 6.3 mm (1/4 inch) headphone jack output on the front can be used for wired, stationary monitoring or as a quick overview option in larger setups. Advanced transmitter settings like gain, input sensitivity, mono or stereo options, and easy frequency management with eight frequency banks with 12 precalculated channels each allow perfect monitoring for any demand, on any stage and in any location.
Sennheiser xsw iem sr (B) (509152) The rugged XS Wireless IEM transmitter features metal housing designed for ever-changing stages, rehearsals, and travels. The transmitter can be operated stand-alone or as part of a rack with the optional rack mount kit. The removeable BNC antenna allows for various mounting options. The backlit front interface offers easy and simplified access in a clearly arranged menu. Just a few clicks, even on dark stages, and you can optimize input signals, link additional receivers with the infrared panel, or simply monitor the audio status. The two XLR combo inputs on the back are open for both XLR or 6.3 mm (1/4 inch) connections, resulting in a high flexibility with different cabling options. A 6.3 mm (1/4 inch) headphone jack output on the front can be used for wired, stationary monitoring or as a quick overview option in larger setups. Advanced transmitter settings like gain, input sensitivity, mono or stereo options, and easy frequency management with eight frequency banks with 12 precalculated channels each allow perfect monitoring for any demand, on any stage and in any location.
SK AVX-3 Body-Pack Transmitter for the AVX Wireless Microphone System
Sennheiser 505859 (505-859, 505/859, 50-58-59, 505-859) (SK-AVX-3, SK/AVX-3, SKAVX-3) SK AVX-3 Body-Pack Transmitter for the AVX Wireless Microphone System The SK AVX is the bodypack transmitter for the AVX system. It features self configuring digital transmission which eliminates time-consuming radio frequency setup. The AVX matches perfectly to your camera's input sensitivity without having to adjust the audio level on the microphone.
SL BODYPACK DW-3-EU Bodypack Wireless Microphone Transmitter
Sennheiser 505883 (505-883, 50-58-83, 505/883, 505 883) (SL-BODYPACK-DW-3-EU, SL/BODYPACK/DW-3-EU, SL BODYPACK DW 3 EU) SL BODYPACK DW-3-EU Bodypack Wireless Microphone Transmitter The compact but robust SL Bodypack DW is optimized for speech in presentations or lectures where every word matters. It is compatible with all Sennheiser mircophones such as SL Headmic 1 or MKE 1. Thanks to bi-directional communication between transmitter and receiver, no settings need to be adjusted on the transmitter. The automatic frequency and interference management allows convenient and reliable operation. The LC display provides the link name, battery status and reception quality. The easy-to-access mute-slider makes the use of the microphone very convenient. The SL Bodypack DW comes with a rechargeable Li-Ion battery with external charging contacts - for easy charging with the CHG 2 - and a USB socket.
SL RACK RECEIVER DW-3-UK SpeechLine Digital Wireless SL Rack Receiver
Sennheiser 505892 (505-892, 505/892, 50-58-92, 505 892) (SL-RACK-RECEIVER-DW-3-UK, SL/RACK/RECEIVER DW-3-UK, SL RACK RECEIVER DW 3 UK) SL RACK RECEIVER DW-3-UK SpeechLine Digital Wireless SL Rack Receiver The half 19" stationary SL Rack Receiver DW is the easy-to-integrate core of the SpeechLine Digital Wireless System. It features a clear visible OLED display for easy setup and operation. Thanks to the bi-directional communication all settings of the mobile transmitters can be adjusted from the receiver side. The automatic frequency and interference management allows convenient and reliable operation. Thanks to the easy-to-handle pairing process, the transmitter and receiver are securely linked. Via network integration all settings and statuses are also accessible via AMX/Crestron media control protocol and the dedicated Sennheiser iOS Apps. The antennas can be either back or front-mounted. Furthermore, extension cables for wall mounting are available.
SpeechLine Digital Wireless Bodypack kit
SpeechLine Digital Wireless Bodypack kit(509220) This Sennheiser SL Bodypack - ME 2 KIT DW-4 combines a compact and robust Speechline SL Bodypack DW digital wireless transmitter with a black, ME 2 omnidirectional clip-on lavalier microphone for clear and intelligible speech and lecture applications. A BA 30 rechargeable battery pack is also included. Sennheiser SpeechLine Digital Wireless SL Bodypack DW-4-US Wireless Transmitter The SpeechLine Digital Wireless SL Bodypack DW-4-US from Sennheiser is an SL Series wireless transmitter optimized for speech. It can be used when paired with an optional wireless receiver and microphone in applications for meetings, lectures, conferences presentations where every word matters. In addition, it is compatible with all Sennheiser microphones such as the SL Headmic 1 or MKE 1 (sold separately). Featuring bi-directional communication between transmitter and receiver, the automatic frequency and interference management allows for convenient and reliable operation, which means the SL bodypack requires no settings to be adjusted. The LC display provides the link name, battery status and reception quality, and the easy-to-access mute-slider makes the use of the microphone very convenient. Furthermore, the SL bodypack comes with a rechargeable BA 30 accupack that is built with external charging contacts – for easy charging with the CHG 2 and a USB socket. It provides up to 15 hours of operating time on a full charge. Finally, Sennheiser Control Cockpit software (download) offers easy handling, control, and maintenance for the SpeechLine Digital Wireless System. It provides a global overview of all network-enabled devices, shows all status information, and makes setting adjustments very easy. Sennheiser ME 2 Omnidirectional Lavalier Microphone with Locking 3.5mm Connector (Black) The black Sennheiser ME 2 is a miniature professional lavalier microphone featuring a locking 3.5mm connector for Sennheiser transmitters and engineered for reliable, interference-resistant performance with wireless systems—making it a popular choice for presentations, interviews, broadcast work, and film/video applications. With a speech-focused frequency response from 50 Hz to 18 kHz, the ME 2 filters out muddying lows and extreme highs to provide clear, intelligible results for instructors, journalists, and presenters in need of a solid workhorse lavalier they can depend on. The mic handles SPL levels up to 130 dB without distorting, while the omnidirectional polar pattern picks up sound from 360° around the capsule, helping to deliver consistent levels, even when the talent turns away from the capsule. The ME 2 features a durable 5.2’ cable that provides ample room for movement and terminates in a locking 3.5mm connector wired for Sennheiser wireless transmitters. The electret condenser capsule requires 7.5V of power from your wireless transmitter, portable audio recorder, or similar compatible device. An integrated windscreen helps to reduce wind noise, and a lapel clip is included. Locking 3.5mm Connector Compatible Wireless Transmitters Sennheiser: Works with Sennheiser transmitters equipped with a locking 3.5mm connector, including the following models: SK 100 G1, SK 100 G2, SK 100 G3, SK 100 G4, SK 1093, SK 20, SK 300 G1, SK 300 G2, SK 300 G3, SK 300 G4, SK 500 G1, SK 500 G2, SK 500 G3, SK 500 G4, SK AVX, SK D1, SK-XSW, SL Bodypack DW, EW-D SK, EW-DX SK, and XSW-D MINI JACK TX Third-Party Devices: The ME 2 will work with many third-party wireless transmitters and portable audio recorders that are equipped to supply 7.5V through a locking 3.5mm connector with a Sennheiser wiring configuration. Industry-Proven Performance Headroom for Standard Vocal Applications The ME 2 is designed to handle up to 130 dB SPL without distorting, providing headroom for broadcast-quality interviews, speech, and dialog. Omnidirectional Polar Pattern The forgiving omnidirectional polar pattern picks up sound from all around the mic and provides a consistent frequency response, even for off-axis sound. This helps to supply clear, intelligible speech and vocals, even when the talent isn't speaking directly toward the microphone. Speech-Centered Frequency Response With a frequency range from 50 Hz to 18 kHz, the ME 2 filters out unnecessary high and low frequencies for accurate and transparent speech reproduction. Optimized for Wireless The ME 2 has been engineered with an updated capsule and a more durable cable featuring a gold connector to better resist interference and provide a strong signal when used with wireless systems.
SR 2050 IEM BW-X Twin Stereo Transmitter
Sennheiser 503851 (503-851, 503/851, 50-38-51, 503 851) (SR-2050-IEM -BW-X, SR/2050/IEM /BW-X, SR 2050 IEM BW X) SR 2050 IEM BW-X Twin Stereo Transmitter Aside from being designed as a twin transmitter, SR 2050 is identical to SR 2000, and like its single counterpart, it is also network compatible. In other words: Through the Ethernet connections, you can monitor and control SR 2050 from your PC using Sennheiser's Wireless Systems Manager software. You can also easily link other network-compatible components from other Sennheiser series.
SR 2050 IEM GW-X Twin Stereo Transmitter
Sennheiser 503847 (503-847, 503/847, 50-38-47, 503 847) (SR-2050-IEM-GW-X, SR/2050/IEM/GW/X, SR 2050 IEM GW X) SR 2050 IEM GW-X Twin Stereo Transmitter Aside from being designed as a twin transmitter, SR 2050 is identical to SR 2000, and like its single counterpart, it is also network compatible. In other words: Through the Ethernet connections, you can monitor and control SR 2050 from your PC using Sennheiser's Wireless Systems Manager software. You can also easily link other network-compatible components from other Sennheiser series.
SR 2050 IEM-GBW Twin Stereo Transmitter
Sennheiser 504955 (504-955, 504/955, 50-49-55, 504 955) (SR 2050 IEM-GBW, SR 2050 IEM-GBW , SR 2050 IEM-GBW) SR 2050 IEM-GBW Twin Stereo Transmitter Aside from being designed as a twin transmitter, SR 2050 is identical to SR 2000, and like its single counterpart, it is also network compatible. In other words: Through the Ethernet connections, you can monitor and control SR 2050 from your PC using Sennheiser's Wireless Systems Manager software. You can also easily link other network-compatible components from other Sennheiser series.
SR IEM G4-A Stereo Transmitter
Sennheiser 509618 (SR-IEM-G4-A, SR/IEM-G4-A, SR/IEM/G4/A, SR IEM G4 A) SR IEM G4-A Stereo Transmitter. Half-rack stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
SR IEM G4-A1 Stereo Transmitter
Sennheiser 509617 (SR-IEM-G4-A1, SR/IEM-G4-A1, SR/IEM/G4/A1, SR IEM G4 A1) SR IEM G4-A1 Stereo Transmitter. Half-rack stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
SR IEM G4-B Stereo Transmitter
Sennheiser 509620 (SR-IEM-G4-B, SR/IEM-G4-B, SR/IEM/G4/B, SR IEM G4 B) SR IEM G4-B Stereo Transmitter. Half-rack stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
SR IEM G4-E Stereo Transmitter
Sennheiser 509921 (SR-IEM-G4-E, SR/IEM-G4-E, SR/IEM/G4/E, SR IEM G4 E) SR IEM G4-E Stereo Transmitter. Half-rack stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In-Ear Monitoring systems.
SR IEM G4-G Stereo Transmitter
Sennheiser 509619 (SR-IEM-G4-G, SR/IEM-G4-G, SR/IEM/G4/G, SRIEMG4G) Stereo Transmitter Half-rack stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
SR IEM G4-GB Stereo Transmitter
Sennheiser 509910 (SR-IEM-G4-GB, SR/IEM-G4-GB, SR/IEM/G4/GB, SRIEMG4GB) Stereo Transmitter Half-rack stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.
TimoLink RX Wireless DMX Transmitter and Receiver
Godox GD-TimolinkRX (GD/TimolinkRX, GD_TimolinkRX, GDTimolinkRX, GD TimolinkRX) TimoLink RX Wireless DMX Transmitter and Receiver The Godox TimoLink RX is a wireless DMX transmitter and receiver system that allows wired DMX-compatible light fixtures to be controlled wirelessly. It supports the CRMX protocol and automatic frequency hopping to maintain a stable signal up to 300 metres. The module is compatible with fixtures from Godox LD, TL, and Knowled M series, as well as any other DMX-compatible lights without a built-in wireless module. Connectors can rotate 270° to match fixture orientation. The system enables wireless DMX control for film, broadcasting, and theatrical applications.
TimoLink TRX Wireless DMX Transceiver
Godox GD-TimolinkTRX (GD/TimolinkTRX, GD_TimolinkTRX, GDTimolinkTRX, GD TimolinkTRX) TimoLink TRX Wireless DMX Transceiver The Godox TimoLink TRX is a wireless DMX transceiver that converts standard wired DMX consoles into wireless controllers. It supports CRMX-compatible fixtures and can integrate non-CRMX lights using TimoLink RX receivers. Bluetooth connectivity allows control via the Godox KNOWLED App on iPad or Android devices. The system includes automatic frequency hopping for stable transmission up to 300 m. Rotatable connectors and a mode menu with “Set” and “Reset” buttons provide flexible installation and easy device configuration.
Sony MB-X6 (MBX6, MB X6, MB/X6) Tuner Base Unit The Sony MB-X6 UHF Tuner Base Unit features a modular design that conveniently accommodates up to six WRU-806A and URX-M1 tuner modules. Up to six transmitters may be used simultaneously with six tuner modules installed. The rear panel provides six XLR (mic/line selectable) outputs and a stereo mix output. The MB-X6 features a single 19" rack space design and operates on channels 30 through 69. Wide Frequency Range This MB-X6 tuner base operates in UHF-TV channels 30 through 69. WL-800 series wireless systems are compatible. Up to Six Tuner Modules Up to six WRU-806 or URX-M1 may be installed for simultaneous operation of up to 6 wireless transmitters. Internal Active Antenna Divider Built-in antenna divider sends an amplified signal to all six channels with optional AN-820A antennas. Antenna Gain Switch An antenna gain switch adjusts antenna sensitivity to prevent overload of antenna section of receiver. Output Level Switch Selects mic or line operating level for all outputs.
TX UHD/HD Wireless Video Transmitter and Receiver System - Transmitter only
Atomos AOATOMTXSL01 (AO-ATOMTXSL01, AO/ATOMTXSL01, AO_ATOMTXSL01, AO ATOMTXSL01) TX UHD/HD Wireless Video Transmitter and Receiver System - Transmitter only Atomos TX-RX: UHD/HD Wireless Video Transmission System Enhance your production workflow—on set, on location, or in the studio—with the Atomos TX-RX, a professional-grade wireless video transmitter and receiver system. Engineered for ultra-low-latency performance, it delivers stunning 4K HDMI and HD-SDI video over long distances without the need for cables. Seamless Wireless Monitoring TX-RX ensures smooth, real-time video transmission from camera to monitor, monitor to monitor, or even to mobile devices. It allows production crews to freely move, reposition gear, or shoot handheld—keeping director and client monitors connected at all times via reliable 5G Wi-Fi technology. Field-Ready, Professional Performance Compact yet powerful, TX-RX offers up to 300 meters (985 feet) of range with latency as low as 0.06 seconds. The receiver includes both SDI and HDMI outputs, supporting multiple monitors simultaneously. Each transmitter can connect to up to four receivers, making it ideal for multi-camera, multi-monitor environments—from single-operator setups to full production teams. Scalable & Reliable for Any Setup Perfect for filmmakers, broadcasters, and content creators, TX-RX adapts to any workflow with ease. Its lightweight, rugged build ensures durability without sacrificing portability or performance. Flexible Power Options Power the TX-RX with DC input (9–16V), USB-C (5V/2A), or standard NP-F batteries—ideal for both studio and remote shoots. Mobile Monitoring Made Easy Use the free Atomos app to turn your iOS or Android device into a wireless receiver and monitor video in real time—no extra hardware required.
UK Power Supply Digital Wireless Half Rack Size Receiver
Sony ZRX-HR70//K (ZRX/HR70//K, ZRX_HR70//K, ZRX HR70//K) UK Power Supply Digital Wireless Half Rack Size Receiver The ZRX-HR70 is supplied with the DWZ-M70 and DWZ-B70HL packages. A large colour LCD display provides detailed visual status of your selected channel, signal, and five-band digital equalizer, along with audio level, and transmitter battery life. The system also includes AES 128-bit encryption technology to ensure highly secure transmission.
URX-P40-K21 UHF Portable Receiver for UWP-D Series
Sony URX-P40-K21 (URX-P40/K21, URX-P40_K21, URXP40-K21, urx-p40-k21) UHF Portable Receiver for UWP-D Series The new Sony URX-P40 / K21 is a portable UHF receiver with a frequency range of 470 - 542 MHz (channels: 21 - 29). The UWP-D series offers excellent sound quality with digital processing, reliable RF transmission, true double-sub-diversity reception and user-friendly functions. The receiver is compatible with Sony's WL-800 and UWP series. This makes it the ideal partner for ENG (electronic reporting) and EFP (electronic field use) as well as for documentation and weddings. The demand for high quality audio increases with the increase in high definition content in the video production industry. Today's content creators are faced with the challenge of recording high quality audio files quickly, reliably, and with limited resources. Digital audio processing for high quality sound Advanced digital audio processing technology by Sony assures high quality sound with improved transient response performance. A new [optional] digital audio interface enables direct digital sound recording with many Sony professional camcorders and Alpha interchangeable lens cameras via the SMAD-P5 Multi Interface MI shoe adaptor, bypassing A/D and D/A conversion stages to further ensure excellent sound quality. Seamless camcorder integration Integration with compatible* Sony camcorders (requires SMAD-P5 Multi Interface shoe adaptor) displays audio information such as RF level meter, audio mute status and transmitter low battery alert in the camera’s viewfinder. Via the SMAD-P5, audio signals are transmitted from receiver to camera without requiring a cable connection. The wireless receiver can also receive power from the camera, with synchronised power on/off between camera and receiver for more effective power management. *See details on SMAD-P5 for compatibility information. Fast, easy frequency setting Sony’s uniquely user-friendly NFC SYNC feature allows quick, intuitive secure channel setting between transmitter and receiver. Light, compact design Reduced system size and weight enable superior mobility in a wide range of applications including news, documentaries, weddings and remote production. The receiver’s compact size and light weight make it an ideal partner for use small camcorders and interchangeable lens digital cameras.
URX-P40-K42 Portable UWP-D Receiver
Sony URX-P40-K42 (URX-P40/K42, URX-P40_K42, URXP40K42, urp_p40-k42, urx-p40/k42) Portable UWP-D Receiver The demand for high quality audio is increasing as high resolution content becomes prevalent in the video production industry. Today's content creators are faced with the challenge of capturing high-quality audio quickly, reliably and with limited resources. Offering superb sound quality with digital processing, reliable RF transmission, true double tuner diversity reception and friendly features, the UWP-D series is an ideal partner for ENG (electronic news gathering) and EFP (electronic field production), as well as documentaries and weddings. High quality sound with Sony digital audio processing NFC SYNC function for quick and easy secure channel setting (IR sync capability with URX-P03, URX-P03D, and URX-S03D receivers) Auto gain mode volume control 15 dB gain volume boost mode for off-mic audio Line input 48V power supply Transmitter frequency sent to receiver for matching multiple receivers to one transmitter Variable muting function Compatibility with Sony WL-800/UWP/UWP-D series High visibility OLED display, ideal for indoor/outdoor use USB connector for power supply.
UTX-B03/K51 UWP-D Belt Pack Transmitter
Sony UTX-B03/K51 (UTX-B03-K51, UTX/B03/K51, UTX_B03_K51, UTXB03K51, utx-b03/k51) UWP-D Belt Pack Transmitter UWP-D digital audio processing for high quality sound The UWP-D Series wireless microphone systems uses Sony Digital Audio Processing to improve sound quality and transient response performance compared to conventional analogue wireless systems. It provides superb transient response performance. Analogue companding systems cannot accurately reproduce sounds such as a bell, tee shot or handclap, but Sony Digital Audio Processing reproduces them faithfully. Large display for ease of use The UTX-B03 belt-pack transmitter features a bright 11.5mm x 27.8mm display, significantly larger than previous UWP models to make them easily readable in all situations. Automatic channel setting The receiver will automatically set the transmitter channel by IR Sync. Wide frequency coverage The extra wide switching bandwidth covers a wide area, with a wide choice of channels available across - please refer to product specifications for more information. True Diversity reception system The UWP-D system achieves exceptionally stable audio signal being delivered from two independent receiver sections within the unit. Optimum signal quality is delivered by the two receivers sections and a comparison circuit constantly pulls the one with the best signal to give dropout free transmission. Compatibility with Sony 800 and UWP Series analogue audio receivers The UWP-D Series transmitters and receivers are also compatible with Sony’s WL-800 Series, UWP Series and Freedom Series, allowing users to switch between different companding modes. USB for external power supply or charging batteries The UTX-B03 belt-pack transmitter has a micro USB terminal for connection to USB external portable power sources allowing the unit to be powered by the camcorder during use, resulting in hassle free power. You can also load NiMh batteries into the belt-pack to be charged through the micro USB. Robust metal body The UTX-B03 belt-pack transmitter is made of strong, durable metal. Metal construction supports reliable use in rough operating conditions. Line Input available The UWP-D Series system has line input available for added flexibility. Important Notes: This product is available in a variety of different frequency range models to suit the regulatory requirements of individual countries. Please contact your Sony reseller for more information on which product will best suit your specific needs.
UTX-B03HR/K21 UWP-D Body-Pack Transmitter
Sony UTX-B03HR/K21 (UTX-B03HR-K21, UTX/B03HR/K21, UTX_B03HR_K21, UTXB03HRK21, utx-b03hr/k21) UWP-D Body-Pack Transmitter The UTX-B03HR body-pack transmitter forms part of a complete UWP-D audio system offering the sound quality of digital audio processing combined with the reliability of analogue FM modulation . It offers wide frequency coverage with up to 72 MHz bandwidth (depending on region) across a wide range of channels, with a choice of models to choose from. Easy-to-use features include a large display, automatic channel setting function, USB connection for power supply and line input availability. The UWP-D Series system provides superb transient response performance for all ENG / EFP production applications. SMC9-4S microphone input connector The UTX-B03HR is equipped with a SMC9-4S (female) microphone connector designed to withstand the rigors of ENG shooting. A standard broadcast lavalier microphone ECM-77BC or ECM-44BC can be used with the connector. Digital Audio Processing for high quality sound Improves transient response performance between the UWP-D transmitter and receiver, providing impressive natural sound quality compared to conventional analogue wireless systems. Wide frequency coverage with choice of channels available The extra wide switching bandwidth covers a wide area, with a wide choice of channels available across multiple models – please refer to product specifications for more information. Easy to use features Large display, automatic channel setting function, USB connection for power supply and line input availability. SMC9-4S microphone input connector The UTX-B03HR is equipped with a SMC9-4S (female) microphone connector designed to withstand the rigors of ENG shooting. A standard broadcast lavalier microphone ECM-77BC or ECM-44BC can be used with the connector. UWP-D Digital Audio Processing for high quality sound The UWP-D Series wireless microphone systems uses Sony Digital Audio Processing to improve sound quality and transient response performance compared to conventional analogue wireless systems. It provides superb transient response performance. Analogue companding systems cannot accurately reproduce sounds such as a bell, tee shot or handclap, but Sony Digital Audio Processing reproduces them faithfully. Large display for ease of use UTX-B03HR body-pack transmitter features a bright 11.5mm x 27.8mm display, significantly larger than previous UWP models to make them easily readable in all situations. Automatic channel setting The receiver will automatically set the transmitter channel by IR Sync. Wide frequency coverage The extra wide switching bandwidth covers a wide area, with a wide choice of channels available across - please refer to product specifications for more information. True Diversity reception system The UWP-D system achieves exceptionally stable audio signal being delivered from two independent receiver sections within the unit. Optimum signal quality is delivered by the two receivers sections and a comparison circuit constantly pulls the one with the best signal to give dropout free transmission. Compatibility with Sony 800 and UWP Series analogue audio receivers The UWP-D Series transmitters and receivers are also compatible with Sony’s WL-800 Series, UWP Series and Freedom Series, allowing users to switch between different companding modes. USB for external power supply or charging batteries UTX-B03HR body-pack transmitter has a micro USB terminal for connection to USB external portable power sources allowing the unit to be powered by the camcorder during use, resulting in hassle free power. You can also load NiMh batteries into the belt-pack to be charged through the micro USB. Robust metal body UTX-B03HR body-pack transmitter is made of strong, durable metal. Metal construction supports reliable use in rough operating conditions. Line Input available The UWP-D Series system has line input available for added flexibility.
Sony UTX-B2V-67 (UTXB2V-67, UTX B2V-67, UTX/B2V-67, UTX_B2V-67) TX Lavalier. Sony TX lavalier 838 MHz - 862 MHz.
UTX-B40-K21 Wireless Bodypack Transmitter
Sony UTX-B40-K21 (UTX-B40/K21, UTX-B40_K21, UTXB40-K21, utx-b40/k21) Wireless Bodypack Transmitter The Sony UTX-B40 / K21 is a portable UHF synthesized transmitter with a frequency of 470 - 542 (channels 21 - 29). The UWP-D series offers excellent sound quality with digital processing, reliable RF transmission, true dual tuner diversity reception and user-friendly functions. The transmitter is compatible with Sony's WL-800, UWP and UWP-D series. Digital audio processing for high quality sound Sony's advanced digital audio processing technology ensures high-quality sound with improved transient response performance. A new digital audio interface [optional] enables direct digital sound recording with many Sony professional camcorders and Alpha interchangeable lens cameras via the SMAD-P5 Multi Interface Shoe Adapter, skipping the A conversion / D and D / A to further ensure excellent sound quality. Quick and easy frequency setting The easy-to-use Sony exclusive NFC SYNC feature enables quick and intuitive secure channel setup between the transmitter and receiver. Compact and lightweight design The system's reduced size and weight allows for superior mobility in a wide variety of applications including newscasts, documentaries, weddings and remote production. The compact size and light weight of the receiver make it the ideal complement to use small size interchangeable-lens digital cameras and camcorders.
UTX-B40-K42 UHF Synthesized Transmitter
Sony UTX-B40-K42 (UTX-B40/K42, UTX-B40_K42, UTXB40-K42, utx-b40-k42) UHF Synthesized Transmitter The Sony UTX-B40 / K42 is a portable UHF synthesized transmitter with a frequency of 638 - 694 (channels 42 - 48). The UWP-D series offers excellent sound quality with digital processing, reliable RF transmission, true dual tuner diversity reception and user-friendly functions. The transmitter is compatible with Sony's WL-800, UWP and UWP-D series. The demand for high quality audio is increasing as high resolution content becomes prevalent in the video production industry. Today’s content creators are faced with the challenge of capturing high-quality audio quickly, reliably and with limited resources. Offering superb sound quality with digital processing, reliable RF transmission, true double tuner diversity reception and friendly features, the UWP-D series is an ideal partner for ENG (electronic news gathering) and EFP (electronic field production), as well as documentaries and weddings.
UTX-P40-K21 Wireless Plug-On Transmitter
Sony UTX-P40-K21 (UTX-P40/K21, UTX-P40_K21, UTXP40-K21, UTXP40/K21, utx_p40/k21) Wireless Plug-On Transmitter The Sony UTX-P40 is a wireless plug-on transmitter compatible with the URX-P40 camera-mount receiver. Compact and lightweight, with a robust, all-metal construction, this plug-on is well suited for tough operating conditions. It provides up to 6 hours of operation on two AA batteries, with a selectable 5/40mW RF power output and a transmission range up to 330'. The UTX-P40 can be attached to a handheld microphone of your choice for man-on-the-street interviews, or to a shotgun mic for wireless booming (both types of mics are available separately). The plug-on provides 48V phantom power, giving you the option to use a condenser microphone. The transmitter offers a 72 MHz bandwidth with 2772 selectable UHF frequencies. The UTX-P40 is backward-compatible with Sony WL-800 and UWP Series systems.0 different capsules from various manufacturers. The UTX-M40 is backward-compatible with Sony WL-800 and UWP Series systems. Frequency CE 470,025 - 542,000 MHz.
UTX-P40-K42 Digital Wireless XLR Plug-on Transmitter
Sony UTX-P40-K42 (UTX-P40/K42, UTX_P40_K42, UTXP40/K42, UTX-P40_K42, utx-p40/k42) Digital Wireless XLR Plug-on Transmitter The Sony UTX-P40 / K42 is an XLR plug-on transmitter for the WL-800, UWP and UWP-D series and works in the frequency range of 638 - 694 MHz (channels 42 - 48). The UWP-D series offers excellent sound quality with digital processing, reliable RF transmission, true dual tuner diversity reception and user-friendly functions. The demand for high quality audio is increasing as high resolution content becomes prevalent in the video production industry. Today’s content creators are faced with the challenge of capturing high-quality audio quickly, reliably and with limited resources. Offering superb sound quality with digital processing, reliable RF transmission, true double tuner diversity reception and friendly features, the UWP-D series is an ideal partner for ENG (electronic news gathering) and EFP (electronic field production), as well as documentaries and weddings. The UWP-D26 package includes the UTX-B40 bodypack transmitter, UTX-P40 XLR plug-on transmitter and URX-P40 receiver, plus accessories.
UWP-D26-K21 XLR Wireless Microphone Transmitter and UWP-D Bodypack
Sony UWP-D26-K21 (UWP-D26-K21, UWP_D26_K21, UWPD26K21, UWP D26 K21, uwp-d26/k21) XLR Wireless Microphone Transmitter and UWP-D Bodypack The Sony UWP-D26 is a dependable camera-mount wireless combo microphone system that delivers uncompromising audio quality, while still being easy to use and fast to set up with no menu diving. It is made with simplicity in mind for DIY cameramen, videographers, vloggers, and journalists working in the field without a crew. The system is packed with professional features including NFC Sync and Auto-Gain functions, which handle time-consuming frequency setup and mic-level adjustments for you, so you're ready to shoot within seconds. Rugged and lightweight, the UWP-D26 includes a bodypack transmitter with an ECM-V1BMP omnidirectional lavalier mic. Also included is a plug-on transmitter, which can be attached to a handheld microphone of your choice for man-on-the-street interviews, or to a shotgun mic for wireless booming (both types of mics are available separately). The plug-on provides 48V phantom power, giving you the option to use a condenser microphone. The low-profile camera-mount receiver is designed for enhanced mobility with compact camcorders and smaller DSLR/mirrorless cameras. It offers digital signal processing for pristine audio and analog UHF transmission with true-diversity reception for reliability-even under difficult shooting conditions. Sony shooters can take advantage of the SMAD-P5 digital MI Shoe adapter (available separately), which provides a direct, clean digital audio connection to select cameras equipped with a digital Multi Interface Shoe. With the UWP-D26 you can focus on the other critical elements competing for your attention during a shoot, and confidently record crisp, clear speech or dialog for projects ranging from documentaries to wedding videos, YouTube content, corporate spots, and hands-free interviews. The UWP-D26 is backward-compatible with Sony WL-800 and UWP Series systems. Note: While this system includes two transmitters, only one can be used at a time.
Wireless LAN / Modem Adapter with SDI Input for XDCAM
Sony CBK-WA100 (CBK_WA100,CBK/WA100, CBK WA100) Wireless LAN / Modem Adapter with SDI Input for XDCAM Sony CBK-WA100 Wireless Adapter for XDCAM EX Camcorders Mobile network 3G / 4G / LTE / Wi-Fi wireless adapter for XDCAM EX camcorders Enables easy transmission of content over a wireless network significantly accelerating the ENG workflow The CBK-WA100 adapter connects directly to a camera and allows XAVC proxy files to be created and then saved on an SD card in the adapter. The CBK-WA100 is then able to upload the proxy content and the original high-resolution content via 3G/4G/LTE/Wi-Fi* to a broadcast station, on premise server or to a cloud environment. Tablet or smartphone control via Wi-Fi By supporting Wi-Fi connectivity, the CBK-WA100 allows tablets or smartphones to interact with it and control it via Sony’s Content Browser Mobile application. This connectivity for XDCAM camcorders allows users on their mobile device to remotely control the camera, logging metadata on set and reviewing content without having to connect a monitor to the camcorder. For wireless transmission, Wi-Fi/3G/4G/LTE dongles are necessary. For Wi-Fi dongle, Sony’s “IFU-WLM3”, 2.4GHz Wi-Fi dongle is available. As for the Modem dongle, recommended model differs country by country depending on carrier.
Wireless Mobile Network / Wi-Fi Adapter for PMW-400 Camcorder
Sony CBK-WA101 (CBK_WA101, CBK/WA101, CBK WA101)(PMW_400, PMW/400) Wireless Mobile Network / Wi-Fi Adapter for PMW-400 Camcorder The Sony CBK-WA101 Wireless Adapter connects directly to the PMW-400 camcorder body to enable easy transmission of content over a wireless network. Once attached it allows XAVC proxy files to be created and then saved on an SD card inside the adapter. The CBK-WA101 is then able to upload the proxy content and the original high-resolution content (depending on the model) via 3G/4G/LTE/Wi-Fi* to a broadcast station, on-premises server or to a cloud environment. Tablet or smartphone control via Wi-Fi By supporting Wi-Fi connectivity, the CBK-WA101 allows tablets or smartphones to interact with it and control it via Sony’s Content Browser Mobile application. This connectivity for the PMW-400 camcorder allows users on their mobile device to remotely control the camera, logging metadata on set and reviewing content without having to connect a monitor to the camcorder For wireless transmission, Wi-Fi/3G/4G/LTE dongles are necessary. For Wi-Fi dongle, Sony’s “IFU-WLM3”, 2.4GHz Wi-Fi dongle is available. As for the Modem dongle, recommended model differs country by country depending on carrier.
X3L Xnano Leica TTL Wireless Flash Trigger
Godox GD-X3L (GD/X3L, GD_X3L, GDX3L, GD X3L) X3L Xnano Leica TTL Wireless Flash Trigger Godox has revolutionised Touch Screen TTL Wireless Camera Flash Trigger with the innovative X3L (Xnano), designed for Leica cameras. Featuring a sleek, minimalistic design with a built-in capacitive OLED touchscreen, this trigger is designed to streamline your workflow to new and unprecedented levels. Featuring TTL and HSS (High-Speed Sync) modes, along with stroboscopic multi-flash, front and rear curtain sync modes, the X3L will empower you to effortlessly control our Godox flash lighting, unlocking even more potential and efficiency with your creative pursuits. Also available for Canon, Nikon, Sony, Olympus/Panasonic, and Fujifilm. Just Tap and Swipe The X3L wireless camera flash trigger features an innovative capacitive touch screen, which enables you to effortlessly navigate through its user-friendly and intuitive interface with a simple swipe or a tap. Just like other Godox X-Series flash triggers, the X3L supports TTL and stroboscopic multi-flash modes, as well as High-speed sync and front and rear curtain sync. High-Definition OLED Screen Due to its vivid OLED capacitive touchscreen, the Godox X3L flash trigger features a high-contrast display and rapid refresh rate for an incredible viewing experience. With the ability to effortlessly adjust screen brightness by sliding left or right to suit your surroundings, the X3L camera flash trigger is perfect for both indoor and outdoor use.
ZRX-C30//CEK Digital Wireless Compact Receiver
Sony ZRX-C30//CEK (ZRX-C30-CEK, ZRX/C30/CEK, ZRX_C30_CEK, ZRXC30CEK, zrx-c30//cek) Digital Wireless Compact Receiver The ZRX-C30 is supplied with the DWZ-B30GB package. With three types of powering (DC 9 V battery, AC 12 V adaptor, or DC 9 V jack) the receiver provides wired / wireless seamless operation, is pedal board-ready and includes a built-in antenna to protect against rough handling conditions. The ZRX-C30 receiver includes 3 simultaneous audio outputs (1 x balanced XLR and 2 x unbalanced 1/4-inch phone). The receiver also supports flexible powering options with AC adapter, 9V battery or use of a distributed 9V power system.
ZRX-C30//EU Digital Wireless Pedalboard Receiver
Sony ZRX-C30//EU (ZRX-C30-EU, ZRX/C30/EU, ZRX_C30_EU, ZRXC30EU, zrx-c30//eu) Digital Wireless Pedalboard Receiver The ZRX-C30 Digital Wireless Pedalboard Receiver from Sony is capable of receiving 24-bit linear PCM digital signals and is designed to be used with DWZ series wireless systems. It has both XLR and 1/4" instrument outputs and can be integrated into your pedalboard for use in wireless instrument applications. Its cable tone generator allows you to emulate the frequency response of a fully wired system, allowing you to use the same amp settings between wired and wireless setups. The ZRX-C30 can be powered by a 9-volt battery, the included AC adapter, or via its 9-volt DC jack, allowing it to be powered by your pedalboard power supply. It has a metal body to endure the rigors of being on a pedalboard while its antenna in internal to avoid damage. The 1/4" tuner output allows you to run your signal straight to a stomp box tuner.
ZRX-HR50//CEK Digital Wireless Half-Rack Receiver
Sony ZRX-HR50//CEK (ZRX-HR50-CEK, ZRX/HR50/CEK, ZRX_HR50_CEK, ZRXHR50CEK, zrx-hr50//cek) Digital Wireless Half-Rack Receiver It features Sony's Clear Channel Scan and Best Channel Selection that scan available frequencies and tunes itself to clearest channel for quick setup. It has two RF modes to select from, wide band hopping and narrow band hopping, allowing you to choose the mode that will provide the least amount of interference based upon the RF environment you are in. The ZRX-HR50 has a front-panel colour LCD that provides a readout of your selected channel, audio level, and transmitter battery life. The rotary encoder allows you to make adjustments to the system, including the 5-band equalizer. The unit has a balanced XLR output that you can assign to mic or line level in additional to an unbalanced 1/4" out. A second 1/4" tuner output allows you to integrate the ZRX-HR50 into a wireless instrument system.
ZRX-HR70//EU DWZ Series Digital Wireless Half-Rack Receiver
Sony ZRX-HR70//EU (ZRX-HR70-EU, ZRX/HR70/EU, ZRX_HR70_EU, ZRXHR70EU, zrx-hr70//eu) DWZ Series Digital Wireless Half-Rack Receiver The ZRX-HR70 is supplied with the DWZ-M70 and DWZ-B70HL packages. A large colour LCD display provides detailed visual status of your selected channel, signal, and five-band digital equalizer, along with audio level, and transmitter battery life. The system also includes AES 128-bit encryption technology to ensure highly secure transmission.